How to install door latch and handle How to fit door handle and lock
Vložit
- čas přidán 21. 08. 2024
- Hi . This video is about how to fit a door latch and door handle in an interior door. Tools needed for this job: tape measure, pencil , flat drill bit for wood {size 25 }, electric drill, screwdriver. Hope it helps in your DIY projects. Please Subscribe Thanks
He didn't just butcher the door with the chisel because "you wont see it anyway" like most would, very careful and precise with the chisel, respect mate!
whole 12 minutes i was hooked up without ever once thinking of leave the video. if only movies could hook you that much 😃
A nice tip I learned years ago when marking the face plate on lock and also the receiver, screw them on and use a Stanley knife to mark around the edges instead of the pencil. That way you get super accuracy and no need to chisel pencil lines, just clear out inside the Stanley lines. Same works great with hinges.. Nice work..
Nice prompt, thanks)
Also why not to cut latch and face plate while door isn't hanged yet?
Always do this very good
Brilliant video. Just bought a house that's a doer-upper. Everything is from the 70s - so having to replace doors and handles and such. Don't have the money for a pro, but I'm fairly handy with DIY. But had no idea how to put a door handle on! This video was a perfect demonstration! Thank you :)
Pretty much the same for me! I’m just doing things bit by bit one step at a time. We will get there
@@Alexander_l322how's it going now or have you finished
Same
Same....again! And mines from the 70s, too.
Always love watching a pro do their thing!
Nicely done. I appreciated your attention to detail with the chisel.
Thank you so much for the video. Very good demonstration, exactly what I needed!
I'm so glad you showed the door closing afterward, just for - pardon the pun - closure xD Only the living room door in my new flat closes, so I'm looking at tweaking every other existing latch :P
Top tip - when you decide where you're going to put the fixings on the door - just check that where it's going to meet up with the catch plate on the frame there's not a bloody great knot!
You're simply the best. I love all your videos.
thank you for making this video, extremely useful!
Easiest tutorial I’ve found! Thanks man🫡
Brilliant, thank you. 👍
Thanks you so much almighty Allah swt bless you brother!!!🤲🤲🤲
Brother, only Jesus saves. I pray that you may seek Him and find Him. GOD BLESS 🙌 🙏 ❤
Da vinci code
@@btbro5172😂 Jesus couldn’t save himself forget forget humanity ..
Till this day we still look up things like this THANK YOU , Because I sure was just staring at this door knob 😂😂😂🤣🤣🤣
Thanku for this video
I'm on my doors this week
Great job bro.. I'm confident watching this video that I can do the same ... never done it before, but I'm good with chissles ...
Nice.. Very comprehensive video. Thanks
Brilliant just got to do this for my brother tomorrow.
Brilliant video, thanks!
Your the man, keep up the good work, thanks
Hi. Great stuff. Nice job. 👍. Thank you for sharing. 👌
Very good .now let's see if I can do !!😁
So helpful, thank you!
Thank you so helpful us all.
Great. Wanted to see the chisel part
Thank you
Great demo 🙂
dude, awesome brilliant, simple, complete. thank you
Very good video.. explained well and as previous viewer said great clean work with the chisel
beautifully done how to video. thank you
Many many thanks, very good instructions and nicely shown. 😎👍🏻👍🏻
Thanks you made it easy for me
Nice music soundtrack 😀
who knew sped up chiselling would be so satisfying to watch 😂
Just what I need not know for this weekends door fest 😅
Great video my friend. 👍
This is great video...thank you!
I like ur tools
Nice tips
Brilliant informative video Thankyou!
nice guy nice video
Use a trim router for my recessing of latch plates etc and I fit my door stops last, but nice video
Thanks for sharing your knowledge mate 👍👍👍
Good job 👍
What size drill bit did you use for the hole for the handle?
dani ribero 20mm
Really good
thank you it was very interesting
loved the video.
Such a good video thanks for the help!
Good vid cheers mate
Annoying how those latches have go so many curved corners, you'd think they would design them with square corners to make it easier to chisel. Good job though :)
Jamie Roberts that actually makes them easier to install in mass quantities, as you can make a jig and just use a small router, similar to radius hinges
Thanks for this, is there a reason why the curved part of the latch 'tongue' has to go on the side that closes?
Really nice video , thanks for taking the time to do these.
Nooice!
what about the spindle rod that goes in??
I still don’t understand why the make these latches so wide that makes is more difficult to chisel out around the plate, or they should make the thickness of doors to a standard that will make it easier
Bravo
Very informative as always 👍
How do you keep your chisels so sharp?
It is a brand new chisel
@@how2d223 niemożliwe:)
Sharpen it when it gets blunt
А как на счет фрезера?
👍👍👍
Thank God for you showing how to do this. May I suggest safety goggles and gloves next time. Don't want you hurting yourself in any way.
Cindy Mc Pherson ahahahaha
This gentleman is not english and that why he is not obsessed about health and safety.
You didn't mention the "Block" and to make sure it's on the correct side. Otherwise the handle screws do not have anything to grip!
Gdzie masz kontownik.
There are many similar projects in Woodglut's plans.
You need to do the work more professionally.
I'd love to see it done professionally by yourself.
....waiting.🙄
freak
Not that easy,the latch cover was thicker than the original so the handle didnt fit,so necessitated chiselling it larger.