Nice run, dude! 10's ... god damn! Even though I'm a Subaru fan, I respect all builds and the passion for all cars. Love the channel dude, just found your stuff and subscribed!
Beautiful setup and clean car! Love that you made small incremental changes before each pass to truly dial in the car. This would not be too hard on a stalled A4 LS2 GTO with weight reduction, but you did it with a SBE 346ci! You and LS1Melissa have done great things with your 04 Goats. :-) Cheers. -Stang2Goat on LS1GTO and LS1tech
Nicely Done!! Congrats on that 10 second pass!! What's your cam specs? I'm going to start working on my GTO again and hopefully drop some 11's on the board.
You ever have this car on the dyno? If so what did your numbers look like all motor 5.7 car running low 11s and high 10s is very impressive congratulations!
@@The1st60ft this sounds exactly like my gto, I'm running the same slp lm1 exhaust and their long tubes/cam. Best sounding exhaust and headers. Worth the price
those are some serious passes props! if u dont mind asking whats your setup? i own a 2006 gto stock 100k mile motor with stock heads full boltons that include headers cold air intake underdrive pulley also cam kit with built trans auto and stall 3600 full exhaust stock gears ran 11.9 and 406 at the dyno
I have a 06 gto also. I ran a 12.3 last time i was at the track. My daughter has a 2016 Camaro ss and she ran a 10.90 @ 126 mph this last weekend. She runs E85, aftermarket heads and cam. Headers and full exhaust. Dynoed at 510 hp at the wheels.
I ran 11.7s just Ls1 Cam/Fast102'Manifold , Stock gears , stock heads, Stock trans , I can maybe get to 11.'6s if. I get a Cold air intake , my filter is sucking too much hot air and adding knock throwing my car off
My trap speed this summer was only 118 it was +2500 DA. In April I had a 1.58 60ft and ran 11.21@121 in DA of 0 to +300 but that was before a built transmission and higher stall converter. Now my 60ft in June was 1.51 but with the +2500 DA the air was not good enough to get me a decent trap speed. I upgraded my air box too which is why I still ran 11.3@118. I think this fall I will get 1.4 60ft and maybe 122 to 123 in trap speed hopefully that equates to a 10.90 ET
@@mustgofasterracing6248 nice man hopefully you get it. If you went up a decent amount in stall make sure you lock the converter to keep that slip down on the top end
im trying to dial in my suspension are you running soft or stiff in the rear i have a full bolt on 04 an for the lif of me i cant get it right i have 250lb spring rate in the rear with qa1 18 way adjustables
@@grimey5.565 thanks man. It's a sbe stock cubic inch car so it doesn't need anything crazy. Those high dollar heads aren't worth it with a setup like this. It's about that Volume vs Velocity balance of air flow. Too big and the air is gonna move slower. Just like a water hose
@@The1st60ft how long did that hold up if u don't mind me asking. Getting ready for a nitrous build on my gto and wondering if I should do stubs and GeForce axles at the least
@@sambert96 the stock rear and axles actually lasted the whole time i owned the car. If its a manual they wouldn't last long at all. I sprayed my car to a 1.49 60ft on a smaller stall
Nice run, dude! 10's ... god damn! Even though I'm a Subaru fan, I respect all builds and the passion for all cars. Love the channel dude, just found your stuff and subscribed!
NinjaxBart thanks man! appreciate the support!
:) Cheers dude!!!
Beautiful setup and clean car! Love that you made small incremental changes before each pass to truly dial in the car.
This would not be too hard on a stalled A4 LS2 GTO with weight reduction, but you did it with a SBE 346ci! You and LS1Melissa have done great things with your 04 Goats. :-)
Cheers. -Stang2Goat on LS1GTO and LS1tech
Thank you! I appreciate that 🤘
awesome video! so cool to see it drop time every pass
10secCamaro,12secVette thanks! like share and subscribe!
Daaaaaamn! That LS1 runs effing good
Love to see the 04/a4. They sleepin on us!
People think these cars weight so much. But they are lighter than any muscle car 2010 and newer
no...no theyre not
Awesome video man! Heard it was a big day and got engaged later that day on the track :)
Hahaha thanks man! Yeah it was!
Has the car dropped any weight? Interior delete stripped and such? These things weigh so god damn much. Congrats on making 10's! She sounds good.
claponlamps thanks! yes rear and passenger seats were out along with other random things like spare/jack etc.
Congratulations
Gahh. Sounds so good😍
10s All Motor!? Damn!
Thanks!
Nicely Done!! Congrats on that 10 second pass!! What's your cam specs? I'm going to start working on my GTO again and hopefully drop some 11's on the board.
v8pontiacvent thanks man. It's custom grind Cam. Good luck with the build
What size tire and wheel are you running? Backspacing/ offset, width etc? Have trouble finding the right fit
goals
Wish I could get that many passes at my local track.
Ken Hall this was a track rental, so we were able to make passes all day, just us
love the sleeper exhaust!
You ever have this car on the dyno? If so what did your numbers look like all motor 5.7 car running low 11s and high 10s is very impressive congratulations!
Thanks man! I never got to Dyno it unfortunately
The_1st_60ft_Videos that is unfortunate! But none the less awesome car.. have a good evening brotha!
bad ass goat! stock bottom end?
Ronald White yessir stock bottom end ls1
good good bro is it 4l60 trans ? what is gear ratio?
Awesome car. What brand of torque converter do you use?
Valeyart Circle D
High Performance or Pro Series?
Thanks
Valeyart pro series, single disk
What's the exhaust setup? It sounds wicked!!
Kooks Longtubes and SLP LM1
@@The1st60ft I wish I could get my Camaro to sound like that
@@The1st60ft this sounds exactly like my gto, I'm running the same slp lm1 exhaust and their long tubes/cam. Best sounding exhaust and headers. Worth the price
those are some serious passes props! if u dont mind asking whats your setup? i own a 2006 gto stock 100k mile motor with stock heads full boltons that include headers cold air intake underdrive pulley also cam kit with built trans auto and stall 3600 full exhaust stock gears ran 11.9 and 406 at the dyno
I have a 06 gto also. I ran a 12.3 last time i was at the track. My daughter has a 2016 Camaro ss and she ran a 10.90 @ 126 mph this last weekend. She runs E85, aftermarket heads and cam. Headers and full exhaust. Dynoed at 510 hp at the wheels.
I ran 11.7s just Ls1 Cam/Fast102'Manifold , Stock gears , stock heads, Stock trans , I can maybe get to 11.'6s if. I get a Cold air intake , my filter is sucking too much hot air and adding knock throwing my car off
Noticed you went from a 4000 stall to a 3600 any reason?
Nah just Drivability
If you dont mind me asking which heads and cam did you choose?
Tsunami V2 cam and Ported 243s
This is what I'm looking to do in my LS1 02 SS this fall. What was your 60ft?
High 1.5s
Nice I'm already there. 60ft was 1.51 this summer, just waiting for better air in the fall. Hopefully I'll get a 1.4 and a 10.90.
@@mustgofasterracing6248 what is your trap speed? You should be real close with that 60ft
My trap speed this summer was only 118 it was +2500 DA. In April I had a 1.58 60ft and ran 11.21@121 in DA of 0 to +300 but that was before a built transmission and higher stall converter. Now my 60ft in June was 1.51 but with the +2500 DA the air was not good enough to get me a decent trap speed. I upgraded my air box too which is why I still ran 11.3@118. I think this fall I will get 1.4 60ft and maybe 122 to 123 in trap speed hopefully that equates to a 10.90 ET
@@mustgofasterracing6248 nice man hopefully you get it. If you went up a decent amount in stall make sure you lock the converter to keep that slip down on the top end
im trying to dial in my suspension are you running soft or stiff in the rear i have a full bolt on 04 an for the lif of me i cant get it right i have 250lb spring rate in the rear with qa1 18 way adjustables
Holy crap what did this thing weigh
3600lbs with driver
@@The1st60ft holy crap that's thing making like almost 500 wheel on motor prob that's nuts
@@barbellbrady good Texas-speed Heads/cam package!
Still IRS?
Yup
what tires on front and rear
any weight reductions?
Trey Herrera yes
Wassup trey😎
Trey Herrera Whats up 👍🏽.....I was like wait a minute I know this name🤔 Thats right I’m subscribed to his channel Lol
What cam
What gears you running?
Stock
stock 5.7 bottom end?
Yessir
Whats heads are you running? I hear that you can get very good hp gains with the right heads.
Ported 243s
@@The1st60ft Thats it? Damn I am impressed.
@@grimey5.565 thanks man. It's a sbe stock cubic inch car so it doesn't need anything crazy. Those high dollar heads aren't worth it with a setup like this. It's about that Volume vs Velocity balance of air flow. Too big and the air is gonna move slower. Just like a water hose
@@The1st60ft Those slicks you're running are probably a big help too. You hook really really well. Back tire setup?
@@grimey5.565 275/40/17 Drag Radial aired down to 18 psi
Is it a built 4L60e ?
Yessir. Cahill built 4l60 from DE.
how much power is it making?
not sure, never dyno'd it with this setup
kohlman weigel jj
What grill is that
Krystle Diaz stock grill, just painted differently
Atco?
Sachinkhatri921 yes
Vfn hood?
Bryan Hodges yessir
Do you know what the rs ran?
Jonathan Irizarry high 11s
Any suspension work?
Drag Bags and Qa1 single adjustable shocks in the rear. No front suspension
How much did you make power wise?
@@perfectprecision8159 never got to dyno it
Nitrous??
No sir, All-Motor LS1
What were ur 60fts
1.5s
@@The1st60ft nice stock rearend?
@@sambert96 yeah stock rear
@@The1st60ft how long did that hold up if u don't mind me asking. Getting ready for a nitrous build on my gto and wondering if I should do stubs and GeForce axles at the least
@@sambert96 the stock rear and axles actually lasted the whole time i owned the car. If its a manual they wouldn't last long at all. I sprayed my car to a 1.49 60ft on a smaller stall
What exhaust?
Kooks 1 7/8" longtubes, SLP LM1
Awful reaction times.
Reaction time doesnt mean squat genius
It does if you try and bracket race it, you will be packing up after first round Genius.
@jaketaylor4312 doesn't look like bracket racing to me genius! 😅