The fact you went back to square one to start all the testing as you weren't happy with the initial results, is a testament to why I love your videos and your unwavering attention to detail. Still my go to channel for anything car related. I liked this as something a little different too. Nice one Sandro, and hope all is going well for you in 2021. See you in the next one! (also the voice over for Mothers @10:40 is the opposite of the top left text results - this is the one I was most interested in for doing my headlights, autosol just didn't "cut it". Could you clarify which is correct please?)
That's the boat I'm in. I recently discovered Mother's headlight restoration ability (where Meguiar's headlight restoration failed) and it's interesting you say Autosol won't do the job that well, cause I was meaning to try that next. Do you think mother's is safe to be used on car windows and side mirrors also, cause of course, there's a difference between plastic headlights and glass. Haven't tried it yet.
Sandro, you are a rare species and as such we must do our utmost to preserve you. Your reviews are second to none in pare with Apex Detail. How can we support your channel so that you don't become extinct? Same question will go to Brian @Apex Detail. The "others" are just self-promoting themselves and mislead us into spending our hard earned money in products with dubious claims.
Just get a grinder, yellow airway with any brown tripoli compound, white airway with any white/blue/purple finishing compound. Will get you a mirror finish on all metal types. 😉
R&J Metal Polish, that's made in a shed/shop, in the woods east of Ona Beach, which is 8 miles South of Newport,OR. It's an old Harley builders recipe that was purchased by a Father & Son (my former In-Laws). It's the absolute best metal polish that I've ever seen and/or used!
Been following your videos and your rich content. Disappointing that the tried and tested collinite failed to deliver always had high expectations of that brand. Thanks once again for this awesome review. Cheers.
Thanks mate, and Collinite is one of the best names in car waxes, and their metal wax did okay in some of my prior testing and panels leading up to this video, but as a whole and by comparison to the others, it could definitely be a little better.
Came back to add that I’ve used 3D One with a DA, soft foam pad, and high speed to polish delicate plated surfaces. I think as long as your surface isn’t really dealing with the elements for long (think musical instruments), go for a traditional wax that applies well and adds the gloss you like (Meguiars Deep Crystal is a good example). Two coats should suffice for a while. Can’t forget though about Finish Kare 1000P Hi-Temp Wax. Not the shiniest, but this stuff cures very hard and does what it says for pennies on the dollar. This remains a great video that serves as an example of for other testers and reviewers to follow.
Mate, thank you - this is a brilliant comparison video! Your insight, experience and detail on using these for various metals and the way you separated cutting vs finishing is extremely helpful! Definitely the only video I needed to watch tonight and you've saved me heaps of time wondering what to buy. A massive thumbs up and thanks once again! ...now to get this rocker cover reflecting like a mirror...
As a metal worker I say kudos for using all different types of metal as you understand the massive differences 👌🏽 Some polishes aren't even recommended for Chrome Plating. Some worse for wear metals will need a proper compound with a calico buff. But these are great for up keep of a machine polished finish. And chromes. Once I found the Meguiars NXT I kept it in my toolbox for the combination of finish & protection/weatherability it leaves behind. Shame i can't find it readily avail. Anymore. With the Mothers I found a more brilliant finish with the Mothers Billet Polish. And Autosol now has a larger range of products readily available for specific Metals from Aluminium to Gold etc. Which I find a much better finish than the OG autosol. Just my 2 cents. Once again, thanks again for yet another Unmatched review Sandro! Truly my go to channel for anything detailing.
Got a bottle of Mettalicut in the garage that I haven't opened yet. Maybe this is a sign that I need to go polish my STi's exhaust tips and throw some Dlux on afterward.
Hey Sandro! Nice video of some of the many polishes out there. I have the Purple on my shelf as my go to polish and believed before watching your video that it would rank amongst the the 3 if not first! I did do a little research on Carpro New polish and my thoughts initially was that it seemed pretty good...maybe even better then Purple. So I’m stoked about your final results and opinion on the two. Thanks again for taking the time and many hours to bring us these results. Good day mate! 👋🏾
Waaaaoooo , Just big wao, the effort you put in here is just amazing. I recently purchased a Meguiars NXT metal polish, I actually like it really much over Autosol . But having said that, all I need to polish is the exhaust tip trim on my Megane RS265
Yes I like the NXT better as well, and yes it’s also sad that metal tips are just about the only thing most car owners have to metal polish these days!
I use metal polish around the house too. I do all the chrome taps and handles in my bathroom to keep them looking beautiful. My tow ball on my work ute gets a periodical hit too.
I have a 67 Chevelle loaded with chrome, so this video was very helpful. I’ve been using Surf City Garage Killer Chrome for several years. It doesn’t have a lot of defect removal capabilities, but it does finish down extremely well. I am one that really doesn’t require a product for removing heavy oxidation and scratches, so Killer Chrome is a great product to suit my needs. Great video!
Thanks heaps Sandro, I own my own Motorcycle detailing business here is Townsville, the majority of my customers are Harley owners so I see alot of metal and chrome polishing. I typically use 4 things when cleaning and polishing chrome and alloy on a Harley - 0000 Steal wool for chrome, Carpro Metallic Cut for my first initial clean/polish on alloy and then Mother's Mag&Aluminium polish over the top to add that pop. And then usually a coat of wax or I found Carpro Reload layered on a couple times also makes chrome pop really well as a sealant after the entire process. Going to try NV Lustre on this current bike I am detailing & correcting some alloy parts on. Cheers mate - love your channel and is my go to CZcams channel anything detailing!
Meguiar's NXT which you mentioned but did not test, is the best I've ever used on nickel plating on musical instruments. I might add the jar is of a quality level to keep it fresh and moist in the jar for years. I do think the type of metal may vary the results. I may try Auto Finesse based on your results, best finish on this medium soft metal is what I'm after. Thanks.
Very good video! Autosol will forever be my favourite for sentimental reasons. My grandfather used it for everything except toothpaste, I hope, haha! Cheers!
Great video many thanks for doing the hard work in testing and research beacuse I can't be bothered..! But of course want to be informed enough to make the choice , great job I'm very grateful.. Regards.
Great review, Sandro.👍 I have been using Autosol for years. The only parts of my car that I use metal polish on, are the exhaust and rear diff. I use Autosol first and then finish off with Meguiar's NXT metal polish.
Great video, first real metal cleanup review I see. I’ve used the first one and it did a great job but I’ve seen better. I did try something on my side, I have used the ceramic stove/cooker paste cleaner and it did a really good job !
One point is cost too. I just bought Mothers ~142ml for $10 at the local big auto chain store. Autosol was $20 for only 75ml - so twice the qty for half the price makes the Mothers 25% of the cost here (Canada) - is the mothers going to be 4x the elbow grease...im doubting it. Haven't tried it yet but i'll be using it on old motorcycle wheels steel spokes, chrome rim and another aluminum rim so we'll see how it goes!
You should have a look into FERRO'S liquid reflection. i have been using for about 10 years now its its still hands down best metal polish i have ever used
Simply brilliant (damn puns!) video. Any insights from anyone on using these products on musical instruments? Mellophones aren’t cheap (even rented/used ones that deserve a polishing) so I’d prefer to hear from anyone with experience applying polishes to brass or plated brass.
First off love all your videos, secondly upload the 4hrs version I want to see, i have watched more than 4hrs of your videos in one afternoon before. I put my vote for longer videos, to see the reality of what you had to do to get the results in real time would be great for me anyway, keep up the good work mate👍
I appreciate that mate and maybe in the future once I have more 4K footage storage space and a beefier computer I’ll try and put up more behinds the scenes and extra footage for those that might like to see that!
Thanks for doing this as I’m currently working on a microlight aircraft which the unpainted aluminium has certainly tarnished. I was going to use Metall, a aviation type of polish, but already found it is very aggressive and oxidises quickly after completion. Now I have a choice! Thanks.
Sandro! You do outdo yourself each time. A quick question, what is your opinion on Nv Glass Coating vs Nv Glass Lite coating. I would love for you to help me out here as I dont have enough information to make an informed decision.
Glass Lite is really a less durable version of Nova Glass that also has some mild cleaning abilities and can be additionally used to maintain Nova Glass, thanks mate.
There's now metal polish products from Renegade products that would be nice for you to check out too. Seen some like Chicago Auto Pros doing a review and the other one I watched Miranda Detailing. They definitely would be also happy to share with you their impressions.
@@CarCraftAutoDetailing on the livestreams with PapaSmurf918 or Mike's Auto Detailing your name has come because we all admire your work and knowledge. We definitely would love to have you on any of them.👍👌
What about the colored buffing compounds, like the green chromium, rogue, or blue? How would they compare to those pastes in terms of cut, finish, and on different materials? Also, what would car polishes do to metal; can they even cut or finish at all?
I unfortunately don’t have any experience with those coloured compounds, but you can certainly use paint compounds on metal as well - I’ve discussed and shown that it some past videos - they can work well, it just all depends
You should do a video on leather conditioners. I've been trying to find the best for the price that's not greesy and right now its either color lock or dr.beesleys
Super informative video Sandro! What do you mean by ‘finish’? Is it ease of use or gloss? Would a gloss metre (before and after) have helped quantify? Keep up the great work.
Great video! I am working on my Father’s motorcycle than he left to me when he passed. I was curious on what hand polisher you are using in this video. Also what buffing pads do you recommend for polishing motorcycle chrome? Truly appreciate the feedback. Cheers!
Thanks mate and I think that’s a beautiful thing to work on and restore your dad’s motorcycle. I’ll give you a link to the polisher I used in the video and as far as pads go have a look at Microfibre pads if the chrome needs a bit more attention in removing oxidation and light swirls, while foam pads can be great if the chrome just needs a lighter polish to clean it up. The polisher fits any 3” size Velcro pads and there load of different ones around, so just go fit whatever fits your budget. www.waxit.com.au/collections/shine-mate/products/shine-mate-ex-603-12mm
I have a motorcycle with an aluminium and steel frame, the aluminium part has gained little black spots, the bike is 23 years old Every person i ask tells me that its there to stay. My question is, will a product like autosol be able to remove them? Thanks
Typically those corrosive spots on older aluminium are really fused to the metal so that a polish won’t be able to remove them. What can work is quite a more involved process in sanding back the aluminium with coarser grades of sand paper, to medium and then finer grades and then using heavy compounds to medium and finally your metal polish. Basically it’s a lengthy metal restoration required.
Hi Sandro - great video as always. Just wondering how does something like metallicut compare to a paintwork cutting compound in terms of it's ability to remove defects. Something like Scholl S2/S20? I have scratches to remove from tailpipes and saw from another of your videos (a while ago) that you recommended traditional compounds in their place - or have the advances in metal polishes from CarPro etc made it a closer one to call now?
Thanks and yes it would be interesting to test that out, but my gut feeling is that a coarse paint compound will tend to cut more in relation to swirls or scratches but it probably won’t finish as well as most metal polishes. Scratches can be quite difficult to remove from most metals, and equally difficult to refine compounding swirls so you may be in for quite a bit of work!
Right now i am having a problem with my catholic rosary which is used to be gunmetal colour, but now it became silverish colour because of the gunmetal colour been worn off.. so i would like to know which one should i use to repolish back gunmetal colour?
All I ever used was autosol back when in the army on my chrome parts, but I wish I knew what I know now, I'd be busting out the rupes nano to sand and polish 😂
Excellent video mate. I've been using the Purple Polish for a number of years now and found it to be the easiest to use with the best shine on truck wheels. Until now I've been polishing by hand using a non-scratch scouring pad however I would like to make life easier and do it by machine. Any idea what machine and pad might be suitable for Alcoa alloy wheels? I've tried the Mothers Powerball however its just not durable enough.
If the wheels aren’t too intricate in design, a mini 3 DA such as the shine mate ex603 could work well, but if the rims are more complex on design you’ll need to drop down to a 2” or 1” polisher like the Rupes iBrid or Flex PXE 80 - which are quite expensive. If you have access to a good air compressor, the Rupes TA50 is a more affordable and brilliant mini polisher for wheels. The Shine mate microfibre pads are a great affordable option, and the lake county fibre cutting pads are even better but more expensive.
Thanks and I got it from eBay - just search for it and I believe there’s a few options still shipping to Australian! I’d firstly do a quick test section because certain metals are more difficult to refine but that could certainly work.
Great comparison video thank you. Random question for you. Do you think the Mother's Mag and Aluminium would work for uncoated aluminium window frames which are quite oxidised? About 40 years old and looking very worse for wear. Thanks
Thanks and yes, it should work well on bare aluminium trims, it may require quite a bit of elbow grease to cut through that heavy oxidation but you should in any case see a great improvement.
It depends... lol Evo is one of the best single layer coatings on the market, not cheap but fairly easy and forgiving to work with and as a single layer coating it’s very tough to beat. CQUK is amazingly value and if you don’t mind laying down 2-3 coats it looks and performs great if you’re willing to get the larger bottle and take the time to layer it. I’ve had both of them on my cars and been super with the results. UK3.0 + Sic is something I want to try next and see how it goes!
Microfibre is probably the best for cutting as it’s very effective yet still finishes very well. Wool can also cut great but won’t tend to finish as well. For lighter applications and finishing well on softer metals, foam is a great choice there!
It depends on what sort of condition they are in and if it’s an old school softer alloy, but if it is and they aren’t too bad, you may like the polishers here that finished better like Auto Finesse and Mothers, but if the rims need a little more work or the aluminium is a bit harder then California Customs or Metallicut may be a better choice.
So the results say to buy Auto Finesse Mercury Metal Polish for Aluminum Alloy Wheels for the best shiny finish??? 8th in cutting so I will have to keep polishing. Thank You
Well turns out I CAN'T Find IT! So I went with Chemical guys Light Metal Polish so I hope that works out well! I noticed you didn't have any for the test😥
@10:40 on screen text is incorrect. Mothers should be 7th best cut & 2nd best finish, my apologies!
@@tien3497Brasso'z bloody beltin. 😂🎉
*Good **MyBest.Tools** power and rpm control.*
The fact you went back to square one to start all the testing as you weren't happy with the initial results, is a testament to why I love your videos and your unwavering attention to detail. Still my go to channel for anything car related. I liked this as something a little different too. Nice one Sandro, and hope all is going well for you in 2021. See you in the next one! (also the voice over for Mothers @10:40 is the opposite of the top left text results - this is the one I was most interested in for doing my headlights, autosol just didn't "cut it". Could you clarify which is correct please?)
Thanks man and much appreciated as always! I’ve put a pinned correction comment up, but the voice over is correct and the text is wrong!
That's the boat I'm in. I recently discovered Mother's headlight restoration ability (where Meguiar's headlight restoration failed) and it's interesting you say Autosol won't do the job that well, cause I was meaning to try that next. Do you think mother's is safe to be used on car windows and side mirrors also, cause of course, there's a difference between plastic headlights and glass. Haven't tried it yet.
Sandro, you are a rare species and as such we must do our utmost to preserve you. Your reviews are second to none in pare with Apex Detail. How can we support your channel so that you don't become extinct? Same question will go to Brian @Apex Detail. The "others" are just self-promoting themselves and mislead us into spending our hard earned money in products with dubious claims.
I loved the old Meguires NXT polish. I still have two old ones that I am still using. They smell great as well!
Autosol. I've had a tube since the 1960s and it still works like nothing else.
No where near as good anymore was a thick paste now watering thin liquid
Just get a grinder, yellow airway with any brown tripoli compound, white airway with any white/blue/purple finishing compound. Will get you a mirror finish on all metal types. 😉
R&J Metal Polish, that's made in a shed/shop, in the woods east of Ona Beach, which is 8 miles South of Newport,OR. It's an old Harley builders recipe that was purchased by a Father & Son (my former In-Laws). It's the absolute best metal polish that I've ever seen and/or used!
It’s great to see smaller family businesses putting out some great products!
Just now seeing this post. So awesome that you provided that personal information.
Been following your videos and your rich content. Disappointing that the tried and tested collinite failed to deliver always had high expectations of that brand. Thanks once again for this awesome review. Cheers.
Thanks mate, and Collinite is one of the best names in car waxes, and their metal wax did okay in some of my prior testing and panels leading up to this video, but as a whole and by comparison to the others, it could definitely be a little better.
Came back to add that I’ve used 3D One with a DA, soft foam pad, and high speed to polish delicate plated surfaces. I think as long as your surface isn’t really dealing with the elements for long (think musical instruments), go for a traditional wax that applies well and adds the gloss you like (Meguiars Deep Crystal is a good example). Two coats should suffice for a while.
Can’t forget though about Finish Kare 1000P Hi-Temp Wax. Not the shiniest, but this stuff cures very hard and does what it says for pennies on the dollar.
This remains a great video that serves as an example of for other testers and reviewers to follow.
Great advice mate! Oxidation due to UV light is metals most common defect and a nice wax/sealant can certainly help protect and enhance its finish.
i use to clean my Big Truck Bud Wheels with Autosol, and i really like it! a little goes a long way! great for oxydized metals too! Great Video !
Hi sandro another great un bias I glad you had autosol in as I used it do the chrome when I was renovated a original 1970s Raleigh Chopper
Thanks mate, and Autosol is definitely a nice overall polish and fantastic value!
Mate, thank you - this is a brilliant comparison video! Your insight, experience and detail on using these for various metals and the way you separated cutting vs finishing is extremely helpful!
Definitely the only video I needed to watch tonight and you've saved me heaps of time wondering what to buy.
A massive thumbs up and thanks once again! ...now to get this rocker cover reflecting like a mirror...
As a metal worker I say kudos for using all different types of metal as you understand the massive differences 👌🏽
Some polishes aren't even recommended for Chrome Plating.
Some worse for wear metals will need a proper compound with a calico buff. But these are great for up keep of a machine polished finish. And chromes.
Once I found the Meguiars NXT I kept it in my toolbox for the combination of finish & protection/weatherability it leaves behind. Shame i can't find it readily avail. Anymore.
With the Mothers I found a more brilliant finish with the Mothers Billet Polish.
And Autosol now has a larger range of products readily available for specific Metals from Aluminium to Gold etc. Which I find a much better finish than the OG autosol.
Just my 2 cents.
Once again, thanks again for yet another Unmatched review Sandro! Truly my go to channel for anything detailing.
Thanks so much for sharing your insights here as metal worker, really appreciate the comment!
This is the exact video I was looking for- subscribed.
Got a bottle of Mettalicut in the garage that I haven't opened yet. Maybe this is a sign that I need to go polish my STi's exhaust tips and throw some Dlux on afterward.
Dlux?
@@EvansWS6 it’s a CarPro coating for wheels and plastic. It’s more temperature resistant than other ceramic coatings
Nice work. Thank you.
Great work as ever Sandro, thank you, it is really appreciated!
Hey Sandro! Nice video of some of the many polishes out there. I have the Purple on my shelf as my go to polish and believed before watching your video that it would rank amongst the the 3 if not first! I did do a little research on Carpro New polish and my thoughts initially was that it seemed pretty good...maybe even better then Purple. So I’m stoked about your final results and opinion on the two. Thanks again for taking the time and many hours to bring us these results. Good day mate! 👋🏾
Your suspicions were pretty good lol!
Waaaaoooo , Just big wao, the effort you put in here is just amazing.
I recently purchased a Meguiars NXT metal polish, I actually like it really much over Autosol . But having said that, all I need to polish is the exhaust tip trim on my Megane RS265
Yes I like the NXT better as well, and yes it’s also sad that metal tips are just about the only thing most car owners have to metal polish these days!
I use metal polish around the house too. I do all the chrome taps and handles in my bathroom to keep them looking beautiful.
My tow ball on my work ute gets a periodical hit too.
Well done mate. I always watch all your videos too the end as I know how much time is going into each one. Keep up the great work. 👍
Awesome and informative video as usual!!!! Great work Sandro keep it up :) 🇦🇺🤙🏼
I have a 67 Chevelle loaded with chrome, so this video was very helpful. I’ve been using Surf City Garage Killer Chrome for several years. It doesn’t have a lot of defect removal capabilities, but it does finish down extremely well. I am one that really doesn’t require a product for removing heavy oxidation and scratches, so Killer Chrome is a great product to suit my needs. Great video!
Thanks mate, and that’s really what matters most in the end - that you’re getting the results you’re after!
Thank you so much for the advice and honest feedback
Thanks heaps Sandro, I own my own Motorcycle detailing business here is Townsville, the majority of my customers are Harley owners so I see alot of metal and chrome polishing.
I typically use 4 things when cleaning and polishing chrome and alloy on a Harley - 0000 Steal wool for chrome, Carpro Metallic Cut for my first initial clean/polish on alloy and then Mother's Mag&Aluminium polish over the top to add that pop.
And then usually a coat of wax or I found Carpro Reload layered on a couple times also makes chrome pop really well as a sealant after the entire process.
Going to try NV Lustre on this current bike I am detailing & correcting some alloy parts on.
Cheers mate - love your channel and is my go to CZcams channel anything detailing!
I wonder how the Bowden's metal polish would stack up?
Top review as always Sandro. Thanks for your efforts.
Nice work as per usual Sandro. Thanks!
Would have loved to have seen flitz polish thrown in with those
Thanks for this truly great review video. Helped me pick the polish I’m going to go with.👍🏼
Meguiar's NXT which you mentioned but did not test, is the best I've ever used on nickel plating on musical instruments. I might add the jar is of a quality level to keep it fresh and moist in the jar for years. I do think the type of metal may vary the results. I may try Auto Finesse based on your results, best finish on this medium soft metal is what I'm after. Thanks.
Great video as always
Another amazing comparison and as usual done exactly when it is needed))) Thanks Sandro!
Very good video! Autosol will forever be my favourite for sentimental reasons. My grandfather used it for everything except toothpaste, I hope, haha! Cheers!
Very Professional Test
Great video many thanks for doing the hard work in testing and research beacuse I can't be bothered..!
But of course want to be informed enough to make the choice , great job I'm very grateful..
Regards.
Great review, Sandro.👍 I have been using Autosol for years. The only parts of my car that I use metal polish on, are the exhaust and rear diff. I use Autosol first and then finish off with Meguiar's NXT metal polish.
My go to combination for years!
Mine too! Autosol to help cut. NXT for a finish and weatherability
Great video, first real metal cleanup review I see. I’ve used the first one and it did a great job but I’ve seen better. I did try something on my side, I have used the ceramic stove/cooker paste cleaner and it did a really good job !
Thankyou. I enjoyed that.
One point is cost too. I just bought Mothers ~142ml for $10 at the local big auto chain store. Autosol was $20 for only 75ml - so twice the qty for half the price makes the Mothers 25% of the cost here (Canada) - is the mothers going to be 4x the elbow grease...im doubting it. Haven't tried it yet but i'll be using it on old motorcycle wheels steel spokes, chrome rim and another aluminum rim so we'll see how it goes!
U giving me the time to skip too got my like and I'm going to subscribe.
Surprised there was no Bowdens Own
Why
@@user-jk7yz3xs8z it's an Australian made metal polish and can be bought locally. If Mother's is included, why not Bowden's?
@carcraft a really good under the radar Metal Polish which is my favorite is Flitz Metal Polish. It works on anything that is chromed also.
Any tip on how to polish and remove oxidation from chrome painted plastic trim?
Thanks for another great video!
Still a lot of classic car owners out here!
I am a classic car owner and just screwed one of my wheels up of it's shine! Do you by ANY CHANCE! Have Mothers Billet metal polish???
I saw one of your old videos when you used paint polish on metal, cause it works well.
Would be cool to try
You should have a look into FERRO'S liquid reflection. i have been using for about 10 years now its its still hands down best metal polish i have ever used
Best chrome polish was Brite Shine cotton wadding made in Australia seems to have disappeared was around for decades
I use Gumption paste if I need to cut anything back. $3 from most supermarkets.
Car Polish to finish as i figure it gives some (limited) protection
Thank you very much!
Thank you!
Simply brilliant (damn puns!) video. Any insights from anyone on using these products on musical instruments? Mellophones aren’t cheap (even rented/used ones that deserve a polishing) so I’d prefer to hear from anyone with experience applying polishes to brass or plated brass.
First off love all your videos, secondly upload the 4hrs version I want to see, i have watched more than 4hrs of your videos in one afternoon before. I put my vote for longer videos, to see the reality of what you had to do to get the results in real time would be great for me anyway, keep up the good work mate👍
I appreciate that mate and maybe in the future once I have more 4K footage storage space and a beefier computer I’ll try and put up more behinds the scenes and extra footage for those that might like to see that!
@@CarCraftAutoDetailing ill be waiting 🤣
Excellent video mate, autosol also comes in a liquid bottle form, paste is the better in my opinion though.
Try Flitz Metal Polish with their Buff Ball!
Great vid
Thanks for doing this as I’m currently working on a microlight aircraft which the unpainted aluminium has certainly tarnished. I was going to use Metall, a aviation type of polish, but already found it is very aggressive and oxidises quickly after completion. Now I have a choice! Thanks.
Great to hear that I hope it helps you find the right one.
Nice job .
Sandro! You do outdo yourself each time. A quick question, what is your opinion on Nv Glass Coating vs Nv Glass Lite coating. I would love for you to help me out here as I dont have enough information to make an informed decision.
Glass Lite is really a less durable version of Nova Glass that also has some mild cleaning abilities and can be additionally used to maintain Nova Glass, thanks mate.
Thanks sandro
There's now metal polish products from Renegade products that would be nice for you to check out too. Seen some like Chicago Auto Pros doing a review and the other one I watched Miranda Detailing. They definitely would be also happy to share with you their impressions.
I’ll definitely keep it mind, thanks.
@@CarCraftAutoDetailing on the livestreams with PapaSmurf918 or Mike's Auto Detailing your name has come because we all admire your work and knowledge. We definitely would love to have you on any of them.👍👌
I use GLANOL Metal polish! It works perfectly!!
Great review
What about the colored buffing compounds, like the green chromium, rogue, or blue? How would they compare to those pastes in terms of cut, finish, and on different materials? Also, what would car polishes do to metal; can they even cut or finish at all?
I unfortunately don’t have any experience with those coloured compounds, but you can certainly use paint compounds on metal as well - I’ve discussed and shown that it some past videos - they can work well, it just all depends
Graet video! I would love to see our polish against the ones listed =)
Can you post all the rankings in the description? Its hard to keep track just by watching. Im looking for the best polish to use before gold plating.
Thoughts on Eagle:1? I guess results would be similar but it's what I've used for a decade.
I’m sorry mate, but I just don’t have any experience with it
I’ve been using zephyr Pro40 kit, And there is not one metal polish with the buffing pad that will come close to this one
You should do a video on leather conditioners. I've been trying to find the best for the price that's not greesy and right now its either color lock or dr.beesleys
what car are you using it on that has real leather?
@@NicholasCox85 I detail on the side. I have a couple customers with leather seats.
@@Stick.Shift.Captures 303
I bought callinite wax because it was the only one that leaves wax on the finish.
Super informative video Sandro! What do you mean by ‘finish’? Is it ease of use or gloss? Would a gloss metre (before and after) have helped quantify? Keep up the great work.
Thanks and it’s the brilliance of the metal I’m referring to
Great video! I am working on my Father’s motorcycle than he left to me when he passed. I was curious on what hand polisher you are using in this video. Also what buffing pads do you recommend for polishing motorcycle chrome? Truly appreciate the feedback. Cheers!
Thanks mate and I think that’s a beautiful thing to work on and restore your dad’s motorcycle.
I’ll give you a link to the polisher I used in the video and as far as pads go have a look at Microfibre pads if the chrome needs a bit more attention in removing oxidation and light swirls, while foam pads can be great if the chrome just needs a lighter polish to clean it up.
The polisher fits any 3” size Velcro pads and there load of different ones around, so just go fit whatever fits your budget.
www.waxit.com.au/collections/shine-mate/products/shine-mate-ex-603-12mm
I have a motorcycle with an aluminium and steel frame, the aluminium part has gained little black spots, the bike is 23 years old
Every person i ask tells me that its there to stay.
My question is, will a product like autosol be able to remove them?
Thanks
Typically those corrosive spots on older aluminium are really fused to the metal so that a polish won’t be able to remove them. What can work is quite a more involved process in sanding back the aluminium with coarser grades of sand paper, to medium and then finer grades and then using heavy compounds to medium and finally your metal polish. Basically it’s a lengthy metal restoration required.
You need to try chemical guys metal polish and also zephyers metal polish
Zephyr Pro-40 Perfection Metal Polish 👌
Where can I buy auto finesse in australia? No stores I search up have it
Unfortunately the brand didn’t seem to go well here locally so I don’t think anyone is importing it at present.
Hi Sandro - great video as always. Just wondering how does something like metallicut compare to a paintwork cutting compound in terms of it's ability to remove defects. Something like Scholl S2/S20? I have scratches to remove from tailpipes and saw from another of your videos (a while ago) that you recommended traditional compounds in their place - or have the advances in metal polishes from CarPro etc made it a closer one to call now?
Thanks and yes it would be interesting to test that out, but my gut feeling is that a coarse paint compound will tend to cut more in relation to swirls or scratches but it probably won’t finish as well as most metal polishes. Scratches can be quite difficult to remove from most metals, and equally difficult to refine compounding swirls so you may be in for quite a bit of work!
Purple
Thanks for this video, but finaly, wich produce the best shine mirror for aluminium?
Right now i am having a problem with my catholic rosary which is used to be gunmetal colour, but now it became silverish colour because of the gunmetal colour been worn off.. so i would like to know which one should i use to repolish back gunmetal colour?
It sounds as though the gunmetal was a plated metal over the steel that has worn off, so I’m not sure a metal polish would help you out here.
All I ever used was autosol back when in the army on my chrome parts, but I wish I knew what I know now, I'd be busting out the rupes nano to sand and polish 😂
Lol, yes, a little machine action can definitely speed things up!
Could you post the polish tool that you used too? Thanks!
Excellent video mate. I've been using the Purple Polish for a number of years now and found it to be the easiest to use with the best shine on truck wheels. Until now I've been polishing by hand using a non-scratch scouring pad however I would like to make life easier and do it by machine. Any idea what machine and pad might be suitable for Alcoa alloy wheels? I've tried the Mothers Powerball however its just not durable enough.
If the wheels aren’t too intricate in design, a mini 3 DA such as the shine mate ex603 could work well, but if the rims are more complex on design you’ll need to drop down to a 2” or 1” polisher like the Rupes iBrid or Flex PXE 80 - which are quite expensive. If you have access to a good air compressor, the Rupes TA50 is a more affordable and brilliant mini polisher for wheels.
The Shine mate microfibre pads are a great affordable option, and the lake county fibre cutting pads are even better but more expensive.
I like that swirl finder, what brand is it and is the cost reasonable??
Here’s a link
www.waxit.com.au/collections/takenow/products/take-now-flycolour-handheld
Hey Sandro, great video! Just one question, where did you buy QuickGlo from in Australia? There seems to be no supplier here in Oz... :(
Also can you use quickglo to cut then autofinesse to finish? Thanks once again for awesome videos!
Thanks and I got it from eBay - just search for it and I believe there’s a few options still shipping to Australian! I’d firstly do a quick test section because certain metals are more difficult to refine but that could certainly work.
@@CarCraftAutoDetailing awesome man thanks heaps. I love watching your videos. Big fan for a couple years now :)
Great comparison video thank you. Random question for you. Do you think the Mother's Mag and Aluminium would work for uncoated aluminium window frames which are quite oxidised? About 40 years old and looking very worse for wear. Thanks
Thanks and yes, it should work well on bare aluminium trims, it may require quite a bit of elbow grease to cut through that heavy oxidation but you should in any case see a great improvement.
Legend 👌
Can any of these products remove scratches from brushed aluminium engine covers?
They can certainly remove very light swirls but any thing more substantial will tend to require sanding and compounding before hand.
No FLITZ in Australia?
I’m not sure, but it’s perhaps not quite as well known here.
Sandro! Should I coat my car with NV Nova Evo or U.K 3.0?? What would you do?
It depends... lol
Evo is one of the best single layer coatings on the market, not cheap but fairly easy and forgiving to work with and as a single layer coating it’s very tough to beat.
CQUK is amazingly value and if you don’t mind laying down 2-3 coats it looks and performs great if you’re willing to get the larger bottle and take the time to layer it.
I’ve had both of them on my cars and been super with the results.
UK3.0 + Sic is something I want to try next and see how it goes!
Hi Sandro. Which pad do recommend to use for cutting and polishing chrome surfaces?
Microfibre is probably the best for cutting as it’s very effective yet still finishes very well. Wool can also cut great but won’t tend to finish as well.
For lighter applications and finishing well on softer metals, foam is a great choice there!
@@CarCraftAutoDetailing Thanks Sandro
Hello, which one will I use in knives with more pasari?
Mothers all the way!
Powerful Beast
Zephyr pro 40
wich one is the best betwin all the polishes for the wheels aluminium
It depends on what sort of condition they are in and if it’s an old school softer alloy, but if it is and they aren’t too bad, you may like the polishers here that finished better like Auto Finesse and Mothers, but if the rims need a little more work or the aluminium is a bit harder then California Customs or Metallicut may be a better choice.
Hi, where can I get Quick Glo in Australia? I can’t find it for $20.
It’s been a while since I bought it, but I got it on eBay - just searched for Quick Glo
So the results say to buy Auto Finesse Mercury Metal Polish for Aluminum Alloy Wheels for the best shiny finish??? 8th in cutting so I will have to keep polishing. Thank You
Well turns out I CAN'T Find IT! So I went with Chemical guys Light Metal Polish so I hope that works out well! I noticed you didn't have any for the test😥
Update NOTHING BEATS Mothers Billet metal polish😡😱😫
Have you ever tried Zephyrs?
No I haven’t
1st from Puerto Rico 👍🇵🇷
🥇