How To Charge Refrigerator with R600A Freon/Refrigerant
Vložit
- čas přidán 30. 10. 2022
- In this video, I have charged r600a Refrigerant/ Gas in a refrigerator, and I have fixed the leak in this fridge as well, which will be very helpful for you to braze the pipe when you charge the r600a system.
******************************************************************************
Products You Might Be Interested in buying and sharing with your friends. Thanks!
Multimeters
NEOTECK Digital Multimeter ➡️ s.click.aliexpress.com/e/_Dml...
ANENG Q1 Digital Multimeter ➡️ s.click.aliexpress.com/e/_DeU...
Digital Pen Multimeter ➡️s.click.aliexpress.com/e/_DkM...
Rechargeable Smart Multimeter ➡️s.click.aliexpress.com/e/_DDm...
UNI-T UT181A True RMS Auto Range Multimeter ➡️ s.click.aliexpress.com/e/_DFL...
ANENG 616 Large Screen Digital Multimeter ➡️ s.click.aliexpress.com/e/_Dln...
TOOLTOP ET8135 True RMS Multimeter ➡️s.click.aliexpress.com/e/_DB8...
MASTECH MS8910 Digital Multimeter ➡️ s.click.aliexpress.com/e/_Ded...
ZOYI ZT-X Digital Multimeter ➡️ s.click.aliexpress.com/e/_Dd9...
ANENG Q1 Digital Multimeter 9999 Analog Tester ➡️ s.click.aliexpress.com/e/_DEz...
Thermal Camera
UNI-T UTI260B HD 256X192 Thermal Camera ➡️ s.click.aliexpress.com/e/_Deo...
TOOLTOP ET692Cl Thermal Imaging Camera ➡️ s.click.aliexpress.com/e/_Dm0...
Mileseey TR120E Infrared Thermal Imager ➡️ s.click.aliexpress.com/e/_Dej...
Fluke TiS55+ Thermal Camera 9HZ ➡️ s.click.aliexpress.com/e/_DCO...
Noyafa NF 522 523 Handheld Infrared Thermal ➡️ s.click.aliexpress.com/e/_DCe...
TOOLTOP T7 256*192 Android Thermal Imager ➡️ s.click.aliexpress.com/e/_DmB...
Soldering Wires
10Pcs 2mm XZZ-2015 Desoldering ➡️ s.click.aliexpress.com/e/_Dkg...
0.8mm/1.0mm 50g Lead-Free Solder➡️ s.click.aliexpress.com/e/_DDn...
0.6/0.8mm 50g/100g Lead Free Solder➡️ s.click.aliexpress.com/e/_DDC...
200g 500g Tin Wire Soldering Wire ➡️ s.click.aliexpress.com/e/_DdQ...
8g 50g Per Roll High Purity Soldering Wire➡️ s.click.aliexpress.com/e/_DCm...
250m/roll 30AWG UL1423 Insulation Cable Copper➡️ s.click.aliexpress.com/e/_Deu...
Vacuum Pump
18V Lithium Battery Vacuum Pump ➡️ s.click.aliexpress.com/e/_DDK...
VEVOR 2.5CFM Refrigerant Vacuum Pump ➡️ s.click.aliexpress.com/e/_DkT...
Refrigerant Vacuum Pump ➡️ s.click.aliexpress.com/e/_DkH...
VEVOR 1.8-4.8CFM Refrigerant Vacuum Pump➡️ s.click.aliexpress.com/e/_DeA...
Mani Fold Gauge
Digital Manifolds Refrigerant Gauge ➡️ s.click.aliexpress.com/e/_DC3...
R410A R22 R134a R404A Manifold Gauge ➡️ s.click.aliexpress.com/e/_DeB...
Refrigerant pressure gauge ➡️ s.click.aliexpress.com/e/_Ddg...
500/800PSI Refrigerant Manometer ➡️ s.click.aliexpress.com/e/_Dne...
HONGSEN HS-330 Refrigeration Vacuum ➡️ s.click.aliexpress.com/e/_DBi...
Air Condition Gauge Manifold ➡️ s.click.aliexpress.com/e/_DFu...
MRCARTOOL L202 Air Conditioner ➡️ s.click.aliexpress.com/e/_Dkg...
Soldering stations
RF4-H2 Automatic Sleep SMD ➡️ s.click.aliexpress.com/e/_DBa...
JCD 2 in 1 Soldering Station LCD Digital Display➡️ s.click.aliexpress.com/e/_DFz...
GVDA New Soldering Station ➡️s.click.aliexpress.com/e/_DDc...
JCD 8586 Soldering Station 2 In 1 Digital➡️ s.click.aliexpress.com/e/_DBX...
******************************************************************************
Subscribe to The Channel 👉 bit.ly/3vNT7s3
Social Links
Facebook 👉 / forevertech3
Instagram 👉 / forever_tech1
Twitter 👉 / forevertech3
Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for 'Fair Use'
for purposes such as criticism, comment, news reporting, teaching, scholarship, and research,
Fair use is a permitted by copyright statute that might otherwise be infringing,
Non-profit, educational or personal use tips the balance in favor of fair use
#refrigerator #refrigerant #freon #gas #fix #leak #brazing #r600a
I have been in the industry for 59 years, and would never use flammable refrigerant...
It's insane!!!!
Excellent tip about the oil. I'm not an HVAC guy and wouldn't have known to look for that. Thanks.
Thanks a lot sir....
Thank you
❤❤❤❤nice
Thanks
Terimakasih imponyah bos dalam dari Indon👍👍👍👍👍👍👍🙏🙏🙏🙏🙏
Well explained, thx.
Glad it was helpful!
Good
solid video!!!
Thanks
we leave the valves on all the units we fix. when we come back in 15 years. we can check it easy.
I’ve seen this too - but they don’t put any valves on ours - they put nuts (like what you see here). A valve would be better - kind of like the quick release ones used in airbrushes - so that there’s no loss of refrigerant. Yet the people that did mine still screw the nut on and off as though nothing will get lost. SMDH.
Backyard technicians 😂
“We leave the valves on” 😂😂
The joke is on you. The Appliance will never last more than five years in normal operation. It’s by design from the engineers. 😑😑😑😑
Thanks very useful 😊
The valve remains on the compressor and is not soldered off. The pipes are laid neatly and pipes that are too long are cut off. The capillary tube is laid to the side and the tube is straightened
Can you leave service valves on legally ? I’d be worried brazing ends, relying on a crimp to stop me blowing up haha. Only take a tiny leak to ignite. Thanks for video
Thanks alot sir
Most welcome
Where can I purchase the instrument panel which was used to plug in the refrigerator?
I met a similar case lukewarm yours, leaking rusty pipe. I did the procedure like you did and the compressor failed. What could I have done wrong?
Great Video. One question. Why did you remove the valve in the end? Isn't it ok to leave it there for a future service if needed?
It would make his work redundant because anyone with a bit of knowledge, a spare fridge compressor used as a vacuum pump, a charging hose with ends ISO 1/4" thread and a can of R600 could do a short refill for a fraction of the price.
👍
Had a Samsung double door fridge a few days a go with leak inside the condenser. Unfortunatly not fixable.
Hi is it possible to just use a piercing valve instead of cutting and brazing?
What scale do you use? Any scale i have turns off automatically after a minute
A very helpful tip is to 50ml of purified water to the compressor before regassing. This helps lubricate the oil
how about the dryer? removal and replacement of the dryer is important ! also nitrogen does not absorb moisture. Drawing a vacuum is important to remove the moisture as the liquid will evaporate, subsequent flushing with nitrogen is advicable.. Is this fridge even worth the effort?
I did the vaccum but couldn't film that. The dryer was fine, So No need of replacement, The goal of any nitrogen flushing system is to cleanse pipes and other parts that contain contaminants. And yes the effort was worth it. This refrigerator is still working fine. As it was fixed about 2 years ago.
How much is the charge of all doing this?
I'm always afraid, when I want to weld. traumatized . A few years ago until it exploded during welding. Can you provide a safe tutorial for welding with Refriger R600.
Oh dear that's sad to hear, You should always use two or even three punching tool and check the leakage with foam before welding on r600a. As I told these are the safety measure one should take, To check the leak with a soapy foam. I always check the leak before welding on r600a. To be safe from such incident.
nitrogen flow
Hi, pl let me know how can oil charge in same compressor with marked section line or other side ? how much ml oil ?
Check the compressors specification from google. The oil value will be mentioned there.
Keep #frigoristesteve
Is passing Nitrogen same as Vacuuming ?
Nitrogen is used as high pressure leakage detector as well as flushing the system.
While vacuuming is used for evacuation of moisture and air in the system
I didn't see you vacuum the system or change the drier since you expected water or moisture to have entered the system
I did it off the camera didn't show on the camera because I forgot to record that part in the video.
How much CFM vacuum pump need for small appliances
Thanks a lot but I beg to differ where you said there is a possibility of water in the system since there was a leak on the pipe in the drip tray. This may not be possible since the leak was on the high side the discharge side.
The master is right.
When you run a refrigerator with a leak on high side,it creates a vacuum in the system.
After switching off the refrigerator ,water from the tray is drawn inside the system to fill that vacuum.
That water and moisture must be evacuated using a vacuum pump before charging the system first.
@@wawerukamau1260 have you ever performed a self vacuuming process before? If you understand that process you will understand this.
@@lloydpeniyasi4699 I'm a qualified refrigeration and air-conditioning engineer ,I know what I'm talking about.
Self vacuuming is done at the end of the condenser next to the filter drier.Some attach a capillary tubing for that process .
Just put that capillary to a bottle of water while vacuuming ,switch off the compressor and you shall see the capillary sucking that water.
Just as the same action when taking your favourite drink of Coca-cola using a straw.
@@wawerukamau1260 it's ok boss we all learn everyday... thanks for that
He ment moisture guvna. ..Please allow him
A Look
if you use R600A, then you don't have to vacuum the cooling system, right?
no we need to vacuum the system
hi, is R600a refrigerant is damage the evaporator coil ?
Before charge#600freon ricreur flo that its ok
Можно было оставить клапан шредера! И все в порядке!!
Я не оставил клапан Шредера, потому что хотел, чтобы это выглядело так, как будто никто не работал над холодильником.
Filter-dryer change!!?
The filter was fine, that's why I didn't Changed it
Nitt global
ííííííiíí it's k
thats samsung
have a weak ass pipe
and selling price is high and poor customer service after sales
To much work.
Compressor is giving me 3 to 460 psig and i am putting 0 to 3 psig of r600 Freon waiting for at least 20 to 30 minutes start the fridge condenser get warm start to give cool air work an freeze but stop ofter a week or two what is going on help me please
I asked this question once I am doing step by step how you doing it and my work only last for three weeks the fridge work and stop freeze how come help me please
Please Elobrate did you replaced the compressor.
Method one for charging should not be followed. NEVER start your compressor in a vacuum! Always weigh in the charge