Masterclass Resin Printing Auto Support Test
Vložit
- čas přidán 27. 06. 2023
- I never like auto support because it always bad and not how i wanted a clean and organized support. and my friend keep bugging me to try out chituboxpro 1.4.0 auto support, at which in the end i tried it. and i have to admit i am impress by the result.
so this is my test of chituboxpro 1.4.0 auto support.
45% discount code for Chitubox Pro
Promo code: dennys
cc.chitubox.com/customer/cart...
Period: NOW - July 3rd, 2023
kindly support my channel / dennyswang
Calibration Models
cults3d.com/en/users/krisn4li...
25% discount using my code : Dewa0310
for DM Stash figure at dmstash.com
Checkout Phrozen Website for Phrozen printer
phrozen3d.com/?aff=98
If you in Indonesia, you can buy Phrozen printer at tokopedia here :
tokopedia.link/I1hQGRPRpmb
If you are in Indonesia, you can buy NFEP at tokopedia here
www.tokopedia.com/yuishimokaw...
40% discount code for Chitubox Pro
Promo code: dennys
cc.chitubox.com/customer/cart...
Period: NOW - July 3rd, 2023
* 1-month Pro license: buy 1 get 1 free ($9.99 for 2 months, only $4.85 for 1 month). Customers need to Email CHITUBOX (marketing@chitubox.com) with a valid payment receipt, CHITUBOX will provide a 30-day Pro license in 48 hours (except for all holidays).
* Yearly Subscription: 40% off
All CHITUBOX Pro users can now use their slicer on TWO devices and enjoy unlimited slicing on CHITUBOX PRO sets. So go ahead and let your imagination run wild with 3D printing!
Chapters :
#3dprinting #3dprinter #chitubox
If you interested to check my other work
Here my social media
FB : / nobodycustom
FB : / 3dmikron
IG : / dennys_wang
FB Group : / 373300934849501
Discord : / discord - Jak na to + styl
Good info; thanks Dennys!
thank you!!!
Glad you explained what that line was on the controller grip! I got one of these on my mono 2 printing a rocket pod tube system for a model the Z axis os solid thats not moved but was either this or it was the FEP it had a couple of soft lines from rafts in it and was printing the fep lines on the model's! I have changed out the new fep for a new fep it didn't last long 3 weeks and had a load of soft indent lines from rafts and it was perfectly tight and flexible enough it came straight from factory! The new FEP definitely better no more mirrored lines amd creases printing on the model surfaces!.
Wow. I feel like i've been under supporting my models. That is wild! Great work!
Dont be mistaken
My models has lots of overhangs due to the carbon fiber texture.
I first use high detection for suspended areas and medium supports. then I use very small autosupports with my own settings.
for a raft I use only bottom connected...give it a try ;)
Just got a mars 3 and just started my first print with these settings about halfway through and so far so good
Good to hear that
I have found the recent Chitubox auto supports to be very good. Even better than Lychee. They get you about 80% there. Then I just go back and add in anywhere I think needs extra. Lychee auto-supports have not improved over time and I find their slicer to be less reliable for the Phrozen printers.
Agree!
I may try Chitubox because Lychee autosupports + adding supports, even with nfep and a lot of testing never produce a complete batch for me. This had me quit 3d printing for a year now... And I have a phrozen SM4K
I always use auto support in chitubox but I do go in after and add my own supports to fill in what I feel chitubox misses.
Definitely going to tey with today with my new saturn 2 i got yesterday thanks for the great tip, im using lychee pro the new update but auto supports are still rubbish but the new pai t in support features are amazing! Its catch 22 what to go for as lycee is ment to be the only slicer with the paint in supports etc but i think the elegoo comes with a chitubox slicer on the reviews not sire if its pro or basic though?
I tried the basic
The support is not bad though.
i, thanks for the video. Are there any plans for a video on setting up supports.
Will do
Hi! The Pro version does the auto supports better than the free? And do you check for islands ?
Hmm, auto support is a great base. I think you have to try auto with heavy support base : Keep an angle under 15° may be 8° is good enough for the base. Ajust touch tip distance and middle distance as you like. Could you try once ? What do think about these parameter ? Thank's a lot for your sharing
Im actualy wathing yours video... May be the solution is there !
walaupun ada merah2 itu dari slicernya, tapi support di area depan itu boleh didelete karena angle print nya, dan jumlah supportnya ya udah kuat ya?
Bro I have been resin printing and casting for years now and the supports piss me off to thin fall off detach from support too thick too much damage to model. I can’t tell u how many times I swear it’s good then the dreaded fall off build plate but using true blue by Siriya tech . They recommend heavy supports
I do not have pro version, but found same problem, when You have generated supports You just can not change raft/support settings on the fly, because it's not working dynamically.
I experience it in my video.
Biasanya tonjolan yg terpisah kurang dr 10 layer masih bisa keangkat kalo pas yg connecting kayernya cukup lebar (misal tongolan belakang yg d atas)
Tonjolan apa beb?
@@wangdennys yg macem 1/5 lingkaran, buled buled
Hey Denny where did you get the steering wheel model from? Looks awesome.
It will be release in several days for my patrons
great Video Dennys, thanks again. Is this feature, Chitubox auto supports also available on the free version?
Free version is not as good as the pro.
Obviously lol
@@wangdennys true... so, the answer is??? no???
@@walterrldias i just test it.
Although not as good as pro.
But still better than the other slicer.
@@wangdennys I was just messing with you... but I did ask a yes or no question... hahah. I got you, NO the AI feature is not available on the free version, because it is not as good as the pro, obviously, although a very good slicer. thanks so much for the content you provide.
wow, seems pro version has more advance setting on support function. May I know there are many pit behind the opject?
What pit?
@@wangdennys support pit
How do I connect the supports as done in 1:24 and onwards? I'm unfamiliar with UV-Tools, or any other software, I'm guessing this is also done in chitubox.
That is just example using other slicer for comparison.
It is on lychee
Oh I see, I will have to start looking into it, seems like a very useful technique. Your videos have been tremendously helpful, keep up the good work!
@@ZlDarkAngel6 thank you
how do you do the multiple contact point in your support?
stay tune for my support videos
do you always use the raft? What's the benefit against not using it?
I think i have explain in the video why i use raft or not.
hi Dennys, may i know is this model printed solid or hollow?
Hollow
@@wangdennys thanks. Is there anything i need to pay attention to, if i were to print a similar model hollow?
What was the % of supports? Support quantity %?
I didnt touch the %
What would be the density percentage?
I dont change it.
It is at default