CHEAP FPV UNDER $100
Vložit
- čas přidán 7. 08. 2024
- Do you want to fly a drone with goggles like a Drone Racing League pilot? If you are starting off with nothing I will show you everything necessary to start flying FPV and it is only going to cost $100. For someone who is first starting out it may be confusing to select components and get them all working together. I have made this video to help you become an expert tiny whoop pilot. There are a lot of different versions of the popular Tiny Whoop and this is a variation using the cheapest components that will still give you a great experience. I show you how to mount the FPV camera on the tiny drone and how to get transmitted signal to the goggles so you can see where your flying.
Flight Weight Stock:
21.7 grams
Flight weight with FPV:
26.5 grams
Anything over 27 grams total and the little quadcopter is hard to keep hovering in the air without bouncing off the ground. If you can find lighter components then they will work better. Remember the lighter the final weight is the better it will fly.
MAIN COMPONENTS:
Quadcopter
Video Camera and Transmitter
Goggles
Batteries
LINKS~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Eachine E010 Mini: bit.ly/2hq4na7
(UPDATED) Eachine FPV Goggles: bit.ly/2wMpTN9
My Fatshark Googles: amzn.to/2xy7i62
TX01 FPV Camera: bit.ly/2wMNFso
TX02 FPV Camera: bit.ly/2vKhN5H
(UPDATED) Smallest/Lightest FPV Camera:
bit.ly/2jVDVWG
amzn.to/2wMV8Yd
Battery USB Charger Set: bit.ly/2xsCQc3
(OPTIONAL for Taranis) Multiprotocol TX Module: bit.ly/2jW7305
MUSIC~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Lensko - Circles
Tobu - Roots
Jupe - Hurry
Dj Quads - Always - Věda a technologie
I built this tonight and it totally worked, I had never soldered anything in my life and I got it to work. However, I recommend the eachine VR006 for anyone looking to build their first FPV whoop. I also recommend the smaller camera linked in the description above. Thanks man, great tutorial for people looking to build a cheap whoop. This thing is tons of fun! I’m going to build another one as a backup lol.
Also wanted to add that I used the smaller camera mounted with a rubber band and kept the plastic canopy off and it doesn’t feel sluggish at all, it zips around pretty quick. I’m getting 3+ minutes flight time easily, probably closer to 4 minutes. The recommended extra batteries also work like a charm.
great video, no bs, just the information I needed, cheers from green rainy England.
This video was very helpful and I can now get into FPV. liked, subscribed, and turned on notifications.
I have watched so many videos based on this subject and this is the only one which actually makes sense
Thanks a lot for spreading the hobby!
Great video to!
Dont care if youre sponsored! I love this video and I love you (no homo)! Thank you for giving me the opportunity to start cheep!! Thank you so much bro. You just got another sub😉
+Istianco ! Lol thanks, I'm glad to hear the video was helpful. That is one of my main goals is to help people learn how to create awesome stuff!
do did you end up doing it did it work?
Gay
Great video, I'll pass this on to my friends interested in getting into FPV.
+Rick in Jax Thanks Rick! I hope it's helpful and encourages people to get into FPV!
+NeatherBot, it shows in your description that there is a TX module, what does that do and do you need it to fly the drone?
+Thomas Lenaerts Hey Thomas, great question. The TX module is a Transmitter. Tx = transmitter & Rx = receiver. The controller (or transmitter) that comes with the quad works fine, but if you have a FRSky Taranis and want to control the tiny quad you can buy that TX I listed and pop it in the expansion plug in the back and control it. It is optional, you don't need it to fly this little quad.
NeatherBot thank you
I love your editing and convenience of the information. You earned a sub
+JakevandeeThanks for the support!
Best video in its class. Great work . Keep the vids coming.
+Otilio Orabona thank you!
thanks so much I have been wanting a indoor fpv drone that is cheap you are awesome
Nice! The E010 was my first foray into FPV as well. You might want to update your recommendations now however, I moved on to the E011 and find it performs much better with the 7mm motors, where everything else is basically the same. Return to home=kamikaze mode ;)
This video is best no question 4 u u r perfect youtuber great video u included as small thing as u can nice job buddy
+Lewies Gohain Thank you! I really appreciate your comment :) happy flying!
This was really helpful!! thanks !
this video helped me to order my first fpv drone and goggles i ordered
Eachine E010 Mini
TX02 FPV Camera
Eachine VR006
They were 64€ in total with shipping
Amazing video! I loved it! I have same quad but its named JJRC H36 and im wondering if i can connect camera and everything like you did too? BTW AMAZING video...I'm interested in getting into FPV :-) U gave me motivation !
Great video and good explanation !
Hey man! Really impressed with your channel videos!! Congratulations! I'm going to "copy" your product for my spanish drone channel, to show how can people start into the fpv world for just a little money. Thanks and keep going 💪🏻
+deDrones hey I'm glad I helped. Hit me up with the link when you publish I want to check it out. Cheers!
NeatherBot perfect man!! Thanks
Built this with my 7 year old daughter she loves playing with it!!! Awesome tutorial thanks!!!!
Very informative. Can't wait to get up and running !
+Dave Hansen right on! Glad the video helped
awesome video! Will be trying this
Great video.
This is a great video. I've been in this hobby for a long, long time and flown just about everything, but some of the most fun I've had has been will little projects and experiments like this. One tip, invest in the appropriate soldering iron for this type work. That 25W job from harbor freight is not a good choice :). You want something with a tiny tip and controllable heat range. Plenty around cheap.
Great video thanks for the info! How long is the run time with fpv and what is the distance range?
this is useful for me, thank you very much, may all the best for you :)
Thank you for the kind comment. I am glad the video was helpful!
Great video, awesome step by step tutorial.
+Oscar Elenes thanks, I'm glad you found it helpful!
By the way great video, learned a lot. Didn't know it was calibrating the acc when binding :D.
Great tutorial, thanks!
DUDE that's awesome!!! I'm definitely gonna do this!!! Thanks for the inspiration!!!
+M Dijkstra I'm glad to hear that you were motivated to do this! Good luck, let me know your success!
well i tried it but it's so heavy it can't even get off the ground.
any idea as to what i did wrong?
Great job explaining, well done 👍🏼
+RC944jim thanks!
Absolutely brilliant
Thx for this tip i bought all the stuff you said!! I only need to atatch the cables and wait for the Fpv Googles to come!
+Watcher YT oh man you are going to be pumped to start flying FPV!
Gostei do vídeo. Muito bem explicado. Parabéns pelo canal.!
nice vid man!! btw what's the range of this mini quad?? and the range of fpv transmission? subscribed!!
wow...I didn't know such things existed. Thanks for enlightening folks like me
you made me very happy. I can totally do this. :D
nice video and setup at your place
Love you work bench area :)
+KennyLee NYC Thanks! I still want to change it up a bit, but it works well!
Hey dude, Mind if I come by and hang for a bit? Use the Printer, Or game on that monitor that goes on for days! Sweet set up! And great intro to FPV Video. Liked and Subscribed
+Dante3025 Come on over!
Good Video!! God Bless!! :D
Mate! K-Wuality video dude! To the point! (Scotty UK)
What was the battery upgrade? i have a JJRC on order does the same apply here ? thanks great vid
Great video do any of the cheaper goggles have adjustable optics?
Hey there Can you please update This vídeo? Fpv on budget After 4 years?thanks!
Really enjoyed to see this
i like your video bro.. haha i feel soooo good..
I was the 1000 like :p amazing video btw as always
+Robert Seecharran wohoo! Thanks for liking my videos :)
Very good video
+Robert Gardiner thank you!
the eachine e013 is the same but with vr006s and no assembly but its much cheaper. I would heavily recommend that instead because it requires no assembly and is super easy to use.
Amazing video! Great job.. But, will any fpv goggles work? Because the link is not working for the goggles in the desc.
Great video I done a similar build but I used the e011 and an eachine rotg01 the entire build cost close to £60
Could I use similar setup to flying my DJI Mavic Pro? DJI goggles are expensive as hell while the video feed via WiFi has a lot of latency. Can TX02 be connected to it's own battery? I don't want to mess with modifying my Mavic. PS thanks for a great video!
Two soldering joins are for power the camera only . Right ? I want to try my RC car's LED light outlet to power up the FPV camera. can I do that ?
hi I put a 5.8ghtz,on an F36 micro drone ,it works fine until I go to fly I get really bad screen noise I soldered it as u described but no good ,also the camera gets hot ,please help ,thanks
New sub Thx for the vid man
+486films wohoo! Thanks for the sub, I'm glad you liked the video!
I enjoyed this video.will these googles work with all fpv copters.I have a jxd 510g quadcopter
+Larry Knight it will work with any FPV transmitter that uses the 5.8 ghz frequency. Some fpv uses wifi and that is not compatible, but it looks like the jxd 510d uses 5.8 so you should be ok.
more vids like this, new sub
Hi
I have that tiny drone to chase the kids at home. I will add an camera but i wonder if i can use my other gear i have.
Is it possible to use my DJI fpv googles v2 wit some av in receiver for the camera? Can you recomend me on?
Is it possible to use my radiomaster boxer 1w elrs as a remote?
I think the best mini quad in this price range is the eachine E061H. I reached 10 minutes with one battery, this could be a nice platform for FPV ?
nicely done..
+Al Hodge Thank you sir!
Can someone please help me and say how i can bind my devo 7 with this, is there any instructions for that? I hate that transmitter but its only what i got, maybe going to buy new one soon..
Ya think it would cart a camera and two of the 150mA batteries ? Thinking of paralleling the 150mA cells.
What is the multiprotocol TX Module used for? Never saw you use it in the video....Do I need one for the drone?
it is possible to replace the original plug in that camera for another?
answer pls
How can you recept video if you have linear antena on googles and on drone cirkular?? Is that possible?
I am just getting into the hobby and love the looks of this little quad, but I need to fly outside. Can this quad be flown outside or is it only good for indoor flying?
It flies best when there is no air current. Inside is the best environment, but if the wind outside is completely still you can fly no problem. Just be aware that if you get it up above trees and wind does start blowing this little quad will not have enough power to fly back against any wind. Cheers!
Just wondering. Is it possible to get this to send video to a mobile device to save those $40 you spent on the goggles? And then maybe even use google cardboard? And if that would work, what should be needed done?
Can you put a session ontop?? Or do you know a cheap one I can stick one onto?
Nice vid for fpv beginners, but I as someone who has gone the same route, I have to disagree with two major choices. The VR007 aren't that much cheaper than the Hobby King Quannum Cyclops ($39), which has almost double the resolution, a brighter screen, and a more sensitive VRX. Having a clearer image is important for avoiding little branches and a more accurate immersive experience.
While a cheap knockoff inductrix sounds great, a lot of those E010's don't have strong enough motors to lift an AIO cam. The Eachine H8, or Syma X11 are in the same price range and offer far more lift capacity, endurance, and enough power to fly outdoors in light winds.
+Phrancis5 as this video gets older new products come out that will most certainly be better. I agree with your comments. Those would be a better buy than what I have listed. And in 4 months there will be even better stuff to buy. This hobby is always changing and thankfully always getting better!
Yes I totally understand that products and prices improve quickly, but I'm talking about components that are equal to (Quannum Cyclops) or years older (Syma X11, Eachine H8).
Can you recomend me some cheap micro outdoor drone that has acro mode? Ty verry much
Phrancis5 you know of any $30 Mini that can use FPV and use your regular controller not these toy ones?
Im abit late in this One but is this options still good?thanks!
is that a carbon fiber table? I WANT A CARBON FIBER TABLE
I think its a skin
Snafu I was thinking the same thing
I think so
I was looking at getting this set fpv goggles you used in this video or the Quanum Cyclops goggles hobbyking.com/en_us/quanum-cyclops-fpv-goggles.html from what I saw the cyclops had a better screen is that worth it and which one would be better in your opinion?
Is it still 8 minutes flyntime? I thought of this rig when I saw that drone on CZcams then I seen this vid.
Quick question instead of saunter can you glue with hotglue?
What would be a link to those 45c batteries you talked about? I can't find them anywhere.
I got a e010 months back but can't figure out what cam I put on it the 01 or 02 lol
Is there one around the same price that can connect to a regular non toy controller?
I'm planing to make one. Thebquestion is. Can I use either 3.7v 400mAh and 3.7v 1200mAh? Battries?
I’ve done this on a drone and the drone flys up and then not even a minute later goes. Back down and blinks for low battery.do I need a better quality drone ?
Did you add solder to the solder pads or did you tin the wires?
hey, on the TX02 do you have to cut the little plastic thing off the bottom in order to saughter it together with the drone? thanks :)
+Forest Cuts the plastic plug on the end of the black and red wires does get cut off to directly solder it onto the board yes. But you can get Y adapters so you just plug everything in.
you can get e10 with fpv instaled for 34 euros from banggood and for lipo get the one of the chargers banggood has to charge 5 seperate
can u recommend a better quality camera at around the same weight
What colour is what is red positive and black is negative?
Fantastic video! I'm VERY new to FPV. I'm debating between the E013 kit (drone + goggles + transmitter) or build like NeatherBot suggests here. My question: Will I get better video (quality and range) going with this configuration vs. the E013 kit?
+Rob Ludlow I have flown the E013 and I am blown away that you can get everything for such a low price. BUT the goggles in the E013 are small, not so small you can not use them, but they are significantly smaller than the other goggles I use in this video. So my suggestion: if you are wanting to get into FPV just for a taste of what it's like with no soldering and not fuss the E013 will give you an FPV experience. If you think you will be getting into FPV for the long haul, I would suggest something a bit more expensive so you get higher quality parts. It depends on what you are trying to get out of it.
NeatherBot, brilliant, thanks! I'm following your lead and getting the nicer goggles, a few of these tiny drones, and a couple different cameras to test out. I'm going to blame my new addiction on you! ;)
+Rob Ludlow I am happy to take all the blame for getting someone new into this great hobby!
You can buy the pigtails with connectors on eBay for under $2 per 20.
No need to cut the connector off, and you can move the camera to other drones.
Search eBay for: 20pcs Micro JST 1.25mm GH PH 2-Pin Male & Female Connectors w/ Wires
you should also buy the stick extensions for the controller. is about 2usd on banggood
I don't have any way to sauter the camera to the drone, any other way? Would hot glue work
What is the different between the 2 camera's in the link?
Could you tell me what kind of 3D printer that you have. I am thinking about getting one. Don't know much about them. Thanks. Robert
+Robert Glazier Sure thing Robert, I have an Ultimate Original. If you go back through my youtube videos you can find the time lapse I did putting together the 3D printer. It's pretty old, but it still runs like a champ.
It looks like this can be done to the Eachine E012 too... Have you done it with that one? I have an E012 that I would like to do it too, but not sure if the small E012 frame can support it.
+Bent Props FPV I have not tried it, but I think that a camera would be too much weight for the E012 to carry. I would suggest getting a Furibee f36!
Can this quad use 3.8volts vattery with 30 to 60c rating?
Will it work with the Eachine e012 ??
nice Video
maybe Do a Controller Mod
just take some Wood plugs Drill a hole in it and glue they on for a better Stickcontroll
Very interesting video. NEATHERBOT , where have you been all my past 6 months? Glad that CZcams tossed you into my feed! I've been scratching and saving and spending much $. I have a Taranus XD9, 2 quad battery's for my (friend built) 5 inch "racing quad" with no FPV.... still just trying to learn to hover w/ line of sight. I've faced the fact that I suck at quads, so far. Friends tell me I need FPV. You know, "get the Fat Shark goggles" but I'm a noob and Fat Shark are extremely proud of their goggles and that's not including a cam....I do believe buying the Taranus was a good/smart first buy/piece of the system that I can grow with, but seems to me with your instruction/videos, I could be practicing real world FPV instead of simulator, line of sight, scared to death I'm gonna destroy my quad at any second before I even get FPV. I hope this will work for me.... Thanks for the less expensive real world option for flying FPV!
+Lewis Taylor you made my day by making this comment! So glad you find my videos helpful! Yes these micro brushed quads are a great way to learn FPV without crashing and waiting money. That Taranis was a great investment! The fatsharks are very good, but you do pay for their quality. I will be slowly moving into brushless and eventually into bigger racing quads so you can learn with me!
NeatherBot that sounds like an awesome plan! I believe you have found a great niche in all the quad FPV field. I've shared your video with a lot of my friends that can't see dumping so much money into crashing, repairing, crashing , repairing quads that cost 2-$400 just for the quad. They all loved it and we all are building micros to learn more about flying than repairing. Although repairing is important, we all want to fly longer than 1-3 minutes between having to stop, go home, order parts wait, repair, then be all anal about crashing. Thank you, Bro for making mine and many others day! Keep up the great work!
+Lewis Taylor I agree completely about wanting to spend more time in the air than repairing...I love building and fixing...but at some point you can not get any better if you never spens more tine in the air. I'm pumped to be helping others get into the hobby!
Hey, I've been flying quads line of site for about a year and have wanted to get into FPV for a while now, your video inspired me. I've ordered all the parts you've listed as well as some spares. Can't wait to give my first FPV quad a fly around the house. Thanks! I've also subscribed.
+Snuffypot11 that's great to hear! I hope you have an awesome experience. Flying FPV has been so much fun for me, I'm glad others are getting into it too! Let me know how it goes for you. Cheers!
Snuffypot11 how did it go
Awesome video man i have a question, a few of my friends and i want to get this setup, how can we all fly at the same time so we can race these? would we all need to buy a certain transmitter as well?
+joey f Yes!!! The more people the better! So you do not need to purchase anything different. You will just have to be sure to choose frequencies for the FPV gear that do not overlap. You have 40 channels to choose from so pick some frequencies that are far enough apart the you don't accidentally over power one of the other friends fpv feed.
awesome! so if we all fly at the same time with those stock controllers, our controllers for the drones wont overlap each other either?
+joey f Correct, that is the beauty of 2.4ghz controllers!
What if I made a bunch of these and then sold them to my friends for more than they costs me to make? I think I’m might do that
Wouldn't you want a cloverleaf antenna on the video receiver?
I have heard rumors of the engines/motor's dieing after 3 months of daily use.. have you experienced this? Thank you
Want to put more money in the FPV goggles and buy "the Eachine VR D2 5 Inches 800*480 40CH Raceband 5.8G Diversity FPV Goggles with DVR Lens Adjustable" Does it work with this drone in the video?
I LOVE DRONES!!
ME TOOOO!
Can I bind this drone to a Taranis QX7 controller?