X32/M32: how to Mix From Scratch (+FREE Practice Scenes)
Vložit
- čas přidán 8. 07. 2024
- these are the steps that will guide you through a mix from start to finish in case you're not sure where to start from or what to do next on the midas m32 or behringer x32 lie console
- My Instagram: / danielkharrat
- Download Practice Scenes: drive.google.com/drive/folder...
____________________
- Gate Tutorial: • X32/M32: you'll Unders...
- EQ Tutorial: • M32/X32: How to EQ ANY...
- Compression Tutorial: • X32/M32: you'll Unders...
- Distortion Trick Tutorial: • SECRET TRICK to Improv...
____________________
- More M32/X32 Tutorials: • X/M32 Tutorials
- Epic Orchestral Covers: • Epic Orchestral Covers
____________________
-TIMESTAMPS-
00:00 Intro
01:22 routing
01:46 linking & labels
03:01 input gain
04:58 fader balance
05:31 polarity, phase, time delay
07:29 panning
10:18 gate
10:51 EQ
14:45 compression
17:08 grouping channels
19:02 group vs channel processing
19:54 vocal combinator insert
21:30 effects
24:50 main LR EQ
26:13 main LR limiter
29:42 PRACTICE
DISCLAIMER: All audio files have been engineered and recorded by TELEFUNKEN Elektroakustik and are presented for educational and demonstrational purposes only.
#x32 #m32 #mixing - Hudba
Download Practice Scenes: drive.google.com/drive/folders/1H8dkzEEsCPbHukrc9UG7aU8E3OhxacSm?usp=sharing
The Multitracks can't download anymore, please check out ! ths!
hi
Very concise. A good wrap up to all the supporting videos you’ve produced. Thank you for sharing your knowledge.
1. Set the IO patching correctly
2. Always SELECT a channel or bus before editing it
3. Make sure you're on the correct LAYER/PAGE
4. Then use it like an analog console
Great video as always Daniel!
Great video! Watched it couple of times already and surely not the last time. :)
Thanks for sharing your knowledge with the rest of us!
Genius. Thank you Senseï. ❤
Yess!! Thank you for creating this video
God bless you Daniel
very helpful tutorial for beginner like myself😊 thanks for sharing your knowledge Dan🙏🏽
Excellent lesson
Excellent as always !
Thanks Daniel.
😁
This is the best channel. Thank you so much for these
Great info, lots of new info that i dont hear others talk about
Your videos arw just fabulous.. u demostrate in a really good way..
👍🏻👍🏻👍🏻👍🏻daniel kharrat🙏
I greatly appreciate you brother.
Could you do a video of when you want to use DCAs vs. Busses and subgroups?
Nice ❤
Can you please do a video on the effects of M32, and how to route the inserts
❤️❤️❤️
❤❤❤❤
A request,, can u make 1 video demonstrating setup of mixing console for live show?? I mean stage monitor mic balancing, eq tuning and main P.A equing and balancing... And how to setup your board for a live show ..and how to set gain structure... hope h hv got kmy poin
Hi daniel, can u give us tips for the range frequency for each instrument? Like for bass it s on a range 60-80 maybe, and each part of drum , and other instrument, thanks!!
I have a video on eq where i talk about the frequency ranges of the most commonly used instruments. It's linked in the description of this video
Great Video Daniel! Thank you. @21:30 EQ section: Can you pleas clarify something for me; should I apply the same EQ settings to both Bus send and FX return or one of them is good?
Short answer just eq the fx return
Longer answer it depends on how you want the effect to behave because the eq on the sends bus comes before the effect so you can use it to shape the sound that goes into the effect and the eq on the effect return is to shape the sound that comes outbof the effect
But which one is more important? It's definitely the eq on the effect return
@@danielkharrat Thank you Sir! I appreciate your time and answer.
Can you assign 2 inputs (say the L/R outputs on a synth) to a single fader on the M32?
You can assign 2 channels to a dca and control the level from that one dca fader but you cannot have 2 physical inputs on the same channel. All channels are mono, they can only take 1 input
Good morning pls I need your assistance to get better sounds
Daniel,
Question .. when you mix a multitrack on the 32, what kind of equipment are you using for the Half/final recording physical or computer ?
2, 8 or 16 tracks and how you do it ?
Thanks,
Paulo
I'm just recording the monitor LR on a usb stick with the usb recorder on the front of the console
Thanks daniel,
Are they any situation you need to record channels with processing from à multitrack ?
On what or can be recorded ?
Thanks,
@paulo espadinha i wouldn't do that myself but in case you want to do that you can assign the 16 outputs to direct out from the channels with a postfader tap and then you can go the the card outputs page and assign them to out 1-16
And you can do the same with the same with the p16 outputs for the other 16 channels
Excuse me Daniel, i don't understand the last line ?
What do you mean ?
@paulo espadinha in the routing menu you have the ULTRANET page and that is for the p16 personal mixers from behringer. On that page you also have 16 outputs other than your normal 16 outputs in the OUT page. You can assign them to direct out from channels with a postfader tap and then assign card outputs 16-32 to p16 1-16
And now you have your normal 16 outputs and the 16 ULTRANET outputs for a total of 32 that way you can record all the channels with the processing on them
your tutorial are life savior, Question: how can I download the .scn files on Mac (for downloading the scene to practice), what app can I uses?, Thank you
Nothing just use your browser. Click on the Google drive link i provided and it will open in your browser and then you can just click on the 3 dots on the top right corner or the arrow down and download them. To load the scene you have to use the m32 edit app. You can can that from the midas website
it worked....., Thank you so much Daniel, i appreciate your hard work. God bless you.
Great video. but why do your google files have a .scn extension. how do i open them plEASE
Because these are the scenes
You load them on your console, you don't open them on your computer
I think I missed something but how do I connect the computer to the board for the simulated inputs? Like physically what kinda cables and or hardware do I need and where do they get plugged into the Midas M32? I am going to start mixing for charity soon and want to practice but I don't know how to set this up to practice. I am looking at timecode 1:39 and looked before and after it but don't see that...
I linked a video about that in the description
@@danielkharrat which one? I may be being stupid but it doesn't seem clear to me which one...
czcams.com/video/14iJUC8ZRgw/video.html
I need multi tracks for mixing
I downloaded the scenes but they are not working how do i use them i have a x32 compact
It doesn't matter which consoleyou have. The scenes work on all x32/m32 series of consoles. What is not working?
Hello I downloaded the scn files but when I put the flash drive in my console m32 it doesnt see the files can you explain to me why?
Does it see anything else on the drive? If not the drive might need formatting if yes use the m32 edit app on your computer to load the scenes
I downloaded the dropbox content and when it unzipped, everything isnt available
There's no Dropbox it's on my Google drive and there's nothing zipped it's an open folder you can see everything in the browser
Can’t get my reverb on mic on the m32r to send to my monitor. I have watched your other videos and still can’t make it happen.
M32-Edit: Go to your AUX/FX layer. Notice that with Main LR selected Fx 1L, Fx 1R ... Fx 4L, Fx 4R are at unity by default. Now select your monitor / IEM bus. You will notice that Fx 1L ... Fx 4R are all the way down. Raise them to get the amount of FX you desire in the monitor(s) / IEM(s). Go easy on effects in the monitors, especially in reverberant rooms. Great way to get absolutely wicked, ear splitting feedback. Also a great way to knock your vocalist off the beat, especially if you use the same amount of echo / delay as you are sending to the mains.
Thank you @@radioflyer2030
We wants feedback avoiding with rta microphone and ping noise 🙏
does this work for x32?
i mean preset
Yes it runs the same firmware you can use the same scenes on both the m32 and x32
@@danielkharrat sounds good ty
你能分享多轨文件吗?谢谢
www.telefunken-elektroakustik.com/live-from-the-lab-season-3#download
谢谢你谢谢
肯塔基州
En français ça serait mieux
How to mix without mixing 😂
Fddsas
Can you explain more about the card input from the computer? Is that USB 2.0? Can I do it through GarageBand on my MacBook? Thanks
Yes it's the default usb expansion card that comes with the console
I have videos on my channel about how to do this on the major DAWs
Just search on my channel "multitrack recording and virtual sound check"
I have never used garage band but if you have a way to assign inputs and outputs for each track then yes you can do it
Please can i get your contact ?
You can send me a dm on Instagram it's linked in the description or an email it's in the about section of my channel