Grasshopper Tutorial (Voronoi & Weaverbird)
Vložit
- čas přidán 27. 08. 2024
- In this Grasshopper Tutorial, learn how to generate 3D parametric design using Voronoi & Weaverbird in grasshopper 3d in Rhino.
#grasshopper #rhino #parametricdesign #architecture #design #3d #modeling #architutors
So, what will you learn in this new grasshopper architecture tutorial for parametric architecture?
First, we’ll show you how to use grasshopper 3d and rhino 3d to establish a form and use it to make parametric design form using Voronoi & Weaverbird by first introducing multiple points on this geometry and make it into voronoi mesh in grasshopper to use it for parametric modeling and parametric design.
Next, you’ll go through the grasshopper scripting process or grasshopper definition to generate a parametric form by Voronoi & Weaverbird, at last making voronoi mesh into weaverbird form in grasshopper 3d, basically the surface that you can manipulate with number sliders. This is an example of parametric design and parametric architecture.
Rhinoceros is a 3d modeling software for architects and designers, and grasshopper is a plugin that is used for virtual scripting for parametric modeling and parametric design in architecture for creating parametric facade for building designs. This process is also called computational design and generative design.
This is a grasshopper rhino tutorial and you will go through this rhino grasshopper scripting for 3d parametric design. Check out more architecture tutorials for grasshopper 3d and rhino 3d tutorials from our parametric architecture playlist. These lessons will take you from beginner in grasshopper/rhino to advanced level.
architutors is a one stop platform on CZcams for architecture students, architects, designers and architecture aspirants to learn architecture software like Rhinoceros and Grasshopper.
Subscribe to architutors and hit the bell icon : urlzs.com/P7Mc4
Parametric Architecture : urlzs.com/py4z5
Rhino and Grasshopper : urlzs.com/9hqwJ
Facebook : urlzs.com/8XjF3
Instagram : urlzs.com/F1pXE
Music credits
Music: Bensound
www.bensound.com
Thank you so much! It took me a while to install weaverbird, but I finally did it!
Would be nice to be able to thicken the filaments, some parts are very thin, Could you tell us please?
Can someone tell me at 5:50 time in the video how to connect two geometries... I cannot able to connect if one connects another one disconnected. Could you please help me for this..??
Just Hold the Shift key and then connect them into one input.
@@architutors thank you so much for the reply and its worked. Big thanks to the video. It helps a lot ...
thank you! helpful tutorial how do I get the form to generate within a boundary. I need the form to be generated from certain faces in my design.
awesome !!!
Thank you! Cheers!
In 5:49 I can't join the move's Geometry and the separate Geometry togerher with the other geometry. Also, the connection Between Move's G and the Geo can't be dashed double wire. It is still single wire. What should I do?
Make sure you hold the shift key and then connect the wires to single input. By holding shift key you can connect multiple components into a single input.
@@architutors Thank you so much 😍.I'll try it!
@@architutors it worked! Thank you so much 😍
Thank you too. Cheers!!
Thank you for the tutorial, very cool shape! I was wondering if there is a way to use this script on a more complex geometry (eg 3 cubes of different scale booleaned union together)? I’m struggling to put the script on any other geometry apart from a simple cuboid shape, as the ‘flattening’ before the ‘move’ node doesn’t work properly and I’m getting dirty mesh at the end
first after creating the geometry as you desire, use the component in grasshopper called 'populate geometry' to establish points on that geometry. and then go ahead with the rest of the definition from the video.
@@architutors Thank you for your quick response! I've just tried that again however I still enquire the same problem where one of the voronoi sells doesn't get flatten when its 'moved', creating a lot of polylines next to each other that produce intersecting invalid mesh
@@user-ck9kz3lw8n you can email to us at architutors@outlook.com with the screenshot and we'll look into it
I have been watching your video and everything is working except I cant see the object with the changes that I do on grasshopper. I am in minute 3.50 and i see the box I made and also the lines but thats it
Hi. Please make sure that you're getting any error in any of those components, also that number slider values on scale factor and amplitude at not set at 0. You can turn off all the other components except for move and see if you're getting a geometry output. If you're still facing any issue, you can email us a query at architutors@outlook.com
muchas gracias excelente tutorial
Wow 😳
hola me aparece este aviso cuando uno el segundo volumen con el voronoid 3:04 ... Volume cannot be reliably computed for an open brep. Que puede ser gracias, buen video
Hi. We're not entirely sure why it might be, but you can actually share your file at architutors@outlook.com so we can exactly understand why it's showing that error.
At 2.30 when i turn hide deconstruct brep it turns off the whole model, rather than only the external box - please help! thanks
Make sure you're only turning their preview off, and actually not disabling them.
@@architutors Had the same issue. Had to enable them first and then hide the preview
5:39 don't know why but when i do Graft i get different picture, like duplicates of lines
For any queries you can email is at architutors@outlook.com
I con’t find the wb join at6:30 can you help me
Please make sure you have the weaverbird plugin downloaded for grasshopper. WBjoin is a part component of weaverbird.
I get a mistake in scale. It says “input parameter F failed to collect data”. Could you please help me? 🙏🏻🙏🏻🙏🏻Btw thank you for the tutorial!!
Same here. did you find any way out?
00:24 please what is the "f N v" input in grsshopper?? i cant find it...
Its 'Unit Z' vector component.
@@architutors found it on other youtube long ago but thanks anyways i did it.
What is the reason why loft is not run?
In the script we only required the constituent faces that we extracted from the Loft. and then converted it into mesh to apply weaverbird.
@@architutors those surfaces are not formed
@@sevvalkavakloglu8011 You can let us know your email address, We can provide you the grasshopper script. For any queries or issues you can email us at architutors@outlook.com along with the reference pictures so we can understand better and provide the appropriate solutions.
I did it on a sphere and it came out very badly...
Yes, the result on a sphere geometry may be a bit haywire. But if you use the component 'Populate Geometry' instead of 'Populate 3d' to create points on the sphere surface, the result still will be a much better one. Keep Experimenting though and tell us what you end up creating!
For some reason I'm not able to bake. Pls help!
Right click on any output you want to bake and click on the option 'bake'. Let us know if it's not showing up.
I can't get the image at 6.05
At 6.05 we used the component 'Deconstruct Brep' and taken the input from Loft component.
How did you open the options in 1:26?
To open those option just Click the mouse wheel(scroll) button on grasshopper screen.
@@architutors thank you so much bro! And thanks for answering so fast