Eachine E017 // $25 Drone Starter // Drone Gift
Vložit
- čas přidán 3. 10. 2022
- This bring back from fond memories. A touch of "story time" in this one.
Eachine E017 - bit.ly/3UT39CB
Use Coupon "BGNick2022" for 8% off
Original Eachine E010 Video 197K views 😊 - • Eachine E010 - $15 whoop?
🔥Daily FPV Gear🔥
► Goggles Orca FPV.One bit.ly/3eAgsBw 💣
► Charger SkyRC Q200 QUATTRO bit.ly/2KgUd8i
► Radio I use RadioMaster Zorro bit.ly/3JUiNrr
Zorro @ Amazon amzn.to/3uDFt8J
► Best Micro Batteries!! 💯 GNB 💯
Banggood bit.ly/2PoJglo
Amazon amzn.to/2Xw5VPr
► RDQ Batteries (Made by GNB) bit.ly/2ZsCob5
► Adhesive Welder amzn.to/2IpKKHj
► Motor Wire Tape bit.ly/3airvyv
► Same tape from Amazon amzn.to/3iJjTrT
👌🏽Affiliate links 👌🏽
If you would like to support this channel please use these links.
► Banggood - bit.ly/BG-NB
► RaceDayQuads - bit.ly/RDQ_NB
► RotorRiot - bit.ly/3N40Ebp
► AliExpress bit.ly/3vMbOZK
► GetFPV - bit.ly/3rnx05U
► Amazon - amzn.to/3iJjTrT
► Emax - bit.ly/3sn3AGm
► MakerFire - bit.ly/37TAmGo
► Heli-Nation - bit.ly/H-N-NB
► BetaFPV - bit.ly/BFPV-NB
► AirBladeUAV - bit.ly/ABUAV-NB
If you use these links to make a purchase I may receive a commission, which helps to explore more products on the channel, at no extra cost to you.
👍Reward Free Patreon + Discord
► / nickburnsrc - Věda a technologie
Time for a vote How many of you have a brushed whoop in your collection?
Eachine E017 - bit.ly/3UT39CB
Use Coupon "BGNick2022" for 8% off🤑
i gave my Tiny6s or x or whatever it was to my little brother to get him started out. gave him a tx8 i think it was, and some 800d box goggles. tons of props, and a whole bag of motors!
so i don't have a brushed one still, but you bet i did back then!
my first drone was a Hubsan x4, then an f450 Flamewheel, and can't remember the model name Armattan something or other 250 size bird with a kk2.1 board on it. no fpv back then!
I have one of those older Hubsan H107l drones, my very first one 😁
E010 was my first whoop. I fleeted them out and still use them to teach people how to fly FPV.
Yes sir I'm old school because I rip my Boldclash B03 Bwhoops in the house and my Silverware NFE whoops with 25500KV unicorn motors outside almost daily I like the no fuss handling better than brushless sure the motors wear out quicker but I got piles of them they are cheap and they got better over the years Newbee is still putting out really good brushed motors
Hi Nick I'm still runing around half a dozen brushed whoops, 3 of them E010 conversions. Eachine Bat 120, QX90C Pro the plastic framed one and a QX95. Defo got one still on the original motors the others running those black edition ones from 4 yrs back. EX120 2s brushed Hex still flying also🙂 goota love a bit of nostalgia.
Me and my son still fly these brushed whoops. Never tried anything brushless. One day we will but for now we are happy whooping around the house.
I watched your former video in approximately 2017 and decided to purchase this thing. I fell in love with tiny whoops immediately. After a few weeks I added the aio camera/vtx and fell in love with FPV. My channel history effectively proves that as I've been flying almost everyday since then. Thanks Nick!
That's great!!
I still remember the old Santa whoop 😅
Absolute classic. I mounted a cheap 25mw cam/vtx years ago myself and flew that thing everywhere. So so much fun.
My first drone was an E013. It was 60 Bucks or so and came with Box Googles. It was the cheapest way to try FPV. And boy did it get me hooked :) Thanks for the blast from the past
The image on this is SUPER clear.
Great video Nick. The E010 was a great little quad back in the day, easily converted into an FPV whoop, which for someone like me it was great because I'm hopeless with Betaflight, so this RTF kit was great. The E017 looks like we have gone up tp the next level and thankfully so have my soldering skills! I shall be purchasing at least one E017 in readiness for a bit of indoor FPV in the Christmas holidays.
You can also build goggles for $30 if you have an extra cell phone lying around by using Google cardboard and a ROTG01 receiver!
This looks like the way to go. And I have a few old phones that I'd love to be able to use for something useful! Thanks.
@@AndrewMoizer no problem. Cheap and easy.
I still have (and fly) my first whoop, it's a brushed kingkong tiny6. Great nostalgic video Nick.
My first drone experience was the Parrot AR Drone v1 in 2011, but life got busy and I didnt stay with it. Several years later, my first fpv experience in the goggles was actually the e011 with a little eachine tx03. Small investment, but massively influential on me and kick started my fpv journey to where I am today!
Same mine was a parrot drone too. Batteries were a nightmare
Bought my son a E010 as a first drone, when it broke I built him a 75mm whoop with 13° angle limit and 80% throttle cap and he uses my old goggles and controller
Haha, I still fly white Eachine H8 minis LOS outdoors at night. Super fun. You can easily mod the quad and Tx antennas to get phenomenal range.
H8 Minis rule. Zippy little bastards and super fun to mod.
I also had e010. I think it uses bayang protocol, so i even bought external rf multiprotocol module to fly it not on this toy controller.
what a brilliant little thing, as someone who only started in FPV in June 2022 it amazes me something like this was available and so cheaply back in 2017…
I’ve still got at least 6 brushed whoops. Bayang, frsky and DSMX. I still fly them on occasion. If the OSD worked on my NBD brushed whoop I’d be flying it in racegow.
This is great to see end of 2022 😍 that is how I got started in the hobby. I remember your review from back then 👍 I also have the santa one. But removed the speaker, to use it with a camera instead. It works very well.
I still fly brushed whoops. There is just something nostalgic and simple about them.
Damn! I forgot about Benedikt there for a minute! I loved his videos so much- I still think he has the best YT voice of damn near anyone - always sounded so devious and awesome…
I FOUND IT!
This video tho:
czcams.com/video/GNiLbOxCTe0/video.html
Man, that was of my biggest influences when I started flying nearly 7 years ago. I think it’s hard to overstate how impressive Dr. Ben’s flight skills were. His LOS stuff is still good to watch, but back then, with the state of quad tech when he posted it 8 YEARS AGO, he was basically unmatched imo.
Thanks for the throwback, Nick!
He did have a very unique voice and entertaining style
I watched your original video when it came out. It was the first I had ever heard of FPV. I remember buying everything from banggood and starting crashing lol. I still have one of many of those e010 flight controller for memories but haven't flown brushed in years. This kinda is making me want to go pickup this little guy to relive those memories
jump back in time with brushed whoops. many also flashed silverware to these little guys and ran a radio with 4in1 module.
Holy molly ! It bring back "souvenirs"
Hi Nick well my first FPV Drone. I picked up one and hot glued a AIO camera/vtx on top, but my frame would accept 8mm motors. Thanks for the memories.
🤚🏼 Me! I still have mine with the modified canopy, and a couple other of the “OG” bang good whoops! That are classics!! Love sharing the fun with others so I let friends try things out with these lower powered quads.
Great video! Thanks for bringing back good memories!!
This is how I started too. Mine was a JJRC H36 brand, but the e010 was the same. Good memories. ^_^
Ah yea, I haven't seen much from JJRC lately.
I started on something similar, the Furibee F36. Fun little guys that won't break the bank. The tiny whoop is a great platform to enter the hobby with, because everything you learn flying one translates directly to larger, more capable craft.
The furibee had stronger punch than this one and it's nick who tested it
@@marielizysurourcq It definitely was the most powerful tiny whoop on offer 5 or 6 years ago. Impressive little thing while the motors were good. It's sitting on a shelf now.
i did this exact mod 6 years ago love seeing this
Yo si hablo ingles, pero quiero decirte en español que me gusta tu canal, y que vivo en atlanta.
Saludos Nick!!!
Back in the day you could get a Banggood special module that would bind up to all different kinds of these toy quads. Great times 😊
Those things are still kicking around in various forms. "4-in-1" are often how they're described. They were very cool... you could get decent range out of some of these tiny drones using them (300+ meters) while flying FPV with those tiny AIO cameras on them.
The best thing was that some of these are compatible with the Jumper 4in1 module via the Bayang protocol, not the simplest thing to flash, but it flyes multiple times better than the standard, and you end up using a proper RC controller
yes, they old walkera radios with deviation and a 4in1. I had both the small and big white one. :)
This is so rad! Really cool to walk us back through time this way
Love the brushed whoops! Still have my very first whoop, a blade inductrix. Just put it all back together and set it on a shelf.
This is so awesome... love the idea to get friends interested in FPV. Wish inexpensive STEM kits were available. Thank you sir for sharing!!!!!
Awesome Nick you were able to back in time! Cheers!
Hey Nick, welcome back hope your down time with the family was great, we all need that break and family time to help us remain sane 😂😂 great review and it shows a lot of fun can be had for little money. That camera idea looks fantastic, it's amazing how well that little guy flys thanks for sharing this video with us.
Wow that Xmas addition!
Back in my day cheap toy drones use to cost 10-15$ 😂
Yep now you buy 1 bl whoop motor for that price
Thanks for the video Nike it's always good to hear some history 👍 I my self don't have a brushed quad but it looks cool.
You can buy inductrix boards for $20 here in Australia I've been putting them in the cheap quads so for about $70 you can have a inductrix whoop with fpv
Any idea if that is still a thing? I could use a new FC
great! As soon as I saw this I decided to buy one for my son. I hope to introduce him to the hobby this way
I hope he enjoys and you get a flying buddy.
E010 was the bomb, my third drone. The next cheap whoop I dug was the "Santa drone" E011C aka JJRC H67 with beefier motors. Paired with the original Jumper controller and could fly it FPV quite a ways. Honorary mention to the Eachine/JJRC H8 Mini. Good times!
dear-breathtaking ~ all the best-💫
Well, I did this. Used the TX01 transmitter. Biggest issue I find with this is that you are constantly fighting the altitude hold, it's either over or under compensating for the extra weight of the camera.
The second issue is the lack of canopy - crash, reaffix camera, crash, reaffix camera. Solution? Don't crash! 😂
With a vtx, I get about 2 mins flight time. Need more batteries and a better charger.
All in all, a fun toy.
Maybe some gorilla tape will keep it on in a crash?
and the drone cycle begins
A nice little look back Nick. I've not heard from Benedikt for a long time. Micro Motor Community was the cauldron of creativity behind so much of where we are at today. I remember building a Silverware acro capable whoop using an Eachine H8 fc and inductrix frame way back in 2016.
Last I heard (not that I know anything for certain), he stepped away to focus on a family member with a medical issue. I sure hope if so they were able to overcome the issue.
I forgot about the Inductrix; always wanted one, but the goggles were too expensive. I had(have, but it's long dead) a NanoQx which was super fun, but was priced out of FPV for a long while.
yea, the nano qx was popular and I had one as well.
I had a whole crap load of those little toy 1s drones from China from Gearbest and Banggood. They were fun little suckers for less than $20.00.
i went back to watch that video and had already given it a thumbs up. haha. i probably watched it 6 years ago actually when it was new. pretty sure that's what happened. i've been subbed to your channel since as long as i can remember watching youtube regularly.
Ben from micromotorwarehouse was the coolest dude! Love to see the brushed quads getting some love
He is still a legend to me :)
Never had a brushed whoop, but did own a few brushed tiny toy drones from WLtoys. I still have one with a very basic fpv camera that you can swap out for a water canon, bubble blower or air winch.
Love that you FPV-ed it 😆Reminds me of the good ol' days with the E010 around. I'm glad that Eachine's come out with an updated version but it's kind of a shame that the controller isn't any better and that it doesn't have acro (not that anyone would expect a quad like this to have acro). Well done with the video🙌
Currently have two acrobees that are brushed and flying but as of a week ago built my first brushless whoop and gotta say I’m loving it, also I’m going to go watch the old video again hopefully get you one more view towards the goal lol
Man i remember those! shout out to jesse p for pushing whoops so hard when no one else cared.
Yes sir. Mr. TinyWhoop has driven the Whoop community
Ah, a nice trip down memory lane. I still have my old inductrix and nano qx from Blade. Might have to dust them off for some fun nostalgia.
I'm sure this is a fun quad. Nothing too serious, just a lot of fun for 25 dollars. Great Video!!!! Excellent review.
Yep, about as cheap as we can today.
Ah the memories, loved stealthly whooping in mall food courts until security figured it out lol
back before "drones" were a known thing it was far easier to gorilla whoop in public
Fun is where you find it!
This!!
You should take that Christmas whoop and flash NFE Silverware to it... An alternate firmware with full acro capabilities and unlocks the full capabilities of those 716 motors, you'd be surprised what you can do with it!
Awesome flying and review, Nick! 😃
I still have my Fyribee F36... But I need new batteries. I should fly it more!
Anyway, stay safe there with your family! 🖖😊
this is a nice alternative for the Ryzen Tello
🤣 the Christmas one, what! This is shocking what you can get for 25 bucks, looks like fun.
Oh man, the fun I had with the E010, my first RC videos I uploaded to YT(I think they're all in my personal channel, not even here). Even did a video where I put ping pong balls on the motors and landed on water :)
i was really in to whoops around 2018 and just came back and the whole toy segment of whoops seems pretty much dead.
at the time there were tons of options with bigger motors(e011 for exemple) and hacked flight controllers and even bnf brushed for like 50$.
today it seems like you only have this one or the 100$+ brushless drones
nice
I must still have around 4 or 5 brushed whoops! Haven't flown them in many years. Those rectangular lipos they come with are near worthless! They die and can't be charged by themselves! Ultra low quality! Lol
My best brushed whoop is a custom build from way back when ... it's an E011 modified with a mini camera in between the front ducts. A very low profile... A low rider! It has the best of the best of cameras from back then. It actually worked with light transitions from dark to light pretty darn good ... Especially for back then! We've come so far! 😎🤘
we have come a long ways. Do they even make more mw aio cam/vtx? Seems that development stopped a few years ago.
@@NickBurnsFPV I haven't shopped for those or looked at them in quite so time now. Used to be able to get 200mw AIO cameras. I never bought one. Hope things are going well for you, Nick! :)
Nick nice to see you still have an e011, would have expected you to have flashed silverware on it and use a multi module. You know if this new e017 have multimodule support?
I don't know for certain as I haven't tested that in several years.
I want to get my 8 year old son into the hobby and I have already started him out with watching your vids lol😁 I got into the hobby late so brushed was not what I wanted lol I have a few toy grade "whoops" I guess you can call em but they always would drop a motor and it would be the same one🤔 so I guess the esc's on them were bad but they were different brands but still shared the exact same problem lol I have a "atoyx -AT 96" and it's the best toy grade I have ever flown I let my son fly it and after 20 or so crashes it still flies it would be a fun lil quad to throw a camera on but I really like how this lil guy flies with the camera great vid nick as always that christmas version is pretty cool!✌🏽
I have the jjr h36 version ,man I want to learn to soldier, not sure if my cheap iron helps!
Santa Claus drone is on EBay right now for like 18 bucks and can be modded into a pretty sweet whoop
I didn't check on that one. $18 is a good deal by today's prices.
Só you have a link?thanks
@@tiagomoreira8742 It lists as flying Santa Claus mini drone
@@HendrixFreakazoid thanks because that One I believe it flys better because you remove the sound module and it hás more power then standard ones.
Dont know already where I sée that review but yes.
Thanks once again!
@@tiagomoreira8742 Yes it uses the same exact flight controller as my Boldclash bwhoops and has the power boost option flys decent with the music speaker removed on the stock 716 motors but for a really intense ballistic experience put these flight controllers on a cockroach frame with unicorn motors and Gemfan tri blade props and it will rip you silly all over the house you can't even believe how fast you're moving
U can buy echine on ebay alot also brand new
Never thought to put a Camera/vtx aio on one of these (Looking at my mobula 7 v2 and RC Buggy...). I started with a HS210 and DEERC D10 then somehow discovered FPV and ordered the Cetus Pro kit (Waiting for a camera to finish a repair, it's been a while, I'm curious to fly it again). These little toys are a lot of fun for all ages. Still have the HS210 and been meaning to charge up some batteries, good LOS practice. I'm getting the hang of FPV Angle/Air mode, but LOS is pathetic. Plus you get a friend with one and play air smash em up lol. Great video! Hopefully it will give some new people ideas ^_^
My los isn't so great either. Los is easier with the self leveling on...aka angle mode.
This is awesome.. but I couldn't get What's the protocol of receiver it used.. do you know about it? it would be nice using the radiomaster wit it...
Unfortunately I don't. The only info I have found on this type of quad and protocol www.multi-module.org/using-the-module/protocol-details/e01x
Any suggestions for a reasonably priced FPV goggle that will work for this FPV setup? Also, a soldering iron that will work for this small of a job?
really any soldering iron should do the trick, smaller the point the better. Eachine EV800d goggles are a budget friendly set that could be used with the camera/vtx I added in this video.
Hmm.. Can you bind this drone to Radiomaster tx16s (multiprotocol version). Great review, great channel!
very likely using the bayang protocol like those in the past.
Any idea what the control link is for this one? Santa whoop was compatible with multi protocol modules
I don't know. I suspect it still uses the bayang protocol
Wish you had gone into the motor sizes that can make all the difference for carrying the camera. Santa drones can't be found anymore and I think they were the last with the larger motor. That speaker comes out real quick and easy, then the camera just replaces that weight. I just got a $15 H823H by Snaptain. It's alright but I think the weight of the camera would be too much.
Not sure about the santa whoop but I have been told the e010 is on ebay for like $10.
it looks like the Eachine E017 is a version of the Holy Stone HS210 but with a few differences, the HS210 has a better shaped remote and comes with 220 Mah batteries which begs the question, why does the E017 come with only 150 Mah batteries. I am wondering if the E017 uses the same board as the Holy Stone HS210 but in the Eachine E017/JJRC H36 chassis, the 2 chassis are basically the same except the battery slot is just a tiny bit deeper to fit the thicker battery, i'm running a 260 Mah in my HS210. I tried finding out if the 017 does use the same props as the 010, H36 and HS210 but i couldn't find any props for sale, if they do use the same props i found that you can increase the flight time by probably a minute or more if you cut 2 of the blade off of each prop making it a 2 blade prop, I lost a little bit of punch out but it made a big difference in my flight time...FYI
There are versions that accept silverware, even brushless motors with modifications. A lot of tinkering is needed ofc but it still makes me feel that what we fly is grossly overpriced.
ah, yes that is right. I forgot about quicksilver on these brushed whoops.
Seems great for kids, i had a pair of Inductrixes but they seem to be dying.
So the radio protocol is bespoke? You can't use a "proper" radio?
I don't specifically recall much on this particular quad from a year ago. Its possible this uses the bayang protocol like others in the past.
hello nick, what protocol is it ?
can this little gay bind to jumper t-lite jp4in1 ?
thanks for the review nick
This is what my friends and coworkers think I fly. Probably means I need new friends and coworkers. I tell them my parts list is around $200, and they send me something like this to show me I paid too much
Lol, the cliche fits, "we know what we know and we don't know what we don't".
Boy we've come far , I still have my 010 well whats left of it.
Well, I just bought one. 😂🤣😂
You bad man man!!
😂🤣😂
I've got a small all in one camera and vtx. Should be fun.
Cheap and cheerful
Oh and your code only works for those of you in US.
I'm in UK.... so bummer for me
ah, sorry the code doesn't work. I need to ask them about that. Its not right to limit to a certain country. Enough the trip back into brushed whoops.
I will ask about the code, sorry about that. Not right to limit to the US.
@@NickBurnsFPV thanks EU Will help
there is the automatic landing with a button on the controller?
Sorry I don't recall, its been a good lone while since this video. Hopefully I covered the buttons and purposes.
early squad!
if i want more batteries, are there any other that could be used?
This is very old. but the main point in the connector and the battery voltage.
Thanks for the review Nick, I’m looking for something like this to help intrude students to drones. Does this model use standard ph2.0 connectors?
It is a standard ph2.0 connector. The battery tray is wide like the 450+mah 1s batteries, but it takes the shorter variety.
@@NickBurnsFPV do you know what radio protocol these little guys use? Could I build it to a bigger radio with a cc2500 or 4-in-1 module?
@@SteadyeddieFPV I am not 100% certain. In the past we have seen these use the bayang protocol, but I haven't confirmed.
@@NickBurnsFPV I don't believe that these ever used the Bayang protocol as stock. The various iterations have used a variety of modified protocols since the original JJRC H36/Eachine E010 most of which are available for multi protocol radios. I believe (but may be wrong) that they were switched to the Bayang protocol only if they were flashed with Silverware.
Edit. Just checked the Multiprotocol list and it looks as if that was wrong and the very first iterations may well have been on Bayang and those are the ones that could possibly be flashed with the Silverware hacked software. All the newer ones (with red board and on) use different protocols.
For the price, looks like it might be a good brushed candidate for a relatively inexpensive FPV conversion, especially with a 4-in-1 radio! Thanks for the video! Fun to watch the LOS and conversion to FPV!
hey,i have a query,that is,can i use 200mW instead of 25mW fpv?or is that a bad idea?as itll consume more power.
It will consume slightly more battery energy but its very marginal.
@@NickBurnsFPV thank you
Which one is better. e010 or e017
Recalling the e010 from 6 years ago is tough. My estimation is the e017 is better, it has more fancy flight fun features and the remote is a bit more refined.
Legendary 💪
P/s: Some receiver board (e010) can be bound to multiprotocol radios. Have you tried?
I haven't tried in recent years. I believe its the bayang protocol we can use.
what vtx are you using?
I name it in the video and I believe it is linked in the video description
What is the name of the modeling clay you used?
blu tack
@@NickBurnsFPV thanks
Flash that fc :-)
silverware?
Can i bind the e017 to my Radio?
depends on the radio and if it has the proper protocol
@@NickBurnsFPV what protocol is needed?
@@qantexx978 I am not 100% certain, last time I tried it was bayang toys years ago.
can we have acro mod ?
not to my knowledge
I really wish all our fpv drones small and large had this ability to just hover in place.
This would be really useful for beginners and experienced as well.
wasnt this $10 when it first came out?? lol
The E017 is new and this form factor has had many brands and names over the years. It may have been that price but I don’t recall it
6 min flight time lool
What happened....drone to the face?
ha, no. Either to much sun from the vacation or something to bring on the visually stunning cold sore. :(
@@NickBurnsFPV Keep an eye on it and stay safe, Good Sir!
Great Video! What kind of battery did you put on for the last flight with the fpv camera?
Sorry I can't say with any certainty, this was well over a year ago. I presume it the was stock batteries it shipped with unless I noted it verbally in the video.
Loved the review
Do you still have the drone?
If you are planning to sell it I would love to purchase, because there's no way I can get it in India
I do have it, but I don't sell drones. Selling isn't something I am comfortable with.
@@NickBurnsFPV Maybe if you want to send over or something like that ... there's literally no way I can get it here in India.