How To Replace Inner And Outer Tie Rod For Honda Odyssey
Vložit
- čas přidán 30. 05. 2020
- Hi, guys today we will be showing you a step by step instructional process on how to replace the inner and outer tie rod for the Honda Odyssey.
- Auta a dopravní prostředky
Did no one really catch that it was 14.5 turns for the outer tie rod end, not 13.5! LoL 🤣😂🤣 Good job though, extremely thorough...👍
Great video, sir. I'm going to attempt this job today. And the kid yawning at 16:46 is priceless! Must be so boring recording such unexciting auto repair. lol
Great video! Haven't seen a step by step, easy to see and understand video in awhile lol
I just finished the same thing a while ago. Your video was the most helpful. Thank you very much.
Thank you! Very helpful. Will be trying this out next weekend.
Thank You!!! I find myself doing this exact repair/maintenance and your video is of tremendous value!! You Rock!!! I have some knowledge of VCM and other aspects of the Odyssey if anyone wants to compare notes. I have owned a 2006, and now a 2010.
Thank you for making this video. Great details on replacing all the required parts too.
Great video and how to replace parts the right way, thanks a lot.
Thanks for all the details. It really helps!
He forgot to show us the part number for the inner. I slowed down the video and took a clip of it 53449-SHJ-AO2.
Your kid is an awesome videographer and sleepy as well! Lol
Nice work and we'll demonstrated.
Excellent Video!
Very very helpful
Did you rent that removal tool? If not that is very expensive for a diy 1 time use
You can rent it from auto parts stores, or buy it at Harbor Freight and return them after use.
Very good video keep it up
How have your Moog tie rods held up? I've had good experience with them on a Civic. Debating now whether to use them again on an Odyssey or go with Honda parts.
This video very well
great video, where did you purchased your parts .
nice video my odyssey feels like its sliding on the road wonder if its tie rods? how come you didnt pack grease in the inner tie rod
What did you do after, " something is wrong. Lets do it again". The vid cute and rod was installed. How'd you fix the difference? What did you do?
16:46.. The background Noise😂😂😭😭😭😭
Don't you have to take into account the hiar of space made from breaking loose the outer rod when you put it back on ?
I hear your kid yawning fun fun lol. Sounds líke my kids when I ask for their help
Aren’t you supposed to pack it with grease?
16:46 to 16:48 there is a weird yawning , or something lol.
No grease in the boot for inner tie rod
2007 HONDA ODYSSEY I CHANGED MINE NOT A BIG DEAL I FOUND IT EASYER TO TRUN THE WHEEL LEFT ABOUT HALF WAY WHEN WORKING ON THE PASSANGER SIDE VERY EASY TO GET TOO.. I USED A SMALL PIPE WRINCH VERY EAST TO BREAK LOSE . BUT THE TURNING THE WHEEL YOU CAN STILL GET THE TIRE OFF AND IT BRINGS IT OUT TO YOU…😃
Are the right and left different in length?
The rod yes, not the ends...
I can't see what parts you used for repairs and where to buy them ...
These are Moog, Inner, and Outer Tie rods
why did you cut the video when something was wrong...
What a big inner clamp number ?
53449-shj-a02
TAKE OUT IF POSSIBLE NOT TO MOVE YOUR STEERING HUB SCREW ON THE NEW TIE ROD AND DROP IT IN HOLE HOLE SOMETIMES TURNS ARE NOT THE SAME!!!!!!! I DID BEFORE 20 TURNS SAME ON NEW ONE AND WAS NOT THE SAME SO JUST TRY TO TAKE OUT AND NOT MOVE THE WHEEL HUB AND MATCH IT RIGHT IN IT WILL STILL BE PERFECT
Did u hear a gosth in ur video? 16:47 minutes
Why foot pound and not pound foot.
Great video. I would like to say don't use moog products they are piece of junk . on mine 2006 Honda Odyssey i had to replace it twice. Get it from Honda it will save you the trouble.
Interesting. I just put in greasable Moogs with Zirks. Did you grease every 5k miles?
👍