Great help for my 2012 TSX wagon. This trim piece came loose and pulled some of the clips off the frame. I used your guide to get the rest off and reattach. Thanks!
Bro, I just want to say that you are awesome and thanks for this video! Unfortunately the people working on my 2010 tsx broke the clips and used epoxy. This is now my third time that I have to get it fixed smh.
Are the metal retaining clips attached to the A pillars with double sided tape? I ask because I bought new clips from Acura, and they come with a light green/yellow tape on them, but I can't peel any film off the tape.
Only one retainer clip from the trim piece on my Acura came loose. 3 other retainers are tight and I don't want to remove the trim as the loose retainer is at the top and I can just lift that edge. The retainer is attached to the plastic trim. 1) Do you recommend removing the metal retainer from the trim, then attach it to the body of the car? 2) If I won't find a good sticky tape, will the 3M weatherstrip adhesive work for this job?
Hey is it possible to remove those side trim pieces without taking the windscreen off? The previous person who installed it didn't put the very bottom clip and it's kinda loose on my car
Se llama acura tsx wind shield molding son carisimos en Ebay pagué $200 por uno usado por suerte del mismo color de mi carro en el dealer salen un poco mas caro
Alfredo to put the molding back do I need to put any kind of sealing or glue? I was just wondering bc I bought mine new ones. The driver side was all crusty and broken and I was driving on the highway and off it went. When I saw the clips they had this black sealant and idk if I need to put new sealant ?
Hecson Sotomayor you could epoxy, urethane, or any other adhesive to glue them back on. As long as you let it dry and make sure it bonds metal to metal, don’t forget to align them perfectly otherwise they won’t grab the molding correctly. Make sure you remove old glue with plastic so that you don’t scratch the paint snd cause rust problems.
bro same on my 2009 tsx i was on highway and it flew off and i see that it was attached with some black adhesive.... do you know where i can buy a replacement piece ?
GOD. Gel a molding clip tool save the clips, which is all you need to do. I will say this that Honda only sells the clips only on the molding not as a separate part
Internet Glass Network/Auto-glass.com please upload a video to see your technique. Make sure it’s the exact same model. I could save the oder models no problem.
Great help for my 2012 TSX wagon. This trim piece came loose and pulled some of the clips off the frame. I used your guide to get the rest off and reattach. Thanks!
I just broke all the clips on a 2010 tsx today wish I would have seen this sooner. Oh well I know now. Thanks buddy
James Chapman hey man next time for sure! Thanks for watching the video.
Bro, I just want to say that you are awesome and thanks for this video! Unfortunately the people working on my 2010 tsx broke the clips and used epoxy. This is now my third time that I have to get it fixed smh.
Ali Murad sorry to hear that. Thank you for taking the time to watch my video. I wish I could fix it for you.
Are the metal retaining clips attached to the A pillars with double sided tape? I ask because I bought new clips from Acura, and they come with a light green/yellow tape on them, but I can't peel any film off the tape.
I'm off to go get some clips at a scrap yard, but, I doubt they'll allow me to remove the windshield
Mine just blew off while on the highway. What happens if I dont find a replacement?
Nothing it just looks bad
Not much, I've been driving like that for 3 years after mine blew off, first the right, then the left, both at freeway speeds 😢
Is there any way to remove the old clips? Mine are too broken to re-use, thanks.
Thank you for the info sir. Very helpful.
Buena técnica mi Alfredo que buenos esos vídeos grasias
Luis Cruz gracias
Only one retainer clip from the trim piece on my Acura came loose. 3 other retainers are tight and I don't want to remove the trim as the loose retainer is at the top and I can just lift that edge. The retainer is attached to the plastic trim. 1) Do you recommend removing the metal retainer from the trim, then attach it to the body of the car? 2) If I won't find a good sticky tape, will the 3M weatherstrip adhesive work for this job?
I would use urethane to glue it down for now.
cool Technic people like you and me going to take extra time to save clips but stuff masters that hack and smash dont care and wont even try
Hey is it possible to remove those side trim pieces without taking the windscreen off? The previous person who installed it didn't put the very bottom clip and it's kinda loose on my car
I just had one of mine stolen, so I suspect it's possible. Looked like a clean removal, and that lower clip gone too.
Thanks for video.!!!
Thank you bro. A lot of help.
Como se llama esa piesa
Se llama acura tsx wind shield molding son carisimos en Ebay pagué $200 por uno usado por suerte del mismo color de mi carro en el dealer salen un poco mas caro
Thank you sir
What tool is that
eddie cuevas WRD SPYDER 3
I'm looking for the side molding for my 2009 Acura TSX or new can anyone help me on where I can purchase
grisha Theodore A local auto glass company near you should be able to find that molding and install it for you no problem.
Thank I'll try
Ebay
Alfredo to put the molding back do I need to put any kind of sealing or glue? I was just wondering bc I bought mine new ones. The driver side was all crusty and broken and I was driving on the highway and off it went. When I saw the clips they had this black sealant and idk if I need to put new sealant ?
Hecson Sotomayor you could epoxy, urethane, or any other adhesive to glue them back on. As long as you let it dry and make sure it bonds metal to metal, don’t forget to align them perfectly otherwise they won’t grab the molding correctly. Make sure you remove old glue with plastic so that you don’t scratch the paint snd cause rust problems.
Alfredo's Auto Glass Repair Corona thanks a lot for the help 👍🏽
bro same on my 2009 tsx i was on highway and it flew off and i see that it was attached with some black adhesive.... do you know where i can buy a replacement piece ?
Am trying to get the trim to order online anybody can send me a link because i can't find it?
Andre Thompson dealer only
I found one luckly on ebay same color as my acura I pay $200 bucks for it and yes 2 tabs was broken but I put some silicone on it
GOD. Gel a molding clip tool save the clips, which is all you need to do. I will say this that Honda only sells the clips only on the molding not as a separate part
Internet Glass Network/Auto-glass.com please upload a video to see your technique. Make sure it’s the exact same model. I could save the oder models no problem.
Can barely hear the video.
Kolas CDR Sound should have no problems.
Every glass co here wants me to buy new moldings & clips. $650 for nothing
I just broke all the clips on a 2010 tsx today wish I would have seen this sooner. Oh well I know now. Thanks buddy