UPLIFT 4-LEG STANDING DESK - Review and Opinion
Vložit
- čas přidán 28. 05. 2024
- This video is a review of the Uplift 4 Leg Desk with an 80x30 Rubberwood top. I will share my purchase decision making process , and will go over the assembly, features, the extra offerings, and financing options. We will explore alternative manufacturers for comparison.
TIMESTAMPS:
Introduction: 00:00
Frame Types overview: 01:00
Why the 4-Leg Desk: 02:20
Lifting Capacity: 03:49
Desktop: 04:00
Grommet Holes / Accessories: 05:15
Keypad Settings: 06:02
Anti-Collision: 07:05
Stability: 07:45
Assembly: 09:40
Wiring: 10:55
Monitor Mounting: 12:06
Wire Management: 12:48
Safety Considerations: 13:50
Warranty: 15:32
Purchase Options: 16:25
The Gist: 17:15
Links to standing desk mentioned:
Uplift desk: www.upliftdesk.com
Jarvis by Fully: www.fully.com
Vari Desk: www.vari.com
Evodesk: www.evodesk.com
The referenced GLASS CHAIR MAT video can be found through this link: • Best Glass Chair Mat -...
Amazon Affiliate Links:
The wire management wrap can be found here: amzn.to/3vXlXmU
A great How-To tutorial on building your own desktop: • Build Your Own CUSTOM ...
Thank you for watching. If you found this video useful, please give it a Like - or better yet - SUBSCRIBE to the channel.
#upliftdesk #standingdesk #office
----------------------------
Filmed with:
Canon M50 (24fps NTSC) and Panasonic HC-VX870k (30fps NTSC/25FPS PAL). - Jak na to + styl
Best review of Uplift’s 4 Leg desk on CZcams! Thank you!!
Totally agree!! I decided to go with the Uplift 4-leg desk!!!
Thanks again , Phil, for this great review!...FINALLY, pulled the trigger and purchased the four-leg Uplift sit/stand desk in dark rubberwood!
Thank you for the great, detailed review! And a super-thank you for the timestamps. I knew I was going to buy the 4-legged option, but wasn't sure about getting the stability crossbar.
Just got my desk in a week ago. Took the items out of the box tonight and came across your video. Very nicely done and detailed.
Thanks for the detailed info, really useful!
The best video out there for the 4-Leg Uplift V2. Kudos!
Loved the detailed review. Keep up the good work mate!
Just the review I was looking for, good stuff! Nice clean cable management as well...kudos.
Thank you. I’m glad that you liked it.
An update regarding the cable management- I would recommend mounting the whole power strip underneath the desk. Then just run a single cable to the wall outlet.
Aw thanks for sharing this, I have just started looking
Appreciate your detailed review. It helped me seal the deal.
This review is crazy helpful..the best one I've found so far and I've been looking for hours.
I was going to go 2 leg commercial option from Uplift but after your review decided to splurge for the 4 leg w/ commercial option. I have 2 computers and 4 monitors and I'm still not positive it'll all fit comfortably but this desk looks like my best bet. Thanks for posting this
How did it go? I use mine up to 12 hours a day and still love it.
Thanks for the video! A lot of useful information, and well thought out presentation. :)
I really like your channel so far. Great job.
Thank you very much!
Great video/review. Thank you.
This was absolutely excellent!
Thanks for the extensive review! Can you do a follow up to test the wobble of the desk at max height?
Great video, thanks for the info!
Glad it was helpful!
Great Review. I have been looking at Uplift for 3 months.
I am looking at either the Acacia or Pheasant wood top. For the Acacia, it say it is Butcher Block. Would you know what that means? The Pheasantwood is solid wood. If you could let me know, if you happen to know, that would be great. Thanks
I haven't seen the other wood types in person, so I can't help. I'd recommend hitting up the folks at Uplift. They are always quick to respond.
@@Outlaw_SEO Thanks. Some are quick. Others awfully slow. I am just curious what it means (IF YOU HAPPEN TO KNOW) what the meaning of a butcher block is vs. solid wood? I know what solid wood is. Just wondering what Butcher block means. Do you know from your experience? Thanks, man
Thank you so much for this review! I've ordered the 4leg desk without grommet holes a couple of weeks ago, it's backordered until October. I was planning on getting an Ergotron monitor arm. It didn't occur to me that there would be no room to place the clamp for the arm b/c of the rails underneath.
Thank you so much! I considered switching my desk order to the 2 leg version, but I'd rather have the stability.
I think I'll stick to a regular monitor stand instead of the arm. It's a compromise for sure but I'm not keen on the grommet holes, and my desk is in front of a window, so wall-mounted monitor arms wouldn't work for my setup either. Thank you again for the thorough review, it saved me ordering and returning the monitor arm!
It sounds like you made a correct choice. Enjoy your new standing desk. It is a life-changer. I now very rarely sit down.
Very useful video
Thank you very much, the video was awesome sauce 😎
Thanks, Outlaw, for this very informative review video!...Currently considering to purchase an Uplift Standing Desk to replace my dining room table. Since I will place three or four 27" monitors, weight capacity is very important. As a result, four leg desk is the way to go!
You won’t regret it. It can handle the weight.
really good video man!
Thank you. I’m glad you enjoyed it.
Best review. I will get the 4 legs and custom wood. It's going to be expensive. Btw, the warranty now it's standard 15y.
Excellent video man! I wish the 4 leg desk had the Eco Curve option! That's my favorite feature of my 2 legged V2. Keep it up!✌🏻
Thanks!
The curve would be nice. I wonder why it’s not offered for the 4-leg versions.
@@Outlaw_SEO I think the leg frame is the problem. The bars would go straight through the curve the edge of the curve. I might need the crossbar for my 2 legs if that helps with the weight.
That cross bar was the reason I couldn’t install the Uplift shelf on mine.
Thanks!
Thank you
Thanks for this fantastic, super detailed review! I have a "T" shape standing desk from Autonomous but have been thinking about upgrading to this 4 leg version.
Do you notice any sounds (like creaking, groaning, clicks) from the motors as the legs go up or down?
Nope. No weird sounds at all. Steady hum of the motor running, and that's it.
Great video, very informative. How many inches does the top of the desk overhang relative to the back legs?
1 inch on the back, 3 inches on the front. The side rails bring the front overhang down to 1 inch
Excellent review. Very helpful and not a sales pitch (though they should hire you, ha ha).
Phil, thank you for this very informative video!...After receiving the shipment, due to my physical disability (MS), hired some assistance and assembled the beautiful Uplift Four-Leg Sit/Stand Desk with the great-looking dark rubber wood top!....QUESTION: Where did you purchase your laptop stand?
Very helpful, THANK YOU! I was also leaning toward a 2-leg desk until I saw a mention of a 4-leg version.
One question: From your footage of the monitor arm clamp from under the desk, it appears that there is not enough room to put the clamp on the back edge because of the rail -- is that correct? I'm considering 2 monitor arms... or I could just stay with one monitor on a stand -- haven't decided yet.
You are correct. The grommet holes are positioned between the rails. The remaining lip, outside the rail, is too shallow for any mount on its own.
Check out my other video on the Zilker laptop arm mount. You could get something similar to those for a dual monitor setup.
@@Outlaw_SEO Thanks for the reply! I did watch your video on the Zilker, that was also helpful. I was leaning toward the Range arms because of the greater capacity. If I decide to use a monitor arm, I may use the bolt-through option. But drilling a hole is a big commitment!
While the 4-leg model has obvious stability and capacity advantages, it seems to create issues for a lot of the accessories -- not just the monitor arms but also the tracks for keyboard and underneath CPU mount. To design is to compromise, I suppose...
I think if I were going 4 leg, I'd get the DeskHaus Apex Pro as it's a bit better priced, made in the USA and uses the Bosch german motors.
This is such a good review!! I might go with the 4 leg desk now instead of the 2 leg one. One thing I had a question about is at 3:43 you mention the hammock. On the Uplift website, it says it’s not compatible with the 4 legged desk. Is this one from a different company or did they just change this feature? Thanks!
Edit: Would you think a monitor arm would fit with the frame? Like would the back metal bit get in the way of a clamp for the arm? Thanks!
I don’t think they make them for the 4 leg desk.
My existing monitor arm fits into the hole with some adjustments.
Check out this video for an Uplift monitor (or laptop) arm that I installed as a later addition: czcams.com/video/4aERvkOrDvA/video.html
@@Outlaw_SEO Thank you so much!! 😄
Great review !! I want it. However, if i buy from Japan, i will have to pay more than double the price due to the additional shipping costs. Still, the "UPLIFT Desk" that supports international shipping is great. I'm still discussing.
Yeah, the box is really heavy
That cable cover you mention 13 min in....is that from uplift cable package? If not...can you tell us where you found it. It looks very sleek
Here you go. It’s from Amazon :)
Sleeve: amzn.to/3vXlXmU
Cable Concealer: amzn.to/3bh9RNq
Hi, could you post a video of you pushing down on the desk at the place where the keyboard is or on the edge of the table. There are no reviews where they film themselves applying force using different angles on the desk. I want to see what would hapen when you rest your head on your arm with your elbow on the desk. Does it make the desk move or does it stay stable?
Christophe, let me know if you are interested in any other shots. If I make another video, I might as well try to accommodate several requests at once.
@@Outlaw_SEO Thanks a lot! Well, mainly shots that show any possible type of wobble that can happen. What I I rest my head on the front edge of the desk, if I lean my stomach on any side of the desk, maybe combine both. So basically, apply forces at places that could be annoying for the user.
I plan on having a stationary bike under the desk, so I want to use the desk as my handle.
Was this video ever made? I’m about to buy one tomorrow lol
Do you notice any flexing or wobble when you press down on the front of the desk? I recently bought a mojodesk and when I lift my arms off the top I notice some wobble or when I adjust my mic boom up and down it has some noticeable wobble.
It’s about the same amount of wobble I would get by pushing on a regular kitchen table. As for the flex - there isn’t any. There are 4 metal braces underneath. It’s not going anywhere.
Which kind of alternatives did you find? Which were maybe more expensive
Can you mount the 27" HP Curved monitors to the Zilker Arms to this desk along with a single laptop mount? And can it be built with 1 person only?
Make sure that the weight rating of the arm corresponds to the weight and the dimensions of your monitor. My monitor on Vivo arm is 34” wide. Even though, my engineer friends tell me, that these arms are built with higher tolerances than advertised, I would suggest sticking to the manufacturer’s suggestions.
As far as putting the desk together by yourself, I would recommend assistance when you have to flip it right side up. Depending on the size, it can be pretty heavy.
If you MUST put the desk together by yourself - then make sure to lift with your legs.
@@Outlaw_SEO Thank you! Your review sold me on the 4-leg standing desk from Uplift. They should give you credit.
Providing useful information is enough for me.
Let me know how you like it!!
Quick question, are you finding that the top is chipping at all? I've got the rubberwood as well and it's full of nicks. I sent a message to Uplift and they sent me a marker. I am just wondering if I got a bad top or if they all do that.
Nope. No chips at all (besides the 2 I show in the video) - which are more like popped bubbles in the resin pour. Sorry, man.
Question: Outlaw, how prone to scratches is the dark rubber wood desktop?
After 2 years of daily use, I haven’t scratched it yet
@@Outlaw_SEO Thank you, Filip, for the reply.
I recently bought a 2-leg Uplift, and it wobbles quite a lot when I type. It’s extremely distracting. I’m considering getting the 4-leg version instead. Does it wobble when you type?
I’ve compared my 4 leg vs a non-Uplift 2 leg - and it’s much more stable. Of course, the higher you lift any desk - the more wobble you introduce. But nothing anywhere close to wobbling from typing.
@@Outlaw_SEO The weird thing about my 2-legged desk is that the wobble is a lot more noticeable when I'm sitting vs. standing. Which makes, like, no sense to me, but there you have it.
@@hairbo - have you talked to Uplift about it?
@@Outlaw_SEO yup, a lot. Seriously considering switching to the 4-leg model.
the lack of space behind the desk for a monitor clamp is so annoying
Oh wow, it certainly looks like there isn't enough room on the backside of that desk to attach monitor arms. You would be forced to use the grommet holes. That's odd, because one of the options for this desk is a triple monitor arm from Uplift that attaches that way. You would have to attach it directly to the desk. That complicates things. I do NOT want to go back to monitor stands.
I agree
I'm surprised by the amount of wobble, it doesn't seem much better than my 2 leg
You’ll always have wobble with a standing desk. But if you use the desk for normal work, you almost never notice it. It wobbles when it’s moving or being bumped. While I’m working, there’s no wobble.
If i spent $2000 on a new desk, I would NOT be okay with "the distressed look!"
Having a few barely noticeable pin head defects is not worth dealing with the hassle of shipping this top back for an exchange.
@@Outlaw_SEO thats you're call. if youre happy with it thats all that matters.
"4k" .. shoots in low light so its in exactly 67 pixels...
Thank you for the critique. I’m still learning and light is the hardest thing to set up. It’s either not enough light and I get grain, or too much light - and I get white hotspots.
it's wobbly cause it sucks. get a deskhaus apex pro, zero wobble.