Star Knobs Jig | Free Plans | Homemade Tool
Vložit
- čas přidán 2. 02. 2024
- #woodworking #diy #starknobs #jig
⭐ Star knobs are really expensive in DIY stores. To be able to make star knobs myself that look identical and professional, I have built a device that does just that! Lightning fast, easy and very convenient!
If you set up a workshop and build a few tools and jigs, you need lots of screws and star knobs. Without a jig, these will vary greatly in shape. That's why this jig for star knobs should actually be one of the first...
▶️ (👉゚ヮ゚)👉 If you want to support my channel - please subscribe 🫶
▶️ Please leave a comment 💬 and give my video a 👍 if you like it.
Thank you very much and all the best! ❤️
Mela
▶️ 🎬 Check out the making-of videos of the cool homemade tools I used:
Strap Winder: • DIY camping tool - str...
Drill Bit Acessory Cabinet: • Drill Bit Acessory Cab...
Marking Gauge: • Bar clamps | glue wood...
Jig Saw Circle Cutter: • Jigsaw | Simple Circle...
Cross Cut Sled: • Cross Cut Sled | Multi...
Band Saw Circle Cutter: • DIY Circle Cutting Jig...
Wooden Bar Clamps: • Wooden Bar Clamps | Ho...
Bar Clamps: • Bar clamps | glue wood... - Zábava
One Very Professional Lady - Woodworker
Thank you Lou!
Sensacional!!! Muito obrigado por compartilhar
I have been searching, and searching for a knob Jig and this is the one! Thank you, Thank You Mela!!
❤️ good job, good tool, good idea. Ahh that ramp in front of the workshop!
Very impressive, possibly the best knob jig on CZcams
Thank you!
Wow, you can't get any simpler than this design. Excellent work!! This only knobs jig I have seen that doesn't use recessed hole to set the blank into. The use of the sliding arm is a genius idea instead of another cutout for a fixed blank to sit into to help hold the knob being made! I might suggest the creation of a simple hold down clamp to hold the knob in place. Then you can utilize a star knob to tighten and loosen the knob to move it to the next spot. Really great idea and it will get saved to my "Projects To Make" list.
Thank you so much, i appreciate your words!
As always, fantastic. Grateful! I will do mine!
Wow so simple to look at but it is amazing how much i need one i will be making on next time I am in my workshop thank you for the perfect design
Nice work. This is the best jig I have seen on You Tube so far. A little more work than others, but so easy to use.
Clever Girl 👧 👏 ❤
Very engineous
You can do it in many ways, but this is one of the better works I've seen. Congratulations and thank you.
Thank you 😊
Excellent work!👏👏👏👏
Eine pfiffige Idee & ein tolles Projekt 🙏🏾😉
Vim através do canal do Eddy woodworks. Amei seu canal! ♥️
Genial einfach für Sterngriff-Arbeiten, Bravo 🎉
Hola compañera, desde que te descrubi, no paro de aprender muchas cosas contigo. Genial esta guia !!! Me ha encantado. Saludos desde España.
Muchas gracias por tu comentario, ¡me alegro!
Great idea! I like it very much!
Ich habe diese Art Vorrichtung schon ein paar mal auf CZcams gesehen, da ich gerade auf der Suche bin, selber ein paar Sterngriffe herzustellen, aber Deine ist die schönste!
Super! Danke! 😊
pretty work and alwais so smart
Vraiment très ingenieux et bien présenté
Merci du partage
Bravo Mela, das ist mal wieder eine tolle und in einer Holzwerkstatt sehr gut zu gebrauchende Vorrichtung.
Wie von Dir inzwischen nicht anders gewohnt, sehr gut geplant und sauber ausgeführt!
Die relativ einfach konstruierte Sterngriff-Vorrichtung, werde ich mit für meine Werkstatt unbedingt nachbauen.
Herzlichen Dank an Dich und mach bitte weiter so!
Grüßle, Thomas🙋♂
Danke Thomas! 🙋♀️
48 - Amazing! Thanks for share!
Hallo MELA ,das ist ein Super Tool für Stern-Griffe herzu stellen, Danke für die Mühe die Sie das Video gefertigt haben.
Vielen dank, gerne, das freut mich!
Very clever👏🏼
Cool jig!
Nice design, Just added it to my build list
Awesome jig, will have to make one of those at some point!
Super gemacht, sehe mir deine Videos gern an. 😊
How awesome, such a great work ❤❤
Ingénieux, fallait y penser !
Wieder eine gute Idee in einem schönen Video (hast Du was mit Medien am Hut?) umgesetzt!
In dieser Art habe ich diese Vorrichtung noch nicht gesehen.
Und auch Gratulation zu den vielen neuen Abonnenten!
Grüße!
I love it 🌹
Very cool
Fantastico
jolie merci pour le plan
Que projeto bacana, muito inspirador, parabéns.
Genius!
Danke😀
Top das galáxias.
Toll!
Que buena idea😮
Fantasma Mela.
Tenho muita vontade de fazer.
Olá Eddy, minha tradução nem sempre é boa. Você quer recriá-lo? É incrível!
Klasse 👍👍
Einfach genial, Kompliment. Wo finde ich den Plan? Weiter so. Gruß Willi
Muito bom
Идея отличная, но для другого механизма 👍
Super
Vielen Dank für diesen cleveren Tipp.
Ich mag deine Videos: keine großen Reden, ruhige Atmosphäre, effiziente Arbeit.
Vorsicht mit deinem Ring: In einer Werkstatt kann er gefährlich sein. Einer Freundin wurde der Finger durch einen Ring schwer verletzt.
Viel Glück und Erfolg.
Danke für deinen Kommentar und für den Hinweis!
Great job. What size blanks and forstner bits do you use?
Thanks! Blanks between 3-6 cm and Forstner bits 15-25 mm. The sizes depend on your personal needs, so I have not given these measurements.
Excelente idea, muy buen trabajo.......y los planos ?
Great project thank u. Where can I find the plans pls?
My blanks are between 3-6 cm, the Forstner bits are 15-25 mm - the size depends on your needs. The plan is in the video!
Tolles Video aber wo finde ich den Plan.
Hallo Mela. Du machst viele tolle Sachen und Vorrichtungen. Hast Du vielleicht auch eine Idee wie man einen Schiebeschlitten für eine Mini Tischkreissäge bauen kann die leider keine Führungsnut hat? LG Meikel
Hallo Meikel, vielen Dank! Ja, ich hätte eine Idee! Ich hatte mal so eine TKS. Ich hab die 'Schienen' einfach am äußeren Rand gemacht - eine links, eine rechts - denn die einzige Nut war so klein, dass sie unbrauchbar war. Kannst du dir vorstellen, was ich meine? Linker Rand, rechter Rand... ODER: du könntest eine Platte mit selbstgemachten Nuten drauflegen. Nur die Schnitthöhe wird dadurch etwas reduziert.
@@MelaDIY Danke für die Idee, hört sich ganz gut an. Schade das es für sowas keine Videos gibt.
Bonjour, je suis un nouvel abonné, désolé mais je ne trouve pas vos plans gratuit comme indiqué,merci,sinon très bonne vidéo
Les dimensions sont dans la vidéo!
Quais os diâmetros dos círculos e das brocas?
Os diâmetros dependem das suas necessidades. O meu círculo maior tem 6 cm e o mais pequeno 3 cm. A broca mais pequena é de 15 mm, a maior de 25 mm. Escolhe o espaçamento que mais lhe convém. Tem de experimentar por si próprio.
@@MelaDIY Obrigado por responder. Eu entendo, porém, tendo um parâmetro para se iniciar, evita-se o desperdício das tentativas. Grande abraço 🤗
What RPM are you using for drilling the knobs? I've did something almost the same as you and my bit is jumping on then knob biting so larch chunks of wood that the piece is unusable afterwards.
Thanks for your comment. My drill is set to 1400, I think one setting less would be better - so 800 on this machine). Everything must be very tight, nothing must wobble and the drill must be sharp, then it should work.
Hallo Mella, als ich deinen Kanal abonniert habe, waren wir weniger als 100. Heute wurde dein Video zum ersten Mal in Frankreich vorübergehend durch einen Werbespot unterbrochen. Du spielst jetzt in den großen Ligen. Ich freue mich für dich. Möglicherweise können Sie sich eine Erweiterung Ihrer Werkstatt leisten.
Merci de m'accompagner ! Les chiffres que l'on peut lire sur Internet ne s'appliquent (malheureusement) pas à ma petite chaîne.
Das stimmt, aber man muss die Dinge positiv sehen, man kommt jetzt sehr schnell voran und das ist verdient. Es belohnt Ihre hervorragende Arbeit, auch wenn ich weiß, dass es äußerst schwierig ist, von einem CZcams-Kanal zu leben. Sie sind eindeutig leidenschaftlich und teilen Ihre Leidenschaft mit uns. Vielen Dank. Ich habe SketchUp-Pläne meiner zukünftigen Werkbank. Wenn Sie sie möchten, sollte ich sie Ihnen per Instagram-Nachricht senden können.
Hallo MELA, Würde das Sterngriff-Tool es gerne erwerben?
Hallo, leider kann ich nichts zum Verkauf anbieten. Aber es ist ganz einfach nachzumachen, wenn man zum Beispiel die Rundungen weg lässt.
ASMR RIP :(
Oh, I'm sorry about that. Yes, out of 12 minutes in this video, 6 minutes are with music, which is more than usual. Sometimes I have background noise, for example the fan, then I cover the noise with music. Unfortunately, we don't all have the same taste in music. Music is very important to me, so I try to strike a balance. Sometimes more music, sometimes less, sometimes none at all. So there is hope! 🙋♀️✌️
Where are the plans?
In the video! You can choose the size of the base plate as you need it.