NO LATHE. Pro-quality Wood Knob Making by pocket83
Vložit
- čas přidán 29. 06. 2024
- This video explores multiple techniques for making wooden knobs without using a lathe. It was a dense one. There were far more details than could be included in the quarter-hour. If you plan on doing this, I suggest you watch the video closely for tips. For example, those six hex-bolts on magnets weren't just for visual spice; those were also super-effective knob finishing stands. The overall process is pretty nice. It's nowhere near as difficult or time-consuming as it might look. In fact, it would be reasonable to plan on batching out enough cabinet knobs for an entire kitchen in one easy shop day.
A few more tips:
If your knobs aren't spinning true on the drill, and you just don't know why, the culprit(s) may surprise you. One likely cause of error is the threaded rod itself. Cut the piece as short as it can conveniently be, and check its straightness by rolling it on glass. Another cause of wobble might be the coupler nut. Most of them are way out of alignment with respect to having a bore that's parallel to its sides. Check your jigs systematically for where they are introducing error, and then replace the part that's mostly causing the problem. It's usually not the knob-and even when it is, you won't be able to tell in the finished product.
Finish:
Most of those featured here were finished with a clear gloss Polyurethane, which is highly recommended. The Walnut and Maple knobs in the opening shot had been finished with a pre-mix Shellac.
*****
Chapters:
0:00 Preparation
3:19 Threading
5:30 Cove
7:47 Concave
9:57 Convex
11:28 Types
*****
Music:
Latinium by Javolenus (c) copyright 2020 Licensed under a Creative Commons Attribution Noncommercial (3.0) license. dig.ccmixter.org/files/Javolen... Ft: NiGiD - Jak na to + styl
The belt sander jig @7:25 was one of my first ever video projects. Nearly a decade later, it's a bit weird to watch, but the chamfer-sander idea has proven to be awesome. It's still used frequently in my shop. Take a look if you've not seen this thing before. It's due for a better (and more concise) video, though:
czcams.com/video/sARxQ8Od1Ic/video.html
Weird, but it works
You have mastered the art of educational videos.
That is a really nice compliment. This video was a dense one. Seriously, thanks.
I see your videos university lectures!
I find your pragmatism refreshing and inspiring. I've been trying to see 'problems' through what I have learned of you lense for a couple of years now. I'm getting there. Thanks for persisting.
This is the kind of video that helps a guy like me become a better woodworker. Thanks for showing the process.
Of course. Great to hear.
your content is seriously underrated; it deserves more views for the quality you have here.
Those are excellent knobs and some thoughtful methods in shaping them. Thanks for sharing!
Great video. The steps were very well detailed and easy to follow.
PBS give this man a new yankee workshop
You are easily the best wood-working CZcamsr ever
Bon travail, ils sont jolis ces boutons! Merci pour ces précieux conseils! 👍👍
These are some very clever techniques, thanks for sharing!
Excellent technique.Than for sharing.
Been rewatching all your videos an im so happy to see new content from you
Came for the rings, stayed for the knobs
MANCRAFTS @2:15 I see some of my tool are due a label change soon. :) After drilling and tapping the wood, add a few drops of thin CA then re-tap after its dry. The threads will last a long time.
Great idea.
on the level of conciseness this is something i aspire to :)
I love that secret knob-maker's access door feature :-D you found on your belt sander.
Very well scripted and extremely informative. I really enjoyed this video and will use your techniques in my future projects. You are quite good at explaining these things, thank you for sharing.
Great video .wish I could thumbs up twice
OMG!!!!! I never knew of the 3rd sanding plane......... I'm gonna go jump out the window.....Thanks.. I didn't know I was that stupid.......
Excellent! Thanks Mr. Pocket. 😁
Thanks for what you do. I always learn something.
I've never failed to learn stuff watching Pocket
Very cleaver ! Bravissimo !
Saying you dont want to ask, is, you know... asking.
but I def learned some good things .thanks.
After over a decade and hundreds of videos, I've not once begged for likes or subscriptions. I don't talk down to you with such ass-kissing. And that's _exactly_ why my channels aren't popular. To respect your time, not once have I used a sponsor. Maybe you could consider the high price I pay in order to continue to treat you with that respect.
@@pocket83squared I can't tell if you are upset with me or not and I think that you and I both know that in the grand scheme of things it doesn't really matter.
And I think it's probably more of a hobby than an income. But that's just an assumption But I also do actually really enjoy your videos. They are very remiss and of my high school and junior high woodshop of teacher.
Glad to see you making videos
Good to see you publish again. I have missed your very particular style of video.
Fantastic video and content. I have watched every video for the last 5 years!
Nice little trick to making the cove procedure safe! I wouldn't have thought of the bearing.
Excellent video. I especially liked the way that you made the convex curves with the belt sander wheels.
Pocket83 and 83² are some of my favorite channels. I made myself a handsome oak kururin and one of those inverting folding polyhedron cube toys following his videos. I realize CZcams is not a full-time gig, but I would always appreciate more videos! Thanks for the great work and for the favor of sharing your ingenuity and creativity.
Just doing my bit for the fabled algorithm, anyway I'm probably never gonna use half the thing you make video about but I alway love watching you work and the way you explain things. I love the way you think and problem solve. Anyways love your content keep up the good work
Always brilliant!
I was going to suggest the use of thin CA on the wood threads (something known via balsa wood model making) but I see it has been already mentioned. I'd like to thank you, Mr Pocket, for showing the 'alternative' method of forming the grip side of the knob, with the portable belt sander. I'm in the process of trying to find uses for a small bench-top 6 speed pillar drill (besides drilling...) so I can justify buying one. Seeing that “hidden feature-port” on the “man/crafts” belt sander gave me an idea and one more reason. Always a pleasure, and again, thank you.
Dude, nice knobs!
Lot of great tips in this one.
Amazing tips
I’ll likely use at least one style and your technique in the near future, so thanks for this!
Great video, so in-depth.
“MANCRAFTS” I’ve watched most of your videos and that’s the first time I noticed the sticker.
Nicely done and informative. Thanks.
Lots of helpful techniques. Thanks for sharing.
Those are some good looking knobs.
Nicely done and very well explained.
These are great knobs, I am looking forward to trying this out. Great work as usual.
Simple but lovely design.
This will be an excellent t finishing touch when I refinish my kitchen cabinets. Thank you pocket!
Awesome! Definitely first channel worthy content.
Ready for Summer
Brilliant! I always love someone who thinks similarly to me. Finding multiple uses for a tool other than it's intended purpose. I still use my old Craftsman tabletop belt and disk sander and now I have another use for it. This is my first video of yours and earned my subscription! Beautiful knobs!
.....ummmmm, "Gain of Function" for woodworkin' . Thanks Pocket!
Cool video.
Interaction points! :) Thanks!
Great way if someone is wanting to make their own knobs to match their projects they are building thanks for the great ideas
Great video!!👍👍👍👍👍💪🪵
Glad you found something you like!
WOW! Thanks! I have the gear and I can do that.
I would need fancier cabinets for knobs that look that good!
On the table saw, a smaller blade will take a bigger (as in deeper) scoop. The smaller radius means it can go farther in before it hits the edges of the knob a larger radius means a shallower scoop because of the reverse.
It would be hard to match that comment with a reply that's sufficiently condescending.
Instead, you get a complete dismissal, and I'm going to get a cup of coffee.
Really high quality video, shall indeed like and share (am already subscribed) ;)
Great video again man,,,Thanks for sharing...;-)
After watching your chamfering device built, I had an interesting improvement idea for the hight adjustment, instead of actually lifting the table up and down with the wing bolts you could slide one of the table sides closer and farther apart(while maintaining parallel of course) from the other one, there by adjusting the size of the gap and effectively limiting how much "meat" is allowed to be exposed to the belt sander
Besides CZcams were you ever a formal teacher if manual arts or where do you think you got your ability to teach.
I would argue it takes a great understanding and a certain type of person to teach well
Nuts and knobs. Maybe I'm not the polite company you speak of. Either way, great video. This is just me doing some of those little things to help out.
Nice. I could use a bunch of those.
Another fantastic video. I'm guessing the methods used could, with care, be used to make aluminium knobs.
The knob design is very nice and your sanding technique makes it easy to shape. If I could suggest about the threads. I just did a video (5 Minute Wooden Knob) about using the "slide in T nut" for the threads. I find that the t nut is the easiest and fastest way to get good threads into a wood knob. Your opinion of my t nut idea would be appreciated
These would make great refrigerator magnets.
Thanks pocket
Microwave magnets!
👍👍👍
Who knew a knob video
engagement
At 8:47 you say a smaller blade will cut a smaller scoop, but wouldn't it be the opposite if the scoop goes from edge to edge? A 2" diameter blade for an extreme example would have to cut 1" deep into a 2" knob, but an extremely large blade would be almost 'flat' and barely take any material away.
The goal was really just to get you to think about it.
If you'd like to explore the mathematics of it, you'll be comparing the respective volumes of two different spherical caps of varying heights & radii; so the answer is probably not as simple as _bigger scoop + shallower = less ice cream._
But yeah, my explanation could've been more precise.
Badass! Exceptional results with minimal toolage! You do amazing stuff and I know that I'm not the only one who appreciates it 🥳 you've downplayed it in several replies but you really are the height of educational CZcams, my dude! Very much appreciate everything you do!
Okay
Now that is a sexy video!
I was the 14th like
You also got the first heart! Spend it wisely.
What's up dude
Not much. Rain day.
:)
It is a joy to watch you create
@@JThriftybee Thanks!
That's a lot of work to avoid using a lathe. If you only have a few knobs to make, fine. If you are making enough knobs to redo a kitchen, a lathe is the way to go.
Let's 100% disagree.
Car enthusiasts are “petrol heads” so knob enthusiasts are “knob head” right?