HOW TO INSTALL A DOWN PIPE ON A CU2 ACCORD EURO, ITS LOUD!! K24A
Vložit
- čas přidán 10. 09. 2024
- IN THIS VIDEO I FIT A PLM DOWN PIPE AND CAT DELETE TO MY GIRLS 2012 HONDA ACCORD EURO CU2 OUR SECOND PROJECT CAR.
check out my channel here -
www.youtube.co...
LINK TO PRODUCT BELOW:
fahperformance...
HERE IS A HEAP OF CU2 K SERIES PARTS ON MY WEBSITE
spoolup.com.au...
Check below to see my car resume:
*1991 Nissan Pulsar N14 SSS- 118kW not raced
*1996 Nissan Silvia S14 200sx -220kW 13.0@109mph
*1990 Nissan Skyline R32 GTR- 350kW 12.0@118mph
*1996 Nissan Skyline R33 GTR- 520kW 11.0@127mph
*2015 Nissan Pulsar C12 SSS- 200kW 14.0@104mph
*1998 Honda Civic EK sedan TBA-TBA stay tuned I want this baby to run a 10 second pass
Yeah I think it's a little too raspy on the lower RPMs, as you said if it was in the higher RPM range it wouldn't be too bad. - Hopefully putting a cat back in there fixes it!
i agree man
Tip from a fellow honda owner: put a cold air intake on for a deeper tone inside the cabin^
We have a full race cai in our cl9 race car, this car has a panel filter upgrade, and the aim for this car is to keep it quiet and luxury feeling
You felt change in power. I am about to make that modification to my accord 2012 2.4
yes there is certainly more top end performance even with out a tune
Thanks for the knowledge sharing video. It is very useful, I bought the same car a month ago :)
They are awesome cars
6:08 haha 😂 Now I know why my father's exhaust is silent because there are two catalytic converters
Glad to help my man
Nice, I needed the vid, I'm gonna change mine, plus full exhaust
kevin bailey full exhaust would be awesome if you want loud, my girl unfortunately doesn’t please subscribe more vids coming soon
That’s awesome please subscribe
I look forward to the update when you install the high flow cat 👌
It’s happening in 48hrs Rian :)
@@TURBOTRISTO can't wait man!
I'm thinking of getting an RV6 downpipe for my CU2 as well but I'm not sure if I want to spend more money on adding resonators or have a new exhaust set up. If it still sounds bad with high-flow cat I might just get a reflash with the stock set up.
rian x I was going to get a reflash with it all stock but the tuner said it wouldn’t be worth wile with out the down pipe
@@TURBOTRISTO same story man
That is so cool that yours comes with electronic steering, I wish the one in the states did 🔧 I wonder if that can be swapped
gaff205 i am sure it can be
the acura tsx has it (this car)
The European accord is different than the American accord, in the states the euro is sold as the Acura tsx.
Running a high flow cat and a longer/bigger resonator should help with the rasp
I did try adding a hiflow cat it helped take out around 3% of the rasp, I will add another resonator in the exhaust
@@TURBOTRISTO Yep, with this engine setup, it usually needs two decent resonators or glasspacks to kill the rasp, even without a cat delete. With a fully catless setup, if you don’t have proper resonators, it’s gonna sound a really crappy rice bucket.
Loving the smt persona music
Thanks bro
Neeeed more content on this cu2 almost nothing on CZcams on this tsx/accord
I’m waiting on parts my man
Tried getting it installed and all my bolts on the cat are stripped and rusted so probably gonna have to go buy an extraction set next week to try again sadly
Sorry to hear man
Does this downpipe fit on 2008 accord v6?
No mate definatly not
K24Z!!!
Yeah booooy
My Cu2 2011 2.0 auto vehicle. Will there be an increase in engine performance if downpipe is installed? Does only the exhaust sound change?
If you tune it it will make heaps more
I need that test pipe, i have the downpipe but not the test pipe can someone help me 🙏
Go to a muffler shop bro
brother if the change was noticed when making that modification, I am about to do it in my honda acord 2012 k24
Yes you can notice the power increase
Hey did you ever get it in your car?
Now now mate... Us Holden V8 guys use imperial exclusively haha! 🚙
blairo15 haha I edited out so much of the hassle of the adjustable nut fkkker action, I haven’t used imperial stuff since I was a kid on the farm
@@TURBOTRISTO haha! Yeah it is. Pretty uncommon these days, I still love it! 👍🚙
blairo15 I would too if I had a 5/8 spanner haha
Questions did the car actually feel better/ faster. I've got same car and I was actually thinking of straight pipe and muffler delete but I've never seen a modified exhaust on the same car live so Idk
I answered your question in my latest video that’s coming out bro I gave you a shout out the vid should be out tonite
Thank you I really appreciate that
did you end up installing a cat in this, how was the rasp. i got an full exhaust swap but was worried it be raspy if i got plm headers.
@@sushi6266 check out the other videos on the cu2 to find out
@@TURBOTRISTO cheers
How would it sound like with hks muffler only
hks mufflers are terrible so it would sound terrible
I have the US accord 2010 with the same engine and have a short ram Intake - I want to add this downpipe, but I was wondering if not completing the set with a new exhaust muffler would degrade the car more than if I didn't get a downpipe??
A full exhaust will make it loud af, if you check out the next videos in the series I fix it up it sounds stock and makes more power
@@TURBOTRISTO Just saw the vid with the high flow cat and vibrant exhaust.. so those two things plus the downpipe are what I'll get!!
Would think some glass packed mufflers would get rid of the tinny sound and give a lower note. The sound is just bouncing around the metal baffles in the stock cans.
Yes you are 100% right we have later found this and fixed the issue check out the other vids and please subscribe more parra ordered for the CU2
I have 09 cu2, standard besides bc coilovers and 19s. Whats this upgrade worth?
In australia it was around $600 before covid
Yeah nice, im in Brisbane. Where did u source it from?
Thanks for replying, muchly appreciated mate
You should put a twin loop 🔁 axle back to get rid of the drone
I will for sure do that when I turbo it 😜
I got a question for you mate ! I just got my cat deleted but I wanna know if your car started smell like emissions after? And if you did what did you do to because mine smells so bad and idk what to do..
no mine was fine, always run a cat mate the cat stops the smell
K... love my quiet driving. This wont work for me... as I also do not want another exhaust. Thinking of going with k &n airfilter, intake manifold and ecu. Woild like vtec a bit earlier...
Yeah same here man, watch the other vids I fixed it
From what I've been told by a lot of people is that there is no actual performance gain from an exhaust on the cu2 because of the down pipe set up. Keen to see the what it sounds like with the high flow cat though
RatedTypeR new video about that coming over the weekend 👌🏽😁
RatedTypeR thanks for subscribing
love cu2s but they arent race cars you are right they should stay smooth and quiet
Great car
is it legal to do this in Australia as your videos show it's very easy and cheap?
Yes it’s legal as long as you run a catalytic converter
Love the videos mate, I'm here in Melbourne to I drive a accord euro cl9. Can I turbo the k24 in it using a walbro 460 with a rising rate reg on the stock tune and ecu, will the missing link map bypass work on a k24? Also can you install the evo injectors without a retune? Cheers Chris.
On a k24 it’s best to remap the stock ecu or go with a go data, I wouldn’t do a missing like or bother with Evo injectors , just swap out everything for good quality parts a cl9 is a great car I wouldn’t do the dodgy on it man
@@TURBOTRISTO thanks mate il speak to some tuning shops around sunshine to see how much remapping would be and i suppose id need a different map sensor. Like a 4bar, what psi would you run on a stock k24. Humble performance say they take them to 500 hp with a k20 oil pump. Thats nuts. Mabey 350? Thanks again for all the great videos and sharing your knowledge, cheers mate.
@@chrisbunting6022 I would run 10psi and see how it goes
Hmm interesting. Wonder if there would be any benefit of these headers on the stock cat? Or does it just feel more powerful because of the decat?🤔
its a mix of everything the stock set up is heavily restricted by two small giant cats, they are also heavy and the "headifold" where the factory down pipe joins the block is also very narrow
@@TURBOTRISTO thanks
Thoughts with this but no mufflers?? Currently runnin no mufflers and its nice but i want more sound and some rasp
Sounds horrible as a daily our racecar is straight piped and it’s great
@@TURBOTRISTO so probably best if I got like some vibrant mufflers or something else? Anything you would recommend?
@ogxdlyflixx I did 3 videos on this check them out , I 100% recomend vibrant mufflers I used them in the other videos
Just ordered the skunk2 a few days ago, should be here Thursday and I guess my state just passed a sound law earlier this year and a law you can no longer modify or tamper your exhaust so ig what im doing now is illegal 🤷🏻♂️ but they wont know what they can’t see 👀
Lol no one uses imperial.
Curious what size drive do you use for that socket ?
Well
It’s a 1/2…… wait a minute hahaha
Hi.. how many inch down pipe and header is required for stock k24a..?? And what about Catback..
What do you mean man? I wouldn’t go bigger than a 2.5 inch exhaust as it will sound like crap for a daily
@@TURBOTRISTO currently my downpipe is 2.25 I think.. is it fine..??
yeah man but its the two cat converters that are the restrictions
Hey! Did your engine light turn on? Is there anything that I’m missing? Thanks
Yes it did but I used a code reader and turned it off and it never came on again
Thanks! I was hopping to read that!
Where did you buy that for Cu2?
Ebay
@@TURBOTRISTO Hey, mate. Just want to know how you search for that?
@@yangruilinqian6883 type in plm down pipe cu2 accord
@@TURBOTRISTO Thx, mate. U have a great day.
and no error check engine after instalation?
Yes but I cleared the code and it never came back
What do you mean the cat delete pipe wasn't direct bolt on ? The holes didn't line up your saying ?
Exactly
Not sure why they would sell a piece that doesn't fit , thats tragic news haha
@@jakeseidel4566 it was made for an American model it might be slightly different angles because of the steering wheels
@@TURBOTRISTO oh okay , good thing I have any American model. So one last qualification because Im getting ready to order these pieces, the "cat delete pipe " didn't bolt up to the new "downpipe" directly? or are you saying it didn't bolt up to your existing exhaust piping going down the end of the car ? Thanks for the help
its all explained in the install video the flanges were welded on at a bad angle is all, check the later video of me fixing the bad buzz sound, there are 3 videos on this topic my man
Sick
covid20
The audio obviously can't fully describe but it could be better
Hey did u guys swap out the r20 for a k24?????
First I'm seeing a cu2 with a "K"
I'm from jamaica
G’day mate 🇦🇺🇦🇺 welcome to my channel , I’ve never heard of an r20 is that the diesel? All crv cu2 cl9 oddessy have the K24 in most other countries
This is the stock motor 🥰
Wow...!
Its the gas version engine with exhaust at the front, i honestly hate it. But i guess its for fuel eco stuff
R20 = 2.0 vtec k24 = 2.4 twin cam vtec
Cu2 have the k24z3 engines not the k24a.. Lol
x Conan kun x awesome thanks for letting me know I’m still learning Honda codes
@@TURBOTRISTO all good, two very different engines.
what do you think of the sound?........ I think it sux
Take some getting used to I think haha. I'm a bit biased though.
Build'n'Boost it’s a bit buzz boxy
Best to change those mufflers thats the problem. I have the same down pipe ran into the same fitment issue. I'm running 200cell hiflow cat, 02 sensor defouler (straight), stock pipes and the 5x8x14 mufflers pretty sure you can get 5x8x16 or 18 long.
@linksys i dont want this car to loose its smoothness, but i bet your car sounds amazing :)
Why not just put the stock secondary cat on and see how it sounds
Can you still pass the smog test with this installed?
I doubt it , we don’t have smog tests here
Question which k24 comes in these accord is it the Z2 or Z3??
I’m unsure I’ll look and let you know
@@TURBOTRISTO thanks man
It’s the k24z3 !
how much did it cost . and where they sell it
If you search plm on the net they can help you out , I will put a link in the description
Hey man where did u get ur cu2 tuned? Thanks
Chongdata
Look up fah performance on fb
I have removed the mufflers and Resonator and my girl is loud asf
IQ gamer haha yeah that will do it
Broo let me hear it !
How many hp did I increase?
It’s very noticeable but the car hasn’t been tuned or dynoed yet
where did you buy it?
I bought from eBay but it’s PLM brand
i have the same car and i was wondering if you kept the same cat on in the bottom than would the down pipe fit??
No the original cat doesn’t fit with this down pipe, I tried that
Great idea though shame it doesn’t work
@@TURBOTRISTO what a shame :( haha thank you for the help buddy
@@sussyspacecow1 all good man
sorry to bother you again i just am thinking about getting a down pipe but why exactly didnt it fit with the other catalytic converter like what made it not bold on to the second catalytic converter
No check engine light?
Only the first time you start it
Wonder how the car is going on nowadays?
Still going strong
@@TURBOTRISTO Excellent, good to hear
Do you have engine light on after you install it?
yes but I used a Bluetooth obd reader and a free app and cleared the code it hasn't come on since
@@TURBOTRISTO my engine light come on after one night
@@Khang-wz2vl just reset it mine never came back on it’s been almost a year now
@@TURBOTRISTO tks man
no worries mate
What is the name of your facebook page or profile i need some info i have accord 2010 2.4 currently have intake + downpipe+ catback installed on car need some suggestions on turbo thanks
You can really run any turbo that has a t3 flange as you will need the flow size but it depends on budget and power goals I have done a few videos on how to set up your turbo check them out on the channel, it’s best to message me here because I can help you and you can help me by having lots of comments on my videos
My car is 2010 sedan CP and i guess my car has K24Z3 engine if i’m not wrong. What would you recommend i mean go for ebay turbo kits are they worth? (any suggestions for specific one) or something else as i was searching around on internet there is rotrex supercharger C30 (good for upto 400hp) kit also available online in Australia For $5k they claim My goal is to get between 300-350 HP. Can we get that without any upgrades of internal mods? having down pipe + cold intake and exhaust with turbo can we get that much with stock engine.
@@33Saini you can easily make that power with stock internals I would go the supercharger in that case I have seen byp in Sydney tune them to make around 400hp with low boost supercgarged
Did it throw a code
Yes but I switched it off and it never did it again
Ok so you just cleared the code and it never came back?
correct
Thanks
Hey great video. Can you please tell me where to buy the downpipe?
elusive racing
@@TURBOTRISTO Thanks for the answer. please tell me one more thing did you have problems with the lambda probe afterwards, i.e. check engine light?
Thank you.
Light came on I turned it off it never came back on
@@TURBOTRISTO and how?
@@TURBOTRISTO can you sell me your downpipe? 😄 it is no longer available anywhere.
what catback exhaust system would u recommend?
Kelvin I would chose something with a remote exhaust valve like Xforce varex
TURBOTRISTAN thank you very much will look at it!!
TURBOTRISTAN do you have a link or anything, i’m having trouble finding one. Thank you
Kelvin I don’t have a link I’m not even sure Xforce do a bolt on kit I intend to buy the varex mufflers and have a custom system made up though with the remote control valves, to be able to remote control the exhaust sound just google Xforce exhaust it will come up I have used them on all of my cars
Hey what's the name of the cu2 groups on Facebook?
Aus euro or cu2 squad