You are AWESOME!! Wow!! Love watching you in action and the results are amazing!! You make it look easy!! Keep on keeping on!! Love it!!!👍👍👍👍👍👍👍👍👍👍👍👍👍👍
oh gosh thanks its just alot of practive and many many attempts and fails so never stop trying. i literraly carve all day .. then research art and spend my nights editing .. then while balancing my personal life too but i try to always improve and u can too .. keep ripping ,,,,,YEW !!
You're SO AWESOME! I love how encouraging & supportive of other people you are! Thank you for sharing your knowledge with us! I learn something from every video and it's making it so much easier for me to think, Hell yes I can do it too! And to just give it a shot! Thanks for being so awesome!🙏🙏🙏💞💞💞
I love how you make the carvings pop out so fast and clean, of course you still have some over cut marks at that point. Also have to add, that they’re beautiful before you’re even close to done.
thanks bud well noted .. and actually unless it is a comp piece i make sure to leave a over cut/ the look of a saw cut especially on the big dollar ones that dont really call for it because i like to leave the mark of the saw and remind people that this was made by a chainsaw saw and handmade that's just something i like to do
@@RyanCookCarvin I totally get that, and I’m sure you mentioned it in a past video. Ryan, you are by far my favorite “Master” Chainsaw Carver, and you yourself as you are, makes your videos Awesome!!! Keep sharing, and I’ll keep watching and learning. Thank God for you, and your talent!🙌🏽✝️🙏🏽👍🏽✌🏽
You absolutely blow me away every time you carve something! You truly are the master!! How do like the battery Makita finger sander compared to the corded one? Thanks buddy!!!
I use a Dewalt rotary sander, 5” disc, for the rough sand/ shaping, it is amazing. Less than $100, has been flawless for many years and a pack of like 50 40 grid lasts super long time😎😎
Ryan Cook is there any type of carving you can't do !? 🤣 Your amazing I know we all tell you that but it's true Your always using different finishing off methods which gives us ideas Thanks for another great video Cheers
Awesome! one question, where do I get a mask and eye protection like yours, where I work they don't even use a mask, I try to, but my glasses get all foggy
its been broken and im waiting for echo to send me a new starter coil and its back ordered cause of the demand for those saws .. im missing it big time
@@RyanCookCarvin ,Ahhhh ~ I'm about to snag one, a bit pricey for a 25 cc saw but the weight and slim profile has me interested and my Stihl 192 is beat after 14 years. I'll check with the dealer and have him stock the coil asap. Thanks for the reply. Watching your massive raven build ~ come together right nice.
Hey Ryan. Fantastic work. What type/size chain are you using with it? I've got a ms170 Stihl on a 12" bar. Just seems the cuts don't seem to cut as well, even with a new chain. Am I doing something wrong, chain needs to be tighter/looser?
I AM USING CANNON DIME TIP BAR. I run my chain loose so it doesn't blow out the tip of the bar and can do a little more exttreme bar bending in the wood .. u dont have to do it as loose as i do till you're comfortable i do what i think is best for me but i do recommend u don't do it to tight cause that will burn out any carving bar tip
@@RyanCookCarvin Does the quality of the bar effect how well it cuts or is it more down to having a quality chain..I have Stihl chain on mine, but the bar isn't a big make. Would getting a better make bar help with the cut? Thanks Ryan
I know the bark apparently does eventually fall off, however, does this happen when set with an oil finish? I find it a shame to remove it sometimes, it gives a rustic side, right?! 😬
You are AWESOME!! Wow!! Love watching you in action and the results are amazing!! You make it look easy!! Keep on keeping on!! Love it!!!👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Its almost insulting how easy you make this look! 🤣🤣 you have mad skills my dude! Love your videos and everything you've done!
Dammmn! I'm the first 1 to watch!?! Sweeeet!
Hulio you are the man!!
oh gosh thanks its just alot of practive and many many attempts and fails so never stop trying. i literraly carve all day .. then research art and spend my nights editing .. then while balancing my personal life too but i try to always improve and u can too .. keep ripping ,,,,,YEW !!
Love it. 2 d is harder for me than full carve. Thanks for sharing
You're SO AWESOME! I love how encouraging & supportive of other people you are! Thank you for sharing your knowledge with us! I learn something from every video and it's making it so much easier for me to think, Hell yes I can do it too! And to just give it a shot! Thanks for being so awesome!🙏🙏🙏💞💞💞
WOW THANKS THAT MAKES ME HAPPY AN WANT TO DO MORE VIDS
Awesome tips you pass on and share with us. Thank you for being an inspiration! 🤙🏽
You're a blast man! Your positivity can-do attitude is infectious.🙌✌
I appreciate that!
Thank you "Master"....humbled I am... Once again...
I truly appreciate your talent and willingness to share!
Blessings to you and yours..
THANKS BUD HAPPY TO HELP
As always a great example of your understanding of your craft...
Great as usual...love watching you work...🌿🌿🌿
Thank you so much 😊
Awesome man. Once again im floored by your chainsaw techniques. Thanks for sharing.
thanks so much
Love 2 see u do something like this 4 beginners who have no dimetip bars, just standard. Great vid, always enjoy ur work m8. Cheers.
I appreciate that!
I can't wait to try it. Thank you for another kick ass video
Thank you for all of the great instructional content. Love it!!
You are so welcome!
Great video, great attitude towards others
Thank you for all the crucial tips 🇺🇸
Thanks for watching!
Great video again Ryan. Learn something every time I watch the video.
thnks bud ncs
I love this piece! Wish I could afford it. Beautiful!!
Thank you very much!
I love how you make the carvings pop out so fast and clean, of course you still have some over cut marks at that point. Also have to add, that they’re beautiful before you’re even close to done.
thanks bud well noted .. and actually unless it is a comp piece i make sure to leave a over cut/ the look of a saw cut especially on the big dollar ones that dont really call for it because i like to leave the mark of the saw and remind people that this was made by a chainsaw saw and handmade that's just something i like to do
@@RyanCookCarvin I totally get that, and I’m sure you mentioned it in a past video.
Ryan, you are by far my favorite “Master” Chainsaw Carver, and you yourself as you are, makes your videos Awesome!!!
Keep sharing, and I’ll keep watching and learning. Thank God for you, and your talent!🙌🏽✝️🙏🏽👍🏽✌🏽
Another great carving Ryan. Awesome job.
Thank you JM! Cheers!
Great job RC thanks for all the ideas you give all us novice…..
Glad you like them sid
That’s so cool, great job! Love your videos and carvings 👌
Thank you very much!
You make it seem as easy as buttering bread! Great looking carving Ryan!
THANKS BUD
You absolutely blow me away every time you carve something! You truly are the master!! How do like the battery Makita finger sander compared to the corded one? Thanks buddy!!!
Thanks Ryan alot of useful knowledge dropped in that one much appreciated
my pleasure
Great piece Ryan. Great tutorial. Thanks
Glad you liked it!
great carve love the heron thks Ryan
thanks Neil appricate it
Done so simple with masterful detail nice going.
Awesome RM, thank you!
Great job once again Ryan
Awesome job Ryan love it .
THANKS GM
Great job.
Sweet quick carving nice Ryan!!
Thanks ML 👍
Love the carving man!!!
THNKS DH
All your sculptures are absolutely glorious, beautiful, this one Will also gray heron🙂👏👏
COURSE WHY NOT THANKS M.R .
@@RyanCookCarvin Thanks for this tutorial video☺️👍
Pretty cool project 👍
Trapper scotty in Alaska, I'm impressed, nice throw down, heron is rare here to see along the coast. You did justice to the Great Blue Heron bro
thanks dude do u make trapping vids ?
Красота👏👏👏 Спасибо за видео. Thanks!!!!!
THANKS OM
Awesome carving Ryan
thnks
Awesome work Ryan always
THANKS SO MUCH GT
Awesome vid!
great work Ryan!
THANKS JW
Love it Ryan
THANKS AS
Nice Job Ryan thanks for sharing
Any time MM
Outstanding 👍👍
I use a Dewalt rotary sander, 5” disc, for the rough sand/ shaping, it is amazing. Less than $100, has been flawless for many years and a pack of like 50 40 grid lasts super long time😎😎
Great tip!
Great job 👏👏👏👍👍👍!!!
THNKS KP
It's easy wonderful
Nice!👌👌
thanks so much
Nice 🤩
thanks
Really nice Ryan 👌👌👌👌💯💥
Thanks bRIAN MEANS ALOT
good job. nice biseps💪
Thank you so much 😀
Hi Ryan
So cool
You good job video
You thanks video
👍👍👍👍🏅🏅🏅🏅🏅
thnks
jay
appricate it
Super👍👍👍
Bro that looks amazing I did something just like that and a giraffe
WICKED IDEA ILL try a giraffe one day
awesome
THANKS BP
Muito bom gostei 🙋💪👍👏👏👏👏👏👏Brasil
Ryan Cook is there any type of carving you can't do !? 🤣 Your amazing I know we all tell you that but it's true Your always using different finishing off methods which gives us ideas Thanks for another great video Cheers
Wow, thank you!
Awesome! one question, where do I get a mask and eye protection like yours, where I work they don't even use a mask, I try to, but my glasses get all foggy
YOUR GREAT! WHO NEEDS HOLLYWOOD AYE?
May I ask how thick this wood was for this piece?
Master wood What tree do you use?marssi
Donde consigo el flap sanders
Great energy ~ nice style. You have a few smaller canon barred saws ~ any reason why you didn't use your 2511 p ?
its been broken and im waiting for echo to send me a new starter coil and its back ordered cause of the demand for those saws .. im missing it big time
@@RyanCookCarvin ,Ahhhh ~ I'm about to snag one, a bit pricey for a 25 cc saw but the weight and slim profile has me interested and my Stihl 192 is beat after 14 years. I'll check with the dealer and have him stock the coil asap.
Thanks for the reply.
Watching your massive raven build ~ come together right nice.
Wow hammer geil
Bad ass
thnkKS EJ
Never mind my friend. I heard you give the dimensions at the end of the video.
Where did you find the attachment for the flap sander on your drill ?
bob king website
Man where i can buy this sabre ? You use small
What kind of payments can a person use to subscribe to your channel..? Can a people's use a pre paid visa or something like that? Asking for a friend
Hey Ryan. Fantastic work. What type/size chain are you using with it? I've got a ms170 Stihl on a 12" bar. Just seems the cuts don't seem to cut as well, even with a new chain. Am I doing something wrong, chain needs to be tighter/looser?
Think he uses diamond blades or something he said in video
I AM USING CANNON DIME TIP BAR. I run my chain loose so it doesn't blow out the tip of the bar and can do a little more exttreme bar bending in the wood .. u dont have to do it as loose as i do till you're comfortable i do what i think is best for me but i do recommend u don't do it to tight cause that will burn out any carving bar tip
@@RyanCookCarvin Does the quality of the bar effect how well it cuts or is it more down to having a quality chain..I have Stihl chain on mine, but the bar isn't a big make. Would getting a better make bar help with the cut? Thanks Ryan
Hi mate what. Is the sander machine called you was using
i assume flinger sander you are asking about
yeew
yeaaa buddy
What type of wood is it?
cedar second growth
I know the bark apparently does eventually fall off, however, does this happen when set with an oil finish? I find it a shame to remove it sometimes, it gives a rustic side, right?! 😬
it will over time nut som,etimes it doesnt
@@RyanCookCarvin Thx !
, 👍🇩🇪
YEW
Hey Ryan u expecting a new member to the household. Doing a stork.
lol no no no
🇺🇲😎🎉🤠😁👍🤘🤘🤘
thanks matt
Why did I wait so long
the time is now