I know it is a 1:24 record. I saw a 1:10 guy do 70 degrees in a video. Nobody has claimed above that from what I have seen so far at any scale. I plan to beat it again in the next week if all goes well.
Impact. ; ) Clipboards are good because they are ridged. They do not bow through the middle and change angle as you rise. A long board that bows will naturally have less angle at the bottom and more at the top. For a long board I'd like to see measurements taken at both ends of the and the middle to make sure the angle is consistent. Otherwise you are measuring the angle of a half pipe at only one position. It is not valid.
Needs to be adhesive sandpaper and not cloth. Cloth stretches and folds behind the wheels, basically holding on to them an essentially creating a different angle that it's actually climbing at.
Thank you. : ) I have some parts on order for one of my other trucks that I think may climb even steeper. Once I start down a path I discover new ones. Win or loose I hope to post a video of the attempt in 7 to 10 days.
Thank you. : ) It was configured specifically for climbing in this video. I will probably need to keep it like this for a while to prove this is legit for people who suck. 😜
Nice climb , are there any rules on what the climbing surface is to be , I see you had some cloth on the board you used have you tried different types of coverings , also what is under your chassis it is very low to the board I can’t think what that is , have you made and progress since this video, stay safe and happy new year mate .
I was trying to see how far I could push it to find the maximum climb angle. It won't crawl like this. I mounted the battery and some weight to give it the lowest CG possible.
That's right it is. 😉 I am glad you mentioned the possibility of a magnet. If you thought it someone else might have too. I want there to be no doubt that what I show is legit.
Longer links are probably the only thing that could have given it more. 73 was near the tire limit anyway. My SCEnduro24V did 73 degrees with no body. I don't count that one.
So look forward to not showing you up but hell jeep running but Crap decided for 100th time to stop working I believe you Scared the Life out of Toughness Axial Jeep, It worst than me God that's bad
Thank you. I was going for the world record. It may be for vehicles without magnetic or chemical traction enhancers. The only grip provided is between the tires and the surface.
Correct. The idea was to eliminate tire grip from the experiment so I could discover the incline limit of the chassis. I eventually got to 73 degrees with another chassis. Below is a link to a recent tire test video where I weighted the chassis specialty to try to determine the traction limit of the tires on grip tape and cardboard. The results may surprise you. czcams.com/video/wkdUzkTDhxw/video.html
Cool video. Up for another challenge? Do it with a stock body car and no battery under the front. Make it real world crawlable. Let’s see the best angle you get with those stipulations.
What? 🤪 Stock body? That is crazy talk. Only one of my six SCX24s has a stock body and it is a B17 still in the box. Its not coming out any time soon. ; ) I did a previous climb at 66 degrees. I am pretty sure I could beat it knowing what I know now. I did a 64 degree climb with Mud Slingers in another video if you look around my channel. Big tires hurt climb angle. This is an earlier video of mine: rumble.com/vjzil7-world-record-incline.-66-degrees.html
I can do 64 with the battery in the normal spot. But that's pretty cool I suppose.. if you make a tray with the battery that's touching the ground you might be able to hit 80 if you put some weights on there.
Mine did 66 with everything in its stock location. I know how to get more out of it but I think 75 or 76 is going to be about all. The tires won't hold at 80 degrees even if I had the CG to do it.
It has been painted since this was put together. The wheels came directly off of an Enduro24. Totally stock with brass hex weights. czcams.com/video/9xaJXS5KSKo/video.html
But your on a micro fiber? Is that normal im sure more grip to be had with bunching up material... do it on something that doesnt bunch under tires, i know for fact it climbs easier on that substrate.also good for challenge i supose bit useless otherwise is the battery underneath, can only climb flat verts or can it climb an obstacle i modded mine with another servo to compress suspension when wanted for extra angle, gets me about 4° more angle with all my body and lights and stuff. Best of both worlds gets good angle and can crawl anything.
Yes. I mentioned that in the video when I talked about it being an open competition. Batteries are moved in full sized vehicles for better weight distribution. I did it with my 1:24 as well.
You just kick the teeth out off my wall of doom,King of the wall Climb, Credit because you deserve it,And the the Drop at the end Straight Pimping,,Again when I am wrong no problem saying so ,phone tools work, seems like 6 months ago I about got ran off just help my father he proved it,so what app is that Wall King,and Keeping the Hard Shell Jeep body handicap of??????I need it to keep things safe Congratulate let me no about that app I will post what I am able in few hours Thanks man🏆all I could get to you is short time, people said magnets show how there thinking
Thank you my friend, very gracious. 🙂👍 You know what else? I think I have another rig that can beat it. ; ) It will need to be configured for climbing again. It is the mutant SCEnduro24X that I earlier pulled 63 degrees with. If I apply the same suspension and weight tuning I'll bet it will do 74-75 degrees. It will probably have to wait for about a week and a half though. I need some parts and one of my hands will be out of commission for about 5 days starting tomorrow.
@@EXPIOWA I would love to see how a Pro would set it up! Not that many to look up too! Most may see it as silly or maybe notwhatitwasmeantfor,but my toy I can play with it how I want too! Besides with out realizing it I had literally had over a ton of Mother Nature's Coolest inside! Toes snap easier than ever,simply peace of plywood with, I use I call it Roll Rubber, it's for some roofing purposes?? How I got it who knows but great for grip and making some unrealistic video some would rather believe fake, and I don't know nothing, simply hope to have a running working SCX24 Beater Mini Bus that works under its own power by morning, these O.G. 88ts moters are kinda a Joke, or this other 4 letter word,but Not getting into dodo talk! Keep it looking upward!
@@EXPIOWA I thought you had gone brushless kinda getting more pricey well not really, were I will go with pricey on part? I believe I have had a run of bad luck with this little jeep for the get go! Starting with it out of the box not working, I will say probably been made fun of the most for my manic, frantic ,need to keep it working,I am just at a better place mentally would fit ,have some rc at the end of the day or the parts to get it going! I will admit 88t I have just basically finished 3rd swop but they fit ,and work for what I like to do,it seems this esc #2 is seemingly holding more and more heat! I don't run light's, and unfortunately the survo is working but the box holding the working part is broken with a hole in the top,I what to get better shocks ,tires , and couple other things but being honest money has never been worse, I am just holding my breath for when I hit the switch and it is not stirring, Upgraded servo is on that list but ,I don't care about any upgrades as long as it keeps on working! My comment earlier new rig or new build, Hay money is not great please don't waste your money on something because of something I say,I would like copy your method, it may not be possible being I have the Jeep,Can you tell me is the differences between the SCX24's other than the body? Do you use 3D printed parts? That would be amazing to be able to use that type of technology to make parts but I have had time with smart phones as I'm sure you can tell trying to read my messages!If you know any free performances fixs Or hacks, please let me know! I don't have money to keep up,My concerns about this servo are growing any moment Fun will be over for couple months Keep that Record It would be Super cool to be silver medal behind you on the wall of dooom
This may not be something you hear every day, may u do? Figured maybe it could not hurt to ask, if you have any tires,shocks, servos for SCX 24 you tired of don't particularly like, stuff sick of looking at maybe u could may want to get some money from it if its not to crazy expensive ?? I would try to buy used stuff, reason I got to thinking about it ,I compressed my stock shocks I got the idea from something you said, I could have misunderstood?I put rubber bands around them and a clicking sound spooked me! I cut the rubber bands and these old shocks have yet to spring back to life so my low rider Jeep is scrubbing body, but when crawling over some stuff rolling off it did look more solid, body not bouncing, rocking all worn out like! Hope I'm not out of line asking
That was pretty damn impressive! Good job And CONGRATS! doubt anyone can find fault with these results. You did a good job with covering your ass, by debunking any potential claims that you cheated, prior to the attempt.
I’m vary impressed. Great job man. If that’s not breaking a world record I’m sure u just set a world record for Mini RC crawling
I know it is a 1:24 record. I saw a 1:10 guy do 70 degrees in a video. Nobody has claimed above that from what I have seen so far at any scale. I plan to beat it again in the next week if all goes well.
Wow just wow
Hell ya!!
Well done! You scared the 💩 out of me at the end. 😅. I’m getting a clipboard!
Impact. ; )
Clipboards are good because they are ridged. They do not bow through the middle and change angle as you rise. A long board that bows will naturally have less angle at the bottom and more at the top. For a long board I'd like to see measurements taken at both ends of the and the middle to make sure the angle is consistent. Otherwise you are measuring the angle of a half pipe at only one position. It is not valid.
Needs to be adhesive sandpaper and not cloth. Cloth stretches and folds behind the wheels, basically holding on to them an essentially creating a different angle that it's actually climbing at.
The height of the axle above the surface never changes. Therefore the angle of climb doesn't either.
Awesome looking truck, great video my rc friend 👍💪😀
Thank you. : ) I have some parts on order for one of my other trucks that I think may climb even steeper. Once I start down a path I discover new ones.
Win or loose I hope to post a video of the attempt in 7 to 10 days.
I have a Tex 4 that will do 65 but 72 is unreal that’s awesome man sweet rig and sweet run
Thank you for writing. 65 is incredible for a 1:10 rig!
Wait until you see what I have planned next. I think I can beat 72...
nicely done sir!. I don't think I have a rig that can even come close to that. But you make me want to try. LOL
Thank you. : ) It was configured specifically for climbing in this video. I will probably need to keep it like this for a while to prove this is legit for people who suck. 😜
@@EXPIOWA some ppl do suck, it is unfortunate! LOL
I think I know how to do even more. That's the crazy part. I learn every time I do something.
Far out!!! 🤘🏻🤘🏻
Nice climb , are there any rules on what the climbing surface is to be , I see you had some cloth on the board you used have you tried different types of coverings , also what is under your chassis it is very low to the board I can’t think what that is , have you made and progress since this video, stay safe and happy new year mate .
I was trying to see how far I could push it to find the maximum climb angle. It won't crawl like this. I mounted the battery and some weight to give it the lowest CG possible.
Haha...I was just kidding about the magnets. You still rose to challenge. That's one heavy transmitter you got there.
That's right it is. 😉
I am glad you mentioned the possibility of a magnet. If you thought it someone else might have too. I want there to be no doubt that what I show is legit.
🧐🤘 not too shabby!
Battery under the truck 🤔
Take the roof off and put small front and rear tires 🤣
I used Enduro24 tires. You can't go any smaller. The roof weighs almost nothing. It was maxed out. : )
@@EXPIOWA Very impressive. I would love to own an scx24 but I’m too cheap 🤣 I have to be a financially responsible young adult now sadly
@@ZacharyTelesca Save up. They are only $140 to get into the game. 🙂
Well done .
Moter#2 esc combo2 I didn't want to miss Traxxas love the that drop
HELL YEAH BROTHER
Bro you can make it climb steeper your front shocks are so lifted also try mod that body
And you probably get 75°
Longer links are probably the only thing that could have given it more. 73 was near the tire limit anyway. My SCEnduro24V did 73 degrees with no body. I don't count that one.
So look forward to not showing you up but hell jeep running but Crap decided for 100th time to stop working I believe you Scared the Life out of Toughness Axial Jeep, It worst than me God that's bad
This is awesome
Thank you. I was going for the world record. It may be for vehicles without magnetic or chemical traction enhancers. The only grip provided is between the tires and the surface.
That's a special cloth. Probably a micro fibre cloth that attaches to the tires well. Let's see you do it on a plywood!
Correct. The idea was to eliminate tire grip from the experiment so I could discover the incline limit of the chassis. I eventually got to 73 degrees with another chassis.
Below is a link to a recent tire test video where I weighted the chassis specialty to try to determine the traction limit of the tires on grip tape and cardboard. The results may surprise you.
czcams.com/video/wkdUzkTDhxw/video.html
Cool video. Up for another challenge? Do it with a stock body car and no battery under the front. Make it real world crawlable. Let’s see the best angle you get with those stipulations.
What? 🤪 Stock body? That is crazy talk. Only one of my six SCX24s has a stock body and it is a B17 still in the box. Its not coming out any time soon. ; )
I did a previous climb at 66 degrees. I am pretty sure I could beat it knowing what I know now. I did a 64 degree climb with Mud Slingers in another video if you look around my channel. Big tires hurt climb angle.
This is an earlier video of mine:
rumble.com/vjzil7-world-record-incline.-66-degrees.html
Insane. Nice work.
So nice! Are you using any kind of treatment for the tyres?
No. I made that clear in the video. It is on a 3M car towel that does not shed lint. It is not microfiber material but it is not terrycloth either.
@@EXPIOWA Thanks
I got to 68º on an amazing huge rock slab...then 69º...then roll all the way down rock slab...you get good at catching in this game...
For sure. In nature all you need to do is get a front wheel hooked over an obstacle and you can pull 90 degree lines sometimes.
I can do 64 with the battery in the normal spot. But that's pretty cool I suppose.. if you make a tray with the battery that's touching the ground you might be able to hit 80 if you put some weights on there.
Mine did 66 with everything in its stock location. I know how to get more out of it but I think 75 or 76 is going to be about all. The tires won't hold at 80 degrees even if I had the CG to do it.
Do you have a build video or list for this amazing rig? How are these wheels and tires set up?
It has been painted since this was put together.
The wheels came directly off of an Enduro24. Totally stock with brass hex weights.
czcams.com/video/9xaJXS5KSKo/video.html
Why not buy some skateboard tape to put on the clipboard
It provides worse traction for these tires. I tried that too.
you gonna have to start wrapping your transmitter with bubble wrap.
From all the winning?
😜👍
@@EXPIOWA BOOM! 🎤⬇
But your on a micro fiber? Is that normal im sure more grip to be had with bunching up material... do it on something that doesnt bunch under tires, i know for fact it climbs easier on that substrate.also good for challenge i supose bit useless otherwise is the battery underneath, can only climb flat verts or can it climb an obstacle i modded mine with another servo to compress suspension when wanted for extra angle, gets me about 4° more angle with all my body and lights and stuff. Best of both worlds gets good angle and can crawl anything.
It is a 3M list free car towel for waxing. It is not microfiber but it is also not terrycloth.
Is that your battery thats mounted to the bottom of your rig
Yes. I mentioned that in the video when I talked about it being an open competition.
Batteries are moved in full sized vehicles for better weight distribution. I did it with my 1:24 as well.
You just kick the teeth out off my wall of doom,King of the wall Climb, Credit because you deserve it,And the the Drop at the end Straight Pimping,,Again when I am wrong no problem saying so ,phone tools work, seems like 6 months ago I about got ran off just help my father he proved it,so what app is that Wall King,and Keeping the Hard Shell Jeep body handicap of??????I need it to keep things safe Congratulate let me no about that app I will post what I am able in few hours Thanks man🏆all I could get to you is short time, people said magnets show how there thinking
Thank you my friend, very gracious. 🙂👍
You know what else? I think I have another rig that can beat it. ; ) It will need to be configured for climbing again. It is the mutant SCEnduro24X that I earlier pulled 63 degrees with. If I apply the same suspension and weight tuning I'll bet it will do 74-75 degrees. It will probably have to wait for about a week and a half though. I need some parts and one of my hands will be out of commission for about 5 days starting tomorrow.
@@EXPIOWA I would love to see how a Pro would set it up! Not that many to look up too! Most may see it as silly or maybe notwhatitwasmeantfor,but my toy I can play with it how I want too! Besides with out realizing it I had literally had over a ton of Mother Nature's Coolest inside! Toes snap easier than ever,simply peace of plywood with, I use I call it Roll Rubber, it's for some roofing purposes?? How I got it who knows but great for grip and making some unrealistic video some would rather believe fake, and I don't know nothing, simply hope to have a running working SCX24 Beater Mini Bus that works under its own power by morning, these O.G. 88ts moters are kinda a Joke, or this other 4 letter word,but Not getting into dodo talk! Keep it looking upward!
@@whome7004 I like the 88T motors. They are light and mount low.
@@EXPIOWA I thought you had gone brushless kinda getting more pricey well not really, were I will go with pricey on part? I believe I have had a run of bad luck with this little jeep for the get go! Starting with it out of the box not working, I will say probably been made fun of the most for my manic, frantic ,need to keep it working,I am just at a better place mentally would fit ,have some rc at the end of the day or the parts to get it going! I will admit 88t I have just basically finished 3rd swop but they fit ,and work for what I like to do,it seems this esc #2 is seemingly holding more and more heat! I don't run light's, and unfortunately the survo is working but the box holding the working part is broken with a hole in the top,I what to get better shocks ,tires , and couple other things but being honest money has never been worse, I am just holding my breath for when I hit the switch and it is not stirring, Upgraded servo is on that list but ,I don't care about any upgrades as long as it keeps on working! My comment earlier new rig or new build, Hay money is not great please don't waste your money on something because of something I say,I would like copy your method, it may not be possible being I have the Jeep,Can you tell me is the differences between the SCX24's other than the body? Do you use 3D printed parts? That would be amazing to be able to use that type of technology to make parts but I have had time with smart phones as I'm sure you can tell trying to read my messages!If you know any free performances fixs Or hacks, please let me know! I don't have money to keep up,My concerns about this servo are growing any moment Fun will be over for couple months Keep that Record It would be Super cool to be silver medal behind you on the wall of dooom
This may not be something you hear every day, may u do? Figured maybe it could not hurt to ask, if you have any tires,shocks, servos for SCX 24 you tired of don't particularly like, stuff sick of looking at maybe u could may want to get some money from it if its not to crazy expensive ?? I would try to buy used stuff, reason I got to thinking about it ,I compressed my stock shocks I got the idea from something you said, I could have misunderstood?I put rubber bands around them and a clicking sound spooked me! I cut the rubber bands and these old shocks have yet to spring back to life so my low rider Jeep is scrubbing body, but when crawling over some stuff rolling off it did look more solid, body not bouncing, rocking all worn out like! Hope I'm not out of line asking
That was pretty damn impressive! Good job And CONGRATS! doubt anyone can find fault with these results. You did a good job with covering your ass, by debunking any potential claims that you cheated, prior to the attempt.
Thank you Peter. 🙂
You can prolly do these so easy with the easy with the cinemoto new chassis check it out on yt
I will check that out. Thank you.
After looking at it, it should do well if weight is properly managed for climbing. Good luck passing 72 though. 😉 Please try.