MakerHawk 150 Watt Battery Capacity Tester
Vložit
- čas přidán 26. 08. 2024
- The MakerHawk Electronic Load Tester Is A 150 Watt Battery Capacity Tester. Use It To Test New Batteries To Ensure You Are Getting What You Paid For. It's Also Great For Testing Old Batteries To See How Much They Have Degraded Over Time And If They Are Still Usable. You Can Also Use This To Drain Your Batteries For Long Term Storage. In This Video I Show You How To Use It, As Well As Some Settings You'll Want To Change Out Of The Box So You Don't Accidentally Destroy It!!!
★You Can Get One Here From My Amazon Store Under "Batteries, Solar, 12 Volt Stuff"
www.amazon.com...
As an Amazon Influencer, I earn from qualifying purchases.
Consider becoming a Patron @ / k8mrdradiostuff
Follow me on Twitter. / k8mrd
Big Geek Battery Box, k8mrd.square.site
Watch the video here: • Big Geek 12V Ham Radio...
Tri-Lam BuddiStick Pro Counterpoise Support: k8mrd.square.site
K8MRD Radio Stuff Shirts:
Happy Skull Guy: grapevineamate...
Tower of Terror: grapevineamate...
Parks On The Air Merch (non affiliate) www.clubgearon...
Links to other stuff
**Save 10% off your Coax order at ABR Industries. Use code K8MRD10 at checkout.
abrind.com/?sld=2
The SkyHook Portable Mast Antenna Mount (non affiliate)
www.thehamstop....
Use code K8MRDRADIO for 20% off
Save 5% Off At Gigaparts With Code K8MRD:
www.gigaparts....
Save 10 % off Messi & Paoloni & ABR Industries Coax With Code MP10 www.gigaparts....
10% off Messi & Paoloni Coax
Use code K8MRD for 10% off.
messi.it. (or you can order from Gigaparts)
Signal Stuff Signal Stick Antennas:
BNC Antenna: signalstuff.co...
SMA Female Antenna: signalstuff.co...
SMA Male Antenna: signalstuff.co...
Signalstuff Antennas: signalstuff.co...
~~~$15 off most purchases over $65 at Radioddity:
radioddity.refr...
*All Links Are Affiliate Where Possible
#lifepo4 #makerhawk #hamradiotube
Best explanation I have seen and thank you for doing so. As a rc enthusiast and dealing with 6s 6000mah lipos I do wish there was something like this that can balance discharge while monitoring each cell. I bought this unit on Aliexpress and will use it.
That's a cool tool! I bought one in 2021 when I built the 100-Ah LiFePO4 battery for my car. Like you, I tested capacity right away to see if I was getting the advertised spec. Thumbs up there. I do a full capacity test every November to see how much my battery has changed each year. I guess I should share my results when the time comes. 73! -Scott, KE4WMF
Nice review and good job on deciphering the settings. The little white plug on the right puts out 3V when it goes into error, so you could trigger something electronically when it's done.
Now I gotta build a Anderson Powerpole short cable to put on the tester so I can connect batteries to it!
No, you GET to build another Powerpole cable. Just like I did 🤣
I just watched another video about this tester and they maxed it out for an entire test. I guess reading the instructions wasn't their cup of tea. Thanks for this! I used your affiliate link to purchase.
Awesome, thanks so much. Glad you found this helpful.
Thanks for the tutorial. I’ve tried reading the instructions a dozen times and could never grasp what it was trying to state.
Had one of these for a few years, and haven't used in a while. Bought to load test a 12v power supply(matching supply to a Kris CB radio that's also on the project list) that's been on the project list for a long time.
Battery tester space heater combo. Kewl. But holy complicated instructions Batman! Thanks for the demo.
Thanks for this really good video. Can we test multiple individual cells at once?
Mike that's a great tool. Very useful in testing both new and old batteries. Good price as well !
Nice reviews.thanks
Thanks, I just bought this and need to test a 100Ah Lithium Iron RV battery. This device is rated at 150watts (?) but it also says 20A which is 240 watts at 12 volts so how should I set it? I want to draw 20 amps from my battery to test the Amp Hr rating. I guess I'll have to limit it to 12A in order to stay below the 150w heat sink limit. But it starts out at 13+ volts . . . Will this do a constant watt draw or is it limited to a constant amp draw?
This thing looks cool. Never really had a way to test batteries except to see if it would last all night. Lets see if I can smoke it haha.
Fingers crossed!
nice review. I got one with black fan. different brand. but very close to that. same crazy menu. it does get quite warm at near full power. you can do USB C PD testing with a trigger cable. but limit on trigger cable . 73's
That does seem like a great tool to have!
I wonder If you'd be able to supply 20v/5A to that USB-C port using one of those trigger boards.
RIP DenCo prototype batt. We can rebuild him... better, stronger, faster.
Have some of items in your affiliate links in my cart. I would like to know if there’s wiring for 12v 100ah to this tester that can also be purchased on Amazon? I’m a bit dunce so any feedback is greatly appreciated.
What are the specs for testing a 12v 100ah sealed lead acid battery?
Anyone know how to hard reset this back to factory specs Mine was working, now can’t get it to adjust down, only counts up. Almost a wonderful thing, not a fan of the one control button.
Any one how to meaussure phone capacity ? Will this tester work or usb loader?
So i picked up this device and it works. So after 15 minutes at 2.0 amp draw on a 24ah battery it shows .77ah does this mean .77x4 AH used = 3.08, what does this mean overall? I am trying to find out if my battery is as good as rated. Do I let this run until I deplete the battery to get the total AH of the battery?
That just means you pulled .77ah out of your battery. That seems weird though. With a 1 amp current draw in 1 hour you should see 1ah has been depleted. A 2 amp current drain in 1 hour should show 2ah depleted. 15 minutes at 2 amps should be .5ah. Did you hold the button down for a few seconds to clear out the screen before you started the test? I wonder if you may have had some data there if you were playing around with it before the test that didn't get reset??
welcome home Mike. Ill reset it and try again.@@hamradiotube
So Mike, what did the POWERDRIVE 20ah battery actually supply in Ah? I have something similar and got 6ah out if it. Those chinese manufactures just slap on any label they want.
I haven't fully tested that yet but i've had it for a couple years and have charged many things off of it. I would guess I get what it's rated for.
wish this had an Andersonpowerpole interface, another cable to make up 😮
Another cable you GET to make up 🤣
@@hamradiotube true, with enough practice I’ll actually be able to do that right the first time 😀
Link doesn’t work
Need to get a case 3d printed for it 73
STOP finding more shit for me to buy! I don't need it . . . so, yes, I bought it! Can I send you the bill?
I will not!!
At least he didn't say no to letting you send him the bill. Of course getting Mike to pay it is a whole other thing.