Brake Pads & Rotors Replacement - 2011-2018 DODGE DURANGO / Jeep Grand Cherokee

Sdílet
Vložit
  • čas přidán 25. 07. 2024
  • Pulsing brake pedal, Vibrating steering wheel coming to a stop? - NO PROBLEM, see how to swap your rotors and pads.
    HEADLIGHT LED Bulb upgrade - MUST WATCH: • LED Headlight Bulb Upg...
  • Auta a dopravní prostředky

Komentáře • 53

  • @4life89broncos
    @4life89broncos Před rokem

    Thanks for the great info. I’m ready for a brake job this weekend. You’ve always been spot on, used your videos to change turn signal lights, head lights and fog lights. Brakes are next.

  • @emkopool8683
    @emkopool8683 Před 2 lety +1

    Just changed my rotors and brake pads using this video..
    Thank you so much! You saved me tons of money

  • @chriscaz1239
    @chriscaz1239 Před 3 lety +2

    Great video. Glad to see your back. It’s been awhile since you uploaded a video. Keep up the good work.

  • @guywiththeflowerink
    @guywiththeflowerink Před 2 lety +2

    Just did my change bing bang boom 45 min later got it done, thank you sir n you definitely got a sub from me

  • @TheEdshemery
    @TheEdshemery Před 2 lety

    Thanks for sharing. Off to change my brakes 😀

  • @ceskejburan
    @ceskejburan Před rokem

    Nice and easy!! Very good tutorial
    👍👍

  • @CP-qg4ks
    @CP-qg4ks Před měsícem +1

    Thanks I’m going to try to do mine tomorrow on my Durango

    • @SuperPete276
      @SuperPete276  Před měsícem +1

      You can do it!

    • @CP-qg4ks
      @CP-qg4ks Před měsícem

      @@SuperPete276
      Thanks bro! I appreciate that

  • @td1683
    @td1683 Před 3 lety

    I have an Altitude and Durango so I will be saving myself a pile of money when they need new brakes. It’s hard to justify paying a shop $500-$600 to do that job. Thanks for the video!!

    • @SuperPete276
      @SuperPete276  Před 3 lety +1

      Yes sir, you will be mind blown how easy it is to do. Thank you!

  • @bretjordan4745
    @bretjordan4745 Před 2 lety

    Great instructional video!!! Do you have any videos on how to replace the rear shocks on a 2015 dodge dodge sxt?
    Thanks again for your help!

    • @SuperPete276
      @SuperPete276  Před 2 lety

      I had my front shock failed and I just took it to my mechanic, there are some heavy tools involved to undo big bolts and you also need alignment after that because you partially taking a part A arm, I think it was $180 all set and done.

  • @jesusobama6194
    @jesusobama6194 Před 3 lety +2

    Awesome video my brother u are a life saver ❤️

    • @SuperPete276
      @SuperPete276  Před 3 lety +1

      Glad it helps someone. like I told everyone in the video, very easy job, anyone can do it. Dealer probably wants $1K for this work

    • @jesusobama6194
      @jesusobama6194 Před 3 lety

      @@SuperPete276 factsssssssss

  • @davidmitchell9048
    @davidmitchell9048 Před 3 lety +1

    Great Info Thanks!

  • @Bradimus1
    @Bradimus1 Před 3 lety +1

    Cool. I was thinking t doing this myself this summer.

    • @SuperPete276
      @SuperPete276  Před 3 lety +1

      Awesome, here you go, it was very easy one, I did lots of rotors in my life and this car was the easiest by far.

    • @Bradimus1
      @Bradimus1 Před 3 lety

      I haven't done one in like a decade or more. 😂

  • @kalekalenga5271
    @kalekalenga5271 Před 2 lety +1

    If u could make an other video about . How to change transmission fluid on dodge durango. That will be nice

    • @SuperPete276
      @SuperPete276  Před 2 lety +1

      Yes, I need to look in to that.
      Even tho they say its life time fluid, we know how lifetime go about... Stay tuned

  • @kalekalenga5271
    @kalekalenga5271 Před 2 lety

    Nice video, this will save me some cash. I have to change my rotors and brake pad. Must of strings I replace on my limited model, I do it by watching ur videos. I did the trailer hitch package and wiring. Thank u. I was gona ask. Does it matter if I put the 350 rotors unstead of 330 mm ? Cause I fo lot of tow wt the car.

    • @SuperPete276
      @SuperPete276  Před 2 lety +1

      Appreciate your support. NO, you can't put larger or smaller rotor on existing setup, it will not fit in the existing caliper, to upgrade you need to change entire break system, rotor/caliper.

    • @kalekalenga5271
      @kalekalenga5271 Před 2 lety +1

      @@SuperPete276 thank u very much.

  • @nicholaslewis3376
    @nicholaslewis3376 Před 2 lety

    Thanks for the vid but I got a 2014 Dodge Durango fwd limited which rotors works on mine 350 or 330

    • @SuperPete276
      @SuperPete276  Před 2 lety

      Call dealer with your VIN number they can look it up. Thank you

  • @alexanderbelov4604
    @alexanderbelov4604 Před 3 lety

    Посмотрел видео, мысль..."надо что-то делать!" , встал с дивана, голова закружилась, лег oбратно.

  • @sknowiteproductions
    @sknowiteproductions Před rokem +1

    Do you have disk brakes in the back? How often do you do rear brakes?

  • @eastcoastcars2000
    @eastcoastcars2000 Před rokem

    So for the o-ring did you put that back in with the new rotor or no why did you say to not rip it?

    • @SuperPete276
      @SuperPete276  Před rokem +1

      Yes, need to put it back, I said do not rip it :)

  • @mohamedahmed-en8ps
    @mohamedahmed-en8ps Před 2 lety

    I have Dodge Durango 2011
    I need to know How I adjust the rear parking brake shoe without taking the rotors off?

    • @SuperPete276
      @SuperPete276  Před 2 lety

      You should not need to touch breaks, google how to, its probably done under the dash where you pedal is

    • @mohamedahmed-en8ps
      @mohamedahmed-en8ps Před 2 lety

      Do you have a video to see it?because I push by my fot all the way in to hold the car On hill but the car still moves so I want To adjust the E-parting brake some?

  • @guywiththeflowerink
    @guywiththeflowerink Před 2 lety +1

    Hey! Quick question! Are the rear brakes the same as the front brakes? Or do you need extra tools?

    • @topsykretts747
      @topsykretts747 Před 2 lety

      Same question

    • @guywiththeflowerink
      @guywiththeflowerink Před 2 lety +1

      @@topsykretts747 depending on the model!, I figured it out, but if it’s the same system with the pads as the front then they are done the same way

    • @topsykretts747
      @topsykretts747 Před 2 lety

      I appreciate the insight

  • @hectorcolon1385
    @hectorcolon1385 Před 3 lety

    Can anybody tell me what size of front rotors I need for. 2014 Dodge Durango sxt v6

    • @famfirstalways8051
      @famfirstalways8051 Před 2 lety

      I hade to take mine rotors into the part store there is 3 different sizes.

  • @ignacioh6708
    @ignacioh6708 Před 3 lety

    I changed them new brake pads and they stick with the disc.
    Why does it do that?

    • @SuperPete276
      @SuperPete276  Před 3 lety

      can you explain little more I don't get what you mean stick with the disk

    • @ignacioh6708
      @ignacioh6708 Před 3 lety

      @@SuperPete276 the pad is rubbing with the rotor and both are new

    • @famfirstalways8051
      @famfirstalways8051 Před 2 lety

      Did you do the break in for the rotors and pads.

  • @Bradimus1
    @Bradimus1 Před 3 lety

    You should consider getting a breaker bar for lug nuts. Easier on your ratchet.

    • @SuperPete276
      @SuperPete276  Před 3 lety

      I know, because I don't take these wheels off often, factory one worked, but yes, you are correct.

  • @1996ikey
    @1996ikey Před 2 lety

    U use a t55?

    • @wilfredoalta3475
      @wilfredoalta3475 Před 2 lety

      Hey bud… can you show is your lifting points in your Durango? Maybe a video?