Fuelpak FP3 Review
Vložit
- čas přidán 28. 07. 2024
- How to install and tune your motorcycle with the fuelpak fp3 tuner. In this review we will look at the fuelpak fp3 by Vance & Hines. Talk about getting it installed on your bike and flashing a new map. I will discuss the fuelpak fp3 autotune feature and some of the the other features it offers. Hope this video helps you out if you have any questions please leave them in the comments below and I will try to answer them for you. Thanks for watching and please hit the like button and think about subscribing to the channel.
Links
Vance & Hines Fp3 for Harley Iron
amzn.to/2I6XrXU
Full Disclosure this link is attached to my amazon affiliate account which gives me a small commission at no cost to you. Which helps fund this channel. Thank You. - Auta a dopravní prostředky
Saw this video and manybithers and bought one last year for my 18 FLDE. Realized it would void my warranty, returned.
Warranty expired, saw your video AND comments and hyst ordered.
I ride C2C in summer. Temperature is something I suggested to HD instead of a "clock". This is a stellar diagnostic tool!
Yet I hesitated because I didnt want to invite my phone to the HD party.
The canned map is all I need for peace of mind (for now).
Great review, great tribe in comments.
Thank you for telling me it can be used for 1200 conversion I want to do one and now know I’ll have something to do it with
Nice vid. Highly recommend the fuelpak, im a fp3 in my 2017 XL1200X with Vance hines short shots full exh, joker high flow intake. It made a huge difference since the bike comes stock lean. The Autotune was even better for me
Nice set up autotune can make a big difference with certain setups
Tony's Garage thanks. Your other video helped me conquer and have success with autotune.
More to it after flashing the first time. You do have to switch off your bike. (Power switch not your engine kill switch on the bars) and the app will instruct you to turn it back on after 15 seconds. This is to save the mapping to the ECU.
Yes
Thanks
Thanks for watching ride safe!
Hmmm. Question for you. I bought my FLSTC used. It has high flow pipes, but I do not know the manufacturer. Will that affect the mapping?
It will, they will have generic map for high flow. After that you may need to run auto tune to dial it in.
Anybody know how to get around california carb laws as far as shipping for products like these ?
After 3 SERT’s my dealer is trying get me on to this for my next bike. Does it do AFR / Timming / Throttle response and everything else the SERT did?
Yes, but it all has to be manually through a tablet or smart phone so a little tedious.
Does it have a setting for rc components exhaust and one for a stock catless headpipe ?
They do not have RC but I put in generic with a high flow air filter. It had a map and I flashed it to my bike. Worked good.
I have a 2016 Harley Forty Eight 1200 with Short Shots V&H pipes, a breather and the FP3... it runs "jerky" below 2800 rpm... even after the V&H support sent me a map.... Someone recommended to go the Micro EFI Dynojet route as this will eliminate the O2 sensor closed loop that causes the jerky ride in the lower rpm range... Can I get rid of the jerky ride by sticking with the FP3 and more tuning? Can the FP3 also eliminate the O2 sensors?? Very irritated by the uneven lower rpm issue...
Did you mess with any of the other settings it's not try tricking it and customizing make it run a little leaner just so you know 1200 sporty are very jerky then why would run so much better with a danmoto 2 into 1
@@jimregal928 The only entities that "messed" with the settings were V&H.... They know that a lot of their pipes are no good apart from looking good.
Would you notice a difference and how much of a difference would the tuner make with a new breather and mufflers? Thanks
Depends on the parts installed usually about 10 hp or so.
Hi Tony - By chance, did you compare the fp3 v the Dynojet Power Vision? Many Thx
No, I didn’t sorry.
Many thx again!
Can I use this with stage 1 screaming eagle air intake and steaming eagle 4 inch slip ones
Thanks for info.
That would be perfect don’t forget to tune.
Tony Cox thank you sir happy dads day
"Steaming" eagle LOL!
Hello Tony, I have a HD Softail Heritage 2008, and here in Brazil our fuel is not so pure as in USA, that's why the temperature of the bike becomes very high sometimes, and I am looking for some tuning to improve that and also maybe gain an extra horse power.
Do you think the FP3 will help me? I will add a high air flow filter, and already have an exhaust with high air flow too.
How is the performance of your bike after the FP3 installed, please? Tks!
+Arnaldo Toledo it should run alot better getting the air/fuel mixture where it needs to be. Harley come very lean from the manufacturer for emissions. Should run cooler also. Good luck and ride safe.
Many Thanks Tony!
I hope you don,t have issues with it . my experience with v&h was absolute shit . It took them over two months to get me my initial map to last less than a week when it failed . It left me stranded on the highway , had to remove it to get home . EIGHT MONTHS later , still no response from them .At this point they probably have no interest in making it right .
I also has a similar experience
It will handle a Stage 4 110 on a Harley Davidson Touring ..did it this past summer >>>
Frank McGrath I have a 107m8 bumped up to a 124 with cam intake full exhaust and many other oil clutch breather mods the fuel pak works great for at home tuning
Hello sir, I have a 2008 dyna street bob. I noticed for the fit guide that it's a 4 pin connection and I have 3 pins. Will that be an issue? Thanks
I would go with whatever Vance & Hines recommends for your bike. Thanks for watching!
Yes they come in 4 and 6 pin but I think your 3 pins has a blank for the 4th spot.
After you get the map that you want do you remove the tuner from the bike and put it up or does it have to stay connected ?
I took mine off and keep it stashed with extra parts. If it gets stolen you’re screwed
I have a 2015 Harley low rider and was wondering if I put in the Vance & Hines Fuel pak would that void my factory warranty?
Depends on the dealer... most will honor it with basic upgrades like exh and air cleaner and a few other things ... if they don't, tell them straight that you won't do any more business with them.
@Life Behind Bars I changed my pipes to V&H slip ons and the dealership where I bought the bike said that voided my 2 year factory warranty?
All dealers are different. Mine you can add any exhaust with no loss but as soon as you map the bike with anything other than the Harley tuner the warranty is gone.
@@TonysGarage haven't mapped it yet that's why I was looking at your video getting ready to change the filter then map it dealer doesn't do it anymore.
@@TonysGarage I love how I just watched a H-D Dealer post a video of them doing a stage 4 upgrade and he takes the brand new bike out, getting on it showing off all of the upgrades, then back to the showroom to sell, and that's all OK... but I plug a tuner into my bike to make it run better with slipons and it voids my warranty.
Need one for 2005 Sportster 1200xl but I couldn’t find it on Amazon, any suggestions?
Try get lowered cycles! Get lowered.com. Thanks for watching
www.getlowered.com
Can the tuner be used on different models or is it dedicated to one bike ..please
It’s “married” to the bike when you flash your first map.
Good review,,, is the fuelpack better than the tts to used on a 120 R harley engine
While the same they are completely different. TTS really need to go on a dyno. Fuelpak is user friendly and works well with can maps. You will not get the hp out of can map like you will on a dyno.
@@TonysGarage i bought a 120 R for a 2013 fatboy,,, previously in was running a 103 stage 4 kit HD,, SO the dealer master tech tuned the 120 R with fp3 not a problem,, but when i bought the engine they recommend the tts,,, that is why i am asking is it will gain more with tts or v&h,? ,, they d not have the dyno equipment
Harley is going to recommend the tts because it’s their product and keeps the warrenty in place. The FP3 will void you’re factory warrenty. The tts keeps the bike within epa standards the fp3 does not.
So in really both with a dyno tune should be pretty close to the same the fp3 will run a little richer and cooler because it does not have to stay in the epa standards.
@@TonysGarage good to know,,, thk u for your recommendations,, that is the tech support that all bikers need
Once a fuelpak is married or flashed to one bike can i put that same fuelpak on another bike use permanently. I see a few of this paks being sold for cheap thats why im asking. Thank you for this great video
No sir, once it is flashed to a bike it cannot be used on another.
@@TonysGarage Thank you
U can’t make adjustments But it can be used to read and monitor gauges
Can I use this video for 2 brothers exhaust and a 2018 Street Bob?
I know the 2018 street bob is fine not sure about the 2 brother exhaust. You can always use a similar exhaust profile and do a couple of autotunes and you will be golden. Ride safe.
Awesome thanks save some money from having harley do all this!!! Will this void the warranty from H.D.?
Yes, but not the entire Warrenty. Example my fuel pump went out and it was still covered.
Thanks!!!
Ordered my van hines short shots. Will be awhile till I get the FP3. Will the hog be OK with just my pipes on and stock air intake. I was thinking the o2 sensor would adjust for the new pipes , but don't want to damage anything?
Definitely
Should I keep it or remove it after mapping ?
I kept the old maps just incase
Hi, if i just upgrade my sportster XL 1200 T 2017 with an air filter Arlen Ness Big Sucker, does it make sense to use FP3 and what is the gain for power ?
Yes, you will need to tune the bike. The engine is getting a lot more air and not enough fuel. With a complete stage one air cleaner and exhaust and proper tune anywhere from 10 to 15 percent over stock. It will very depending on the parts you choose. Ride safe!
@@TonysGarage Thanks Tony, but if I keep the standard exhaust (I like my neighbors :)), is the engine works better with only the new performance air filter and FP3 auto tune?
Yes sir, the air cleaner with a tune will richen the bike up. It will run stronger and cooler
@@TonysGaragegood news for me Tony, because I think that in Europa the mixture of fuel and air seems to be very low in fuel and the engine is not flexible below 2000 rpm and it heats a lot. Anyway D are the better motorcycle i like.
can the FP3 be left plugged in the bike 24/7
Yup 👍
Hi Tony, I just changed my 2018 Road glide muffler to CFR and upgrade to SE air filter. Do FP3 work for my bike? Also I got advise from local dealer here to use super tuner since they found some problem on ECM from other bike after FP installation.
Fp3 will work fine. I have had zero problems with it on both of my bikes. It will void you’re Harley warrenty once you use it. The dealers all push the super tuner cause it’s a Harley product. Funny thing is that before the super tuner was released they all used fp3s🤣🤣. Ride safe
Thank you Tony. 👍🏽
That's funny, pulls the tuner out of the box like it's new but looks like it's been on the bike for a couple of years. lol
Sad Vance & Hines doesn’t include anything for Rinehart Exhaust. Not everybody wants Vance & Hines Exhaust so I guess I will buy a Dynojet or ThunderMax which are capable of a lot more things.
It doesn't matter what exhaust you have on your bike, I usually create three different Maps with different exhaust choices and I never have a problem. I was running thunderheader on my Dyna Low Rider s model I could not believe the power that thing made.
Email or call V&H tech support
They will configure a map and send it to you to download.
Just finished my 2019 Road Glide with a Rinehart 2 into 1 ,,, I called Vance & Hines tech support they logged right onto my bike and downloaded a map took less than 5 minutes.
Thanks for the great video Bro... can you set R.P.M.S. my fuel pak is on the way. thanks
Not sure what you mean by R.P.M.S. ?You can change your REV limiter.
Tony Cox can you lower idle
Yes
Tony Cox Thanks Bro much appreciate have a blessed day.
It didn't work at all for me. Had a simple upgrade, even they agreed; but their maps just didn't mix with bike's ECM . Had to do away with new air cleaner and go back to stock.
No thanks. Its too complicated for an old guy like me.
Seriously!? You have dementia do ya pops?? LOL!
@@jonbassett8023. No. I don't have dementia. I'm just not up with this modern technology.