Fastest Way to Get Water - How to JET a Well with Pressure Washer and Connect Pump - Complete Guide
Vložit
- čas přidán 9. 02. 2021
- Fastest Way to Get Water. Use Pressure Washer and Mini Jet to drill the well, Then attach the pump. A Complete Guide . Anyone can do this!
See Also
Fastest way to get water
• Fastest Way to Get Wat...
New Method to drill a well
• Fastest Way To Get Wat...
Watch Live Drill a well in 1 HOUR
Watch Live Stream - Fastest Way to Dig a well.
• Video
Apple Drains Charlotte NC - SUBSCRIBE and Learn
/ @appledrains9189
Watch the NEW Method of Jetting a Well. Just 10 Minutes to WATER!
• Fastest Way To Get Wat...
Also watch for our LIVE BROADCAST Memorial Day Weekend, We will Sink another Well LIVE! Subscribe to get the Notification or Check our Website for the LIVE BROADCAST Schedule. www.AppleDrains.com
Apple Drains South Florida - SUBSCRIBE and Learn
/ @appledrainssouthflori...
NEW Office RALEIGH / DURHAM NORTH CAROLINA
Coming Soon
APPLE DRAINS
Very Complete How to covering all parts of the Rainwater Drainage System. Short and easy to Follow Video
We Wrote The Book on RAINWATER DRAINGE
Apple Drains - Drainage Contractors
Trusted & Recommended
by Your Neighbors
GREAT HOW TO TIPS!
Apple Drains
Drainage Contractors
The Most Trusted Name in Waterproofing
www.AppleDrains.com
Main Office
Orlando Florida
(321) 200-0685
Trusted & Recommended
by Your Neighbors
Get The Help You Need
LIVE HELP
Video Consulting via Skype
Schedule online at
www.appledrains.com/PHP/estima...
Orlando Office
(321) 200-0685
Schedule online
www.appledrains.com/florida
Charlotte NC
(704) 336-9111
Schedule online
www.appledrains.com
Miami FL Office
(786) 228-6835
www.appledrains.com
We Do It Everyday!
Apple Drains, How to install a French Drain, Drain, Yard Drain, backyard sump system
#ShallowWell
#DrillWell
#JetWell
How to, Wet Yard Solution, Apple Drains - Jak na to + styl
Hey Chuck Here with Apple Drains. Watch the NEW Method of Jetting a Well. Minutes to WATER!
czcams.com/video/nhqOmrMTfoo/video.html
Also watch for our LIVE BROADCAST Memorial Day Weekend, We will Sink another Well LIVE! Subscribe to get the Notification or Check our Website for the LIVE BROADCAST Schedule. www.AppleDrains.com
It looks like you're in Florida area. If you're in Florida I'll pay you to drill me a well
Now this is good clean livin right here! THIS is what CZcams was made for! Not these 30 second TikTok BS videos!
It would sure be nice if you'd keep your opinion internalized.
Most guys in that country know nothing about how to live a decent life from nature. They tend to take advantage from people, like women, and believe they're really smart.
@@crazypeoplearoundtheworld304 thats a two way street there bud
@@johnwatson6876 What language do you speak so that you can be silenced properly?
@@crazypeoplearoundtheworld304 ask your old lady she can tell you
Growing up I had a well on our property and I can say there is nothing like drinking from the hose after riding our dirt bikes all day and having that clean dam near freezing water as much as you can want! The good old days LoL
I discovered this phenomenon on my own when I was about 6-7 years old. I would turn the garden hose on and just start pushing the end into the ground. Then, one day, I guess I pushed it a little too far and the ground "grabbed a hold" of the hose. My Dad came out and asked me, "How the heck did you manage that?!" He was furious! I mean, at least he could've admired my ingenuity, but nope. I just got grounded. Oh well. "Oh WELL"
Get the hose outta there? Or lose it? Funny story. Similar thing happened to me. Only I cut the hose low as I could, and disposed of the remnants in the Neihbor trash can. Lol never got caught. 😊
You can hook a water hose to pipe and use the water to jet under the driveway to get water on the other side just dig a ditch first to lay the first 10 feet in hell you need to bury the pipe anyway
Yep some parents don't recognize the genius in the mischief kids create lol
HAHAHAHAHAHA...YUP...I LEARNED PLAYING IN WATER AND DIRT...I SAW IN A VERY SMALL SCALE HOW FLOOD WATERS COVERED AND MOVED SOIL...LATER I LEARNED OF A BIBLICAL FLOOD....IT MATCHES...
@@jamesaardemajr.9703 Oh James...so SNEEKY...😉🙃
"If you believe you can do something, I guarantee you can do it." Good parting words. Here in the Hiroshima countryside, I was just quoted over $16,000 USD for a new, full-sized, traditional style well. They said my old well is "dry" and haven't given me any other options. Considering that I have a large property in the country without any underground cables, pipes, etc, I thought "I can just put my own well in." Seeing your video and others on CZcams has shown me that it is definitely doable. Thank you!
Great video! I should have drilled a well 20 years ago knowing how simple it is to do. Thanks for the knowledge.
Great video! As others said, this is what utube is all about, learning how to do something constructive.
You tube is the best. I need a well n New mexico. I don’t know ,if this technique will work
My friend couldn't afford to pay his water bill, so I sent him a "get well soon" card ... I'll send him your video too, thank you
I had a similar project. I used the ladder as a gantry (A frame) and used a com-a-long from the top of the ladder to the pipe wrench. A lot easier, in my application, with the ratcheting come a long
As a roughneck soon to leave the rig I can appreciate this. You did a terrific job.
Liar
What if oil starts coming up...what do you do then? Load up the truck and move Beverly Hills? 😄
call cousin Pearl!
Black gold. Texas tea.
You shut everything down and call EPA or DEQ then plan on spending big bucks for clean up because you won't own the oil or mineral rights. I hear Klaus owns them now. I can't believe they let us have water rights.
Please don't forget granny
I was going to suggest you immediately dig another two dozen or so and not say a word....................
Your a genius. Thank you for showing this well drilling method! 36 feet! Incredible!
Good for you to explain all of that to us. I yes to do construction when I was 16 in the late 70's I missed my calling, I would have loved to do landscaping now and gardening of course. My skills only get better with your info thanks.
One good thing about living in N.C.,, we have the best tasting, crystal clear, clean, well water...
Great Video! CZcams suggested it to me at 11:20pm while I was watching family feud, but it was definitely a great suggestion
I love this. Thanks for making this video. Water self-sufficiency is critical.
120 feet of stone here. I give the jetting time, about 10 years.
Lol, I relate. I run into a bed of caliche 6 inches down.... Reminds me of an aluminum bat against a concrete mailbox (misspent youth. Don't judge me)!!!
You just gotta belive you can do it in 5 years.
Add grit to the pressure washer fluid (after the pump of course), and you can cut rock.
I was wondering about this. I have family in west Texas and South Central Tennessee and neither are like the soil we have in Michigan.
@@YodaWhat or higher pressure
This was just the inspiration I needed to drill a well! Cross your fingers for good clean water the family needs it!
You get that well goin?
I like your state " if you believe in something, you can do it" thank you so much for posting great 👍videos
Your videos helped me put my own french drain in.. Sincerely, Thank you Chuck
That was great. Mission accomplished.
This is basically how I thought to do this but I didn't know about using the different diameter of pipes. Thanks for sharing 💪
Great positivity. Liked the way you were happy even when you were struggling.
Looks like Florida. Same process I used 20 years ago to make a well on my lot. Went down to rock then used the Bobcat and auger to penetrate the rocks. In Hendry County the sand is often over limestone layers but if you hit one it's a great part to end your well once you penetrate. In southeast Florida you can simply pound a steel pipe in the coral rock. Removing pipe is easy with a skid steer and a flat belt (timing belt) wrapped around the pipe and lifting it.
Did you go through the limestone or stop there?
Same with my dad almost 25 yrs ago. We hit limestone at 27 feet and stopped. Excellent water for irrigation full of iron. Best lawn on our street back then. SW fla ¼ mile from intracoastal.
Lol, those bushes surely give it away. SW here
Looks like the Eustis neighborhood, although Ocala has MANY lots that look like that! Saying Hi from Crystal River!
@@flaplaya 😮
I did what you did about 5 or 6 years ago; I drilled 30' down for about a week of messing around, with a 2" semi-trash pump, and installed a hand pump at the first water table, which is only about 15' down for me. I have an exact replica of that pump and pressure tank system you've too, but it is going on 2 years old and still in storage for backup on our other system. We use a different pump and cisterns top of a hill.
Nice video, I am about to check out your solar panel video (we have solar panels too), I had been watching you before on your con research wall surfacing and didn't know you expanded into off-grid.
Cheers from East Texas.
Where in East Texas? Curious as I planned to dig one in Hardin County
@@susanconklin4945 Anderson Co. But if u have a lake or other surface water close by, then ur water table is close to that level.
I'd like to see Drain Addict use the drain cleaning pressure attachments he uses to try this. Those things cut out roots from pipes and would be interesting to see how well they could dig a well.
I learned from experience,
To give a fitting a 1/4" turn so it sets just right!
Did this in northern hemisphere
Thanks 👍
The only way it will work unless the water table is really high.
I’m so glad that you took the time to make this available
To pull up 2" pipe : Half hitch a nylon tie strap around pipe and loop the other end around a 42" farm jack. Works great for small trees and fence posts too! 👍
Trying that now on a stubborn fencing T-Post, used a heavy chain and the chain broke! Going to try climbers nylon webbing -- if that wont work ill try water pressure. Water pressure can cut steel.
I dream to have all the knowledge you possess one day. I don’t know if I’ll ever need this well but thus video was amazing. So much detail but still easy to understand.
The day you need this is the day you won't be able to get the supplies needed to do so
Want Is what keeps us alive. The day we no longer wish, dream or want, it's the end of It all. Life Is good even if we don't get all we want. I hpoe you get your well some day, dough.
What I'm saying is, make it happen and by all means keep dreaming and planning, but strive to make the dreams and plans manifest into reality. 👍 ✌️
Awesome video I've always wanted a well in the backyard my build told me years ago that a creek bed ran back there
As a professional driller and holder of several U.S. patents I can tell you how to make your drill even faster and much easier. In effect, all you have to do is build a jetting screen. You can take the well points you already have and remove the check valve from the top of the screen and move it to the bottom of the screen. That is an old process that has been used for 50 or more years. You can buy one already made if you wish. Then use your process without the need for the casing or other tools and connect it to your jetting pump. I have installed thousands of jetted wells using this method. Usually I jetted with a "jetting pump" not the small centrifugal pump you are using. It will work with your pump though. In some areas of Florida, you will encounter coral rock and your process will not work. In other areas your pump will not put out enough volume and you will lock your drill stem up in sand and gravel. Every method of drilling must be matched to the location where you are wanting a well. Your system will not work without at least a 100 hp jetting motor in dense clay or in areas of large gravel.
I hope this helps you in your drilling venture. Your system will in fact be great for a large portion of people that are not looking for a professional quality well. If the idea is to risk a little money to get water, then it will fill the market. Thanks for your video.
The well should of had the 2” line removed and some holes drilled in the bottom 5’ or so and then put back in to make a casing for the well to keep the sand from collapsing in on the 1” well pipe the the 1” should be lifted of the bottom a couple of feet so it won’t sand off over time
Yes these shallow wells in Florida can sand up over time. So: 1) No reason to pull the 2 inch out . Why not drill the holes in the two inch 5 inch up when you use the two inch pipe. The only reason this would not work is - you do not have enough water jet volume or pressure. However by using a mud pump you can achieve it no problem. Just cut off the 2 inch pipe- why not
Just so you know... Running the pump at 220v cost the same as 120v. 22o uses half the current (Amps) as the 110, but it's twice the volts. So the Wattage is the same, which is why they charge us by the Watt/hour. P=V(A)
Shew! Thank you.
watt x hr. not watt/hr is what you probably meant😊
Ok loved the technique of diging a well with hi pressure gun. Never thought of using my hi pressure washer. Thanks
Only thing I needed to know thank you sir you are the best......so simple and effective!
Wow, how interesting, I'm gonna have to try that! I would like to of seen the complete time lapse video from the very beginning to the very end, without skipping anything though.
Absolutely brilliant, ta mate- I've learned a lot from your channel that has helped me quite a bit with drainage problems!
Looking forward to following this process.
Thanks for the video.
Im about to do a wash in sandpoint for a customer and will be using a pvc style with a nozzle that adds to the tip. The nozzle has a check valve plus a 1” threaded connection inside the sand point for a barbed adapter to lightly thread into which will have a 1” rigid water line connected to my 2” water pump. Once the sand point is jetted in the barbed adapter is unthreaded via the rigid 1” line that was just used to wash it in. The check valve in the flushing nozzle tip of the sandpoint will be closed once flushing is stopped (its only job is for setting the sandpoint). Once the 1” flush line is removed from inside the 2” I will connect the 2” to the line to the pump in the house with a check valve inline and done. Water on.
That’s the plan, let’s hope it goes as planned. Haha
Works great for removing bushes as well. No need for shovel or pick. Just jet the dirt away from the root ball and throw the whole thing away.
how they mine for gold and diamonds in africa.
I just did that to a 60 year old shrub in front of my house. Worked great.
Hey! That's a really smart application for this trick!
I have been putting wells in for more than 40 years and this is the most difficult way to put a well in i have ever seen a lot of easier ways of doing it
We all wait impatiently for "your" video.
Sure, there are easier ways - and how many $$$$$ worth of equipment are required?
I stumbled on to your video but I am very glad I did as this is a great idea and I have a pressure washer and jet already. I need to replace my well point and was looking for an easier way than pounding one in. This method most likely won't work in areas where there is a lot of rock but my cottage is across the street from a lake where the soil is sand and loose clay so this should work great. Thanks for posting this
Great Job..... Thanks for sharing
One recommendation is for the two inch once in the mud and sand use a perforated casing to make bailing or jetting easier when the well point get sanded in. Just my experience.
You rock sir, thank you for sharing and have a great day.
Hi Rosemary
I have the exact same Predator pump. It's worked great for a couple of years now. I start it up without the choke. The only time that I needed to choke it was in the winter when it's stupid cold outside.
I watched you make your home well and your B&B mini’s well. I love your good outdoorsy attitude. I’m going to do this myself. Thank you
CZcams algorithms are on point atm. What an amazing video, so concise, so informative. Feel like this is going to be my next project. Have subed to your channel 👍
I'm getting ready to do my own well for an off grid place
That was interesting.
Suprisingly simple.
Thanks !!
By far the most informative video so far. Thanks.
Loved this video and you sir sound like a person I could hang to talk about ideas
Good work and teaching you are giving, thanks and stay healthy.
Great demonstration. Thank you brother
Excellent! I like your video
Nice job. Thanks for sharing. I would suggest using male threaded adapters and female adaptors in place of the couplings on both the 2" to make it easier to pull 10' sections back out and also on the 1" in case you ever need to replace the check valve. Also if you have access to an engine puller, that really helps in pulling the 2" back up.
Awesome, glad it all worked out. Great videos Chuck!
Thank you for sharing your experience. I don't have water in my place, but I can't offer it to much money for me. I'm going to trying to make well by myself the way you're doing. Thank you.
Chuck I'm totally blown away by what you were able to do. It's definitely a two to three month project and if you've got the patience it's definitely worth it.
I like the way you explain in great detail how to start an engine. Because people who don’t know how to do that should definitely be undertaking a project like this. /sarc
Always gotta be one of you people out there that just has to get your rude comment in ... the fact that you zero in on such a petty little detail just says you're looking for something to be a prick about... what are you a teenager? You are the one watching him for information. You have alot to learn from this man besides the subject at hand you have a big leap before you reach any level of respect in his class. It's not common these days to see people like him that are genuine and know who they are. He is his own character... secure... giving his time to help people... then somebody like you had to come up and say something stupid about something stupid to pick on his character.
God gives us the freedom to be who we want to be... we either follow him and seek understanding and righteousness or we don't and are therefore useless and destructive... to be cast out...
Ones that do find their way to call upon the name of the Lord... He changes hearts... gives wisdom liberally for good and charity... there is no other name under Heaven given among men whereby we must be saved and His name is Jesus.
@@michakibler6730 Woah!! LOL You have the perfect defense against being made fun of! "God Said Quit It!!" HA HA HA HA HA (cough) ha.
@@michakibler6730 So basically, God says I suck. Got it. lol
Look at it as quick refresher info. And, when did sarcasm really help anyone? That's sort of negativity just feeds into a shame-based society, keeping the people you like to taunt ignorant, uninformed and incapable so you can taunt them further. What Chuck is trying to do is put The cookies on the bottom shelf 😅. Thanks Chuck!
@@RJCooper2 LOL, and this somehow negates the clear truth of what I said? Hint: No, it doesn't. I mean it's commendable on some level that you come to the defense of your fellow morons, but that too does not reduce the truth of my comment. Sorry! :-)
Thank you for sharing. I love the way you did your video. Nice and easy for beginners
chuck thank you for sharing this valuable video.
Very pleased to view this complete comprehensive presentation. Everything I anticipated was thoroughly and casually explained. I will now proceed with my own well with more confidence.
Nice, I don't even need a well, but it's nice to learn how things are done from someone who knows what they're doing!
I NEVER KNEW THIS PROCESS. IT SEEMS THIS IS MOSTLY SAND.. WHAT ABOUT ROCKY SOILS.. YOU'LL NEED HEAVIER DUTY MECHANISMS WON'T YOU? JUST ASKING. ALOT OF "KNOW-IT-ALLS" IN THE COMMENTS. ESPECIALLY WHEN U MIXED UP THE WIRING STATEMENT YOU PROBABLY MEANT TO SAY:"**Black is hot on 110 and 220 and white is ALWAYS the neutral in a 110 volt circuit." BUT MOST VIEWERS KNOW U R NOT IN AUSTRALIA.. SO THAT'S A NON-ISSUE. TY FOR SHARING THIS METHOD. RESPECT. Sis MargoKansas City
This guy dont know much. Just monkey see monkey do.
I don't need well water to drink but I came because I want to add geothermal cooling to my home. Ground water below six feet is a constant 55 degrees and can be used for free/cheap Air Conditioning. Pump it up and let gravity return it near the top of the well and it will naturally recirculate. Then pump it through an A/C coil in your furnace. When your A/C thermostat calls for cooling, it turns on a pump instead of the normal condenser which uses a ton of electricity. If one well is not enough, place a second well 12 feet away and have valves switch them out by temperature automatically so you always have cold water.
WOOO I'm gonna dig 100 of em now. Thanks!
Thanks for all the tips. Great video
You are a wizard when it comes to water. Did you create that well just for the yard? Could this not be a water source for the house?
I had no idea what this was about, but its quite interesting, and I think I've actually learned something from it
To build anything in Florida commercial construction companies just an air jet nozzle on the end of pipe, then add a suction pump to drain the area of water where they plan to dig.
Great skill! Thank you.
Congratulations!
Thank you!
This is a good way to contaminate the well water or aquifer
Yeah, no mention of grouting.
I have used a chain, cinder block and a board to pull well pipe with the teeter totter method.
Very good information and a good presentation thank you so I decide to do a well I'm going to do it exactly like you did a great job
Helpful educational video. Thanks!
I wish that method would work where I am, here the ground is extremely rocky even though in most places the water table isn't that deep. Drilling wells or digging is almost the only way to go
2:13 The real reason i came to watch. 😍😍😍
Oh, God Bless You, Sir!!!
Thankyou Soooo Verrry Kindly!!!
Love,
Light
And
Great Blessings
To You
And
All You Love!!!
wish you were up here in Kentucky, know anyone up here. I need one for my and my service dogs survival. tc
Interesting use of the drain snake on the pressure washer. I've used my PW to install a large number of metposts (3 or 4ft metal stake which you would normally hammer into the ground whilst trying to keep them vertical in 2 planes!) Using just my PW, I can build a simple jig to keep the jet perfectly vertical whilst I bore a 4ft hole in less than a minute. The metpost then simply pushes into the muddy hole. With the 4x4 posts, that last few inches of metpost is persuaded in by simply standing on it!
I managed to sink a 12' scaffold pole using the same method, the PW created the first 4' whilst the toothed edge I created managed to dig the rest using a simple oil filter removal chain (I didn't have a large enough stilsons / monkey wrench to grip the pole). Just wish I had known that my drain snake would've worked.
Here in Florida, on the barrier islands, the wells have a decent natural pressure. Not enough to spin a sprinkler, but good for drip. Can't drink it though.
@@KB-pk8cn just make sure you empty the barrels weekly, i think you should be good.
Thank you sir! Much appreciated, God bless you and yours
Great video thanks
Neat! But pipe is a one way street, no way it's going down and back up the same pipe. Think about it, you'd never push water back up a water hose while it's running.
I think it was going down through the smaller pipe
That's all I could think of, but there was no information on how the u bend pipe assembly was built
Your electrical cost is the same on 110v or 220v. The only difference is the amperage draw is l/2 on the 220v. There you can save on using a smaller gauge of wire depending on the load. Volts x Amps = Kilowatts is what you pay your bill on. Kilowatts is the same for both voltages.
Depending on distance from electrical source there could be more of a voltage drop on 120v vs 220v thereby causing volts to drop and amps to rise causing motor to accomplish less work and shorten its life.
Lower voltage is more amps and amps is heat. Heat is wasted energy in this pumps case.
@@jcook3707 The longer the wire the resistance goes up which creates a voltage drop on the wire which will be heat or energy loss. Amp stays the same. I=V/R. The motor will see a lower voltage which could damage it since the resistance is inversely proportional to voltage. So if you double the voltage and the current is the same you can run a smaller wire because less of a voltage drop.
V x A = W, not kW
V x A ÷ 1000 = kW
Thanks for sharing. Great job.
Chuck you are awesome dude 😎!! You have so many useful how-to videos that help people !!!
Unfortunately where we are in Ontario, Canada there is way too much rock of all sizes left over as the Glaciers melted after the last Ice age or it's thick clay or shale rock.
Great video... I've enjoyed them all and in a few weeks I need to run a French drain or two to stop our yard from flooding everytime we get heavy rain or when the snow melts in the spring.
The Canadian Shield!
harbor freight 180$ gas powered auger to get the hole 8 inch wide by 3-4 feet deep in a matter of minutes,just to get the hole started
post hole diggers for a 3-4 ft hole in less time than the trip to HF
Great job on the detail of everything your doing 👍👍
Thanks for sharing information!
I got one of the worst whippings of my life when I was a kid. I pushed about 12 ft of a brand new 25 ft hose into the ground. My momma cut off a piece of that hose and whoppped me butt good. I survived LOL and never did it again 🤣😂
I wish I had sand.. Northwest Georgia is rocks and clay
Suspect this would struggle in my East Tennessee clay.
@@RupertFoulmouth I'm in northwest GA, pretty sure we got about the same 'soil'
I'm just North in SC, people don't know until they gotta use a pick axe to plant a lilly bulb. Lol
@@adambair4595 You got that right! I had to dig a grave for my old beagle that died, me and my buddy spent an hour with a pickaxe and spade shovel to get 2' deep
@@slowstang88 Feel like Andy Dufrene every weekend. Lol
Thanks for the effort of making the video. It answered a lot of questions. Excellent video.
I live in Portland Oregon metro area. Can’t do wells like that here. There is one area the town of Hillsboro Oregon and many homes in that town have water 2 feet down and many homes have irrigation pump to water their lawns no drinking water. Even during a drought this town has green lawns because of the high ground water. Fun video that is for sharing
David, I put a few wells / bores down in Rverside Drive- Briarwood, Lake Oswego and Johns Landing in 1976 & 77. Was back there a few years ago and saw 1 still inuse.
Water two feet down -- and flooding during heavy rains?
Yah need a high lift jeep jack... I've even used a floor jack but high lifts are better... I can tell you a faster way to sink a well... Use a pressure pump and to sink the initial pipe as far as you can, lower in a small diameter pipe, even a quarter inch will do, attache a compressor with tank, turn on the air in bursts... But don't forget to hang onto the both pipes ... If not you might have to go chase them down as they will fly out of the ground... Anyway the mud, water and stones will fly out as well, also between the burst the remaining water/mud slams back down the pipe and further breaks up the bottom of the well which causes a cavity to further draw water out of increasing the volume of water.
Please make a video of you performing this. Just reading your instructions makes me want to watch. lol
The way you had that tee in the PVC configured with the HF pump there's no way it was doing much down at the bottom of the hole. Water takes the path of least resistance and that's not going down 35' and back up 35' if it can just exit a couple feet from the inlet. You needed to have a catch basin around the 4" pipe and force the water down your 2" "drill stem" while forcing mud and sand out and around the outside of it eventually coming out the top.
ya dont figure that worked.he difnt show it
I was thinking the same thing
He didn't show much of anything really.
exactly. if he was getting any water out of the stand pipe, it was siphoning it out. thats thy the water was so clean, should have been muddy as hell. i dont think he understood that you cannot use a single pipe for supply and discharge at the same time.
@@ttunderbridge5762 Yeah when I saw that I knew it was time to move on.
Outstanding job.
WOW"Absolutely Amazing job! Wow.... Thanks for sharing ! Now I Know how to build my own well... Thank you ❤️
Can you do that personally
Great idea you had there. I’m sure it was a lot of hard work physically. Nice one.
On another note, I use a jetter almost daily and I’m pretty sure if a different nozzle was used time could of been saved, not a cheap nozzle by any means.
Do you mind explaining in detail what other nozzle I could use? I am going to try this next weekend and every little bit of help is appreciated. 😊🌷🌞🌸
@@sarramiller976 sure it’s a mustang jetEx nozzle from the jetters edge
@@sarramiller976 unless you live in ann area that has a shallow water table, and nothing but sand soil this "method" WILL NOT work!