Clutch Installation Phantom F12 [ Installazione Frizione Phantom F12]
Vložit
- čas přidán 27. 08. 2024
- I installed a new clutch for the F12. Those red springs are extremely rigid and their process of installation required a brutal strength to pull them.
At the end when I put everything to the cvt, the wheel couldn't spin when I opened the throttle.
Later on I removed the clutch off camera and replaced the 3 red springs with 3 yellow that worked perfect for the moped.
Enjoy watching the video and subscribe for more.
°Link of the clutch:shop.biollamot...
°Link of the little
springs:www.amazon.it/...
°Link of the contrast spring:shop.biollamot...
°Link of the rollers: shop.biollamot...
●Music credit: Wonder Why - TrackTribe
•📸 Instagram: AK_Gyamfi_Mods
•Facebook: / ak.gyamfimods
•Email: ghedawolf@yahoo.it
■WARNING: I'm just a normal guy that have a passion of making an interesting mods and repairs on my car and motorbike. If you rely on the information in this video, you are responsible for the results. Have fun and remember that every project you try is at your own RISK.
Stiff clutch springs are always fun to fit.
Where is the fun? It was a pain in the ass installing those red springs that barely move the scooter.
grazie per il tuo contributo video. utile. il tuo phantom è un 100 o un 50cc?
Era un 50cc ma adesso monta un 75cc. Grazie man!
What size of spocket did you use to undo the clutch to change the spring?
If you mean the big socket to undo the clutch it's 41mm I used.