The motor is a d16y7 and decided to put a y8 manifold it pulls harder and feels stronger. No one had a video on how to do it so here's one hope you enjoy leave a like and subscribe!
Same here bro lol sadly this cars gone now and now I will update you guys on the new project 2018 Honda Civic Si I’ve done shit ton of mods but haven’t uploaded yet..
I have a issue with my d16y7, I recently swapped the intake manifold and throttle body, on my civic now my check engine light is on because of the idle control valve, can I use a y8 idle control valve.
Why couldn’t you use a y8 hole set up on the motor ? Also does anyone know if I put this on a y1 head on a y4 block does anyone know if I’ll run into many issues
+mary cisneros is it all sealed up properly ? No left over gasket? I had the same issue but mine was coolant and make sure the IAC is connected and cleaned they often get stuck open, I cleaned mine with carb cleaner, hope this helps!!
i have a problem on my 1999 honda civic lx it wont start .. i need to clean the water inside the intake manifold to start the car idont no what were is the leak where is the water or the or the oil coming from i need help thanks
maybe you connected the intake manifold with the cooling system. i heard those can easy be swapped or mistaken to plugged in in the wrong connection. Check all your connections if they are plugged in right in the manifold.
Good job man. Wow what a huge difference that made. Thumbs up
I like that I didn't know you could actually do that I'm finding more and more abut hondas all the time
Same here bro lol sadly this cars gone now and now I will update you guys on the new project 2018 Honda Civic Si I’ve done shit ton of mods but haven’t uploaded yet..
hay bro can u explain the hose an exact location where to put them at like a little more light on the video appreciate it thanks man
A6 cam would help, maybe a high comp Y8 minime
Does everything just olig right back up or do you have to cut wires and stuff
I have a issue with my d16y7, I recently swapped the intake manifold and throttle body, on my civic now my check engine light is on because of the idle control valve, can I use a y8 idle control valve.
Why couldn’t you use a y8 hole set up on the motor ? Also does anyone know if I put this on a y1 head on a y4 block does anyone know if I’ll run into many issues
I did mini me i ported a y7 intake I had laying around works better that a regular y8
What do you mean y7 intake ???
Got the y8 manifold on my d15b and I got an idling problem idk what’s wrong 😩
+mary cisneros is it all sealed up properly ? No left over gasket? I had the same issue but mine was coolant and make sure the IAC is connected and cleaned they often get stuck open, I cleaned mine with carb cleaner, hope this helps!!
Relentless Media that makes so much sense I’ll look into that right away thank you
what hoses did u put where and cap off
+Keoni Ka none of them were capped they all went to their spot either on the new manifold or throttle body I just extended them.
Wat hose you use to extend them ?
Alejandro Barocio 5/16 8mm 10 feet for coolant lines.
hey bro what manifold bracket did u use on??
I made a custom one lol I got a piece of a used tire and found a metal piece then just drilled the holes to bolt up to the manifold and it worked.
so d16y8 manifold bracket cant be use it right?
Do you have to chip the ecu when you do this swap?
No
Only when you do the Vtec Head Mini Me swap I guess
You cut the black jacket off the wire to separate them so the clips will reach the injectors? Mine are to short
+Jose Grimaldo yes I did
was the power increase noticable?
Frank torque is noticeable in this swap
and how u block. the thing on the back
+xavier vanga made a custom bracket but failed a week after so I got a iac from the same manifold and put is as a dummy
i have a problem on my 1999 honda civic lx it wont start .. i need to clean the water inside the intake manifold to start the car idont no what were is the leak where is the water or the or the oil coming from i need help thanks
maybe you connected the intake manifold with the cooling system. i heard those can easy be swapped or mistaken to plugged in in the wrong connection. Check all your connections if they are plugged in right in the manifold.
They sell online a block off for $22.00
Portland Sstar got link bro ?
Got a link?
Next time bro jus buy a automatic manifold there’s no holes in the back