Corsair Crash Landing
Vložit
- čas přidán 28. 08. 2021
- First flight of this super Scale RC Corsair plane ending wit a "belly Landing"
One Leg did no lock down!
Built from a kit of Willi Schachermayer in Germany.
Flight took place at RWMAC near Roundwood County Wicklow Ireland.
This is NOT a CARF model
Watch more of my videos on my Playlist: / @scalejetfred
Such a. Beautiful scale model of this iconic war bird. It sounds so awesome as well. I’m glad the damage is minimal..
Hi Ray Ivie,
Thanks for watching the newest of my 145 videos!
You are correct, Tony was skilful and lucky indeed.
Regards Fred (Ireland)
Well saved with the belly landing👍🏻 Beauty of a plane😍 Moky sound is the best ever🤩
Hi RCnerd74, your nice comment was sent to the builder / pilot Tony.
Thanks for your visit to one of my 145 videos on CZcams.
Greetings from Dublin Ireland,
Fred of ScaleJetFred
A lot of time is sacrificed and money spent, but it does carry great satisfaction in the end,
wives are widowers to this great hobby of ours while we are tucked away in some small room
shed or garage hours on end .
I do not know of any other near realistic sound by a moki engine, love the snap crackle & pop on the slow-motion.
Hi Robert and thanks for the visit to ScaleJetFred; the link is sending you to a video containing early Models build and flown by Peter.
czcams.com/video/We7AY4uvC44/video.html Early days of Airliner flying
One of my 150 videos contains an early visit to Peters home and workshop...
Greetings from Dublin,
Fred
At first i thought the rc plane is small then the pilot came damn. Thats huge iconic plane
Hi JD!
on my ScaleJetFred channel with 145 videos are a lot of different large RC plane in action.
Thanks for watching and Greetings from Ireland, Fred
@@ScaleJetFred Watching From Philippines😀
Well done Tony, you just couldn't ask for a softer touch down without any landing gear.
I hope that the damage is light. Such a beautiful Corsair.
Thanks Fred. AirHammer out!! Mn. USA
Thank you for the visit to ScaleJetFred
AirHammer, specially your nice comment. I copied and sent it to Tony.
Greetings from Ireland, Fred
Belly landings do happen at times. A good trick is to pull the flaps back up almost as you touch down to prevent damage to the flaps . And kill the motor 3 or 4 feet from the deck to possible save the 2 bladed prop. Now if you have 4 blades, your buying a new prop.
Happy ending!
Great relief, title calls crash, id say this rc pilot did fine. Steady under pressure.
Hi Steve, thank you for the visit to my ScaleJetFred channel!
The "Crash" was programed for lesser qualified pilots (like me!)
Greetings from Ireland, Fred
For what he was dealing with, definitely the best outcome with Minimal damage.
Thanks for the comment, I see you know the Corsair well!?
See more of my ScaleJetFred channel with 145 videos.
Greetings from Ireland, Fred
Hello Tony. Perfect belly landing. Greetings from Kassel from Willi (Fräser)
Deine Nachricht habe ich an Tony weiter geleitet.
Gruss Fred
beautiful plane!
Hi Clement Goetke, thanks for the visit to ScaleJetFred!
Indeed it is; to day he flew it again.
Greetings from Ireland, Fred
Great Video 👍
Thanks again Flybrei!
Fred
Nice belly landing. Great pilot skill.
Thanks for the visit and your comment Auzzie! My "ScaleJetFred" channel has 145 videos, many about RC!
Greetings from Ireland , Fred
A great landing considering and hope the damage wasn’t too great.
Thanks for watching Gerry!
Greetings from "ScaleJetFred" on CZcams in Ireland,
Fred
Best landing I've ever seen from him. That's the secret, wheels up landing.
Nice to hear from you again Jeff! Regards Fred
@@ScaleJetFred been flying my hobby king gee bee r1 dle 35RA it's such a cream puff yeah right😜 hope to get some videos so I can post. Just built a rudder from the garbage repurposed aileron got about 12 flights on it without a good rudder, planning to fly her with a real rudder.
Finally had a friend film my GB R1, its title, you can make fun of me cursing, when the wheel axle breaks
Jeff Gee Bee
With all that runway why did you have flaps deployed. Other than that you are an excellent pilot.
Thanks for the visit to my ScaleJetFred channel with 145 videos.
Your nice comment was sent to the builder / pilot Tony Greene -
Greetings from Ireland, Fred
Hello Fred, good Video. I missed you in Oppingen 2021.
I misst being there very much!
But we had Lockdown in Ireland...
Hoping for next year...
I am planning to fly to Orlando 28 November and take my usual flying lesson with a AT6
in Kissimee War Bird Adventure.
Entschuldige die Anrwort in English. Das passiert nach 51 Jahren in Irland.
Danke das Du meinen CZcams Kanal besucht hast!
Herzlichen Gruss, Fred.
@@ScaleJetFred Hello Fred ich habe schon einige Videos von Oppingen 2021 auf CZcams. Schaue auf meinen Kanal "Kopter Max".
*Let the Sunshine In...*
Love the sound! What is the engine configuration?
Thanks for your visit Eamon! The Engine is a MOKI 250, prop 32- 14"
I was using since 1998 the first MOKI 200, size 200 ccm in a crop duster Model - Also in a video on ScaleJetFred channel, using the same propeller. Because of lower ref's I prefer its soun because, for this Model, it is very realistic! Both Motors are from Airworld in Germany
Greetings from Ireland, Fred
Air retracts strike again!
Great landing 👌. What kit is that or is it scratch built?
Hi William, thanks for the visit to ScaleJetFred!
The Kit was collected in Germany:
Built from a kit of Willi Schachermayer in Germany.
It seems to be a "One Man Show" 3 Had been collected 10 Years ago, but only this one was ever completed which took a lot of time because It was not a "KIT" but moulded parts of the main body and wings...
Greetings from Ireland, Fred
Such a beautiful plane. What scale is it and were the landing gears pneumatic or electric?
Hi justanotherguy, Thanks for visiting my ScaleJetFred channel!
The Corsair is 1/5th size. The gears are pneumatic.
Happy New Year and regards, Fred
@@ScaleJetFred Thanks for the reply, do you think that electric would have been better as they are more reliable? Is the plane composite or balsa and plywood? It looks absolutely gorgeous. Great job and thanks for the video.
ooooh, Listen to that sound baby awesome! great job thumbs up.
Nice comment Robert - thanks for the visit to my ScaleJetFred channel with 150 videos.
Regards Fred
I will reply to one of your next videos watch@@ScaleJetFred
JohnVHRC Just posted a video with the same thing!
Can't see it
Fred
👑🛫👑
You make the pilot Tony happy.
Great you find my ScaleJetFred channel with 145 videos.
Greetings from Dublin, Ireland!
Fred
💖🛫💖
Thanks again Kahlid!
Regards Fred
👍👌👍
Thank you!
🛫🤴🛫
Hi Kahlid and thanks for your visit to my "ScaleJetFred" CZcams channel with 150 videos!
Greetings from Ireland, Fred