DIY Force Feedback Steering Wheel DC Motor | Sim Racing FFB PC Only
Vložit
- čas přidán 5. 09. 2024
- TUTORIAL Direct Drive FFB servo motor DIY: • CARA MEMBUAT DIRECT DR...
Sim Racing Parts yang dipakai:
- DIY Direct Drive 15Nm
- DIY Steering Wheel Plan: cults3d.com/:1...
- DIY Steering Wheel Button Box plan: cults3d.com/:1...
- DIY Sequential Shifter
- DIY Pedals
- DIY Adjustable Hollow 4080 Rig
- Other plans: cults3d.com/en...
Support:
Paypal: www.paypal.me/...
Streamlabs: streamlabs.com...
Hi I was wondering if you could do a detailed parts list as there’s none in the description it would really help thanks!
It's not a detailed list, but here is how most diy wheels are made :
Arduino Leonardo or stm32,
Bts7960b,
Rotary encoder,
MY1016 or My1020 or My1025,
12v power supply (50A depends on motor ),
Some cooling fan for the motor and bts,
Pedals with potentiometer and load cell for brake,
If you are using arduino go with EMC utility pro, if you are using stm32 go with mmos
@@noahgiesel9030 How much do the materials cost as a whole?
@@kostinho790 it depends of the kind of project - force you would like to have. If you spend around 150-200 euros you will get results like wheels of 800+ euros.
You could also spend less to reduce motor force, so you have to buy just 1 bts.
The end result is up to you on how fancy and strong you want it to be.
@@noahgiesel9030 Sounds like a value for money choice for me, since a mid-range sim setup costs around 400 euros in my country. I might try to make my own wheel if I find some spare time.
@@noahgiesel9030 How do I set up the cables with the stm32 ? I've never used it and I want to know how to connect the parts to it.
It would be nice if you make a tutorial with all the parts listed and wire diagrams, etc... Its really nice project, I would like to try myself :)
Looking forward to updating the tutorial
Wow! That looks very powerful! Now I'm thinking I should build one...
Great build man, actually I'm working on the stm32 sim steering build when are you going to reupload those removed videos love your channel man keep going and hope to see those videos back soon
The intro looks like an electric fan
Imagine holding an electric fan
Amazing design.
Wah direct wheelnya osw ada saingan nih. Kayanya gw pasang d meja gw, pda geter tu monitor. Btw good job gan, keep it up!
Maate we are waiting for the tutorial :>
Looks amazing
I want to put my seat on cylinders, can you explain or answer me with a link helping me to understand the software pls. Thx ^^
Part list in description? Fucking where?
The arm&hand broken ? this very high torque XD
dude can you share the detailed process..i really like to try build it myself even tho i know nothing how to do it lol..haha..but willing to try it
How many times have you been to A&E looks brutal torq. Just kidding v3 looks proper pucka
Suuuuppppeeerrrrrr, lanjut bro
Are you will to build one for me as I'm planning on building a sim racing PC. Great work and video
Now this is awesome man that thing is fucking crazy strong damn thr final build is beautiful
Excelente project!. Can you upload the others videos of the construction, and how to program the boards, schematics, etc?.
Hello.. yes i will do
@@BSGamingSimulator you told part list on description, i don't know where is it. could you please post it?
Hi bro, could inform the list with the componente you used? I want to manufacture my steering whell using a mega arduíno
Hi, i have a question about projects like that (using Arduino), when you put a value to the "degrees of rotation" config in the software, the motor acts like a brake to stop the wheel to these value?
Or (for example) you need a gear mechanism to stop on 900° of rotation of the wheel?
Yes, endstops are handled in software.
I would love to see you using this in-game and get your feedback on how it drives.
Keren gan, dijelaskan dengan detail dong sekalian bahan nya juga
Siap om.. saya jelaskan secara lengkap di video berikutnya. Ditunggu yah
@@BSGamingSimulator oke
Hello, but using the ffb on the steering wheels nn you go to wear out the brushless motor?
Hey great work,!!! can you please share the connection diagram of all the components, such as the connection between the stm32 board and bts7960 motor driver. It would really help me build my steering wheel. Thanks in advance.
Hi.. i will make tutorial soon. I got very busy now
nunggu detailnya nih om, semoga berkenan dibuatkan videonya hehe
Siap. Maaf lg sibuk bgt. Tapi sebentar lagi release
On the V3 you don't use the decode printer?
This is brilliant! but... what about making the same with stepper motor and being a direct drive?
You cant. Only DC Brushed motor
nice work
Wapiik mas bro.. btw estimasi biaya habis brapa semua versi?
Would you say v-belts and pulleys are enough for the FFB? Do they slip at high resistance from the motor?
No, thry can hadle my FFB. If tou want better, use XL pulley
you use v-belt sterring wheel don't lose position when you use the wheel ?
Encoder should be connected to the wheel instead of the motor, so no.
Kapan mulai upload video bikinnya mas? Saya udah nunggu-nunggu. 🙏🙏🙏
When will the detailed documentation and building of this wheel be released? Any updates?
i've used 4 bts7960 with a motor 27volt 40Ampere 960watt, dual powersupply from server 12v 80A in parallel, after 5 minutes 2bts in electrical surge, and 1 power supply is broken...
@Fábio Garcia per il semplice motivo che se ne utilizzi uno lo stesso si brucerà a causa dell'elevata temperatura. Ora infatti nel mio nuovo progetto ho inserito 12 bts alimentati da un trasformatore di corrente 14 volt 170 ampere. Ora funziona tutto a meraviglia e la coppia del motore è mostruosa
Looks great. Is it better than T300?
Why did you use a gear instead of building the motor directly to the shaft?
Bro which software you use here 0:35 for making this type of blueprint.
hello buddy, where is the diagram connection for the v3? thanks! Very good job
hey what is the pulley used in v3 and can u give me the size of the pully
Can I use polyurethane belting to make the belt? Because I can’t find the belt any where.
a XL or HTD 3M Pulley is sold everywhere. use it to better grip...
Can I use a car wiper motor with cut off gearbox?
man this build works in simcades?, like fh4 or the crew?
could you use MY1016 Electric Bike Scooter 24V 250W Motor or the condition is 12V?
good job Man
Do ou have any picture of how do you set the tires in STM32?
How are you reading the FFB data from games?
Hey. my motor control does not work. I connect everything according to the scheme. tried 2 different drivers. motors also took different power. he sees the encoder speed, but there is no reverse force.
Hi BS Gaming.
Is it possible to make this for an abox one??. Thanks
what power supply did you use? Specs. Thanks!
Could you make a tutorial please
did you put an arduino on the steering wheel separate from the rest? for the buttons?
Arduino just for wheelbase. Pedals and button separate. But now i used STM32f4 board
@@BSGamingSimulator could you do a tutorial on the pedals and shifter?
I like your CZcams video
rfactor 2 mod video
I haven't learned to make rfactor 2 mod
where do you buy the quick release? I have 12mm shaft and can't attach it.
Simply use 2 bolt for horn
@@BSGamingSimulator Hi, i'm looking for the diameter of the center hole of the quick release, do you have it ? Thanks
Very nice. How to make encoder?. Tenés un tutorial de como hiciste el encoder? De cuantos ppr es?
I used omron encoder bro..
cost in usd? if i get 2x 775 motors??
Hi. Where can I find the code for Arduino Leonardo ???
How much does both pulley weight, does it effect motor
weight isn't give an effect overall. But the ratios between them...
what is the name of the card you used in v3? should it be programmed or just connect the wires?
It is STM32F407VET. You can use other version like F407 Discovery or VGT. Firmware is MMOS FFB. There are some Vietnamese guys making new firmware for this board. GG VNM Simulation.
discord.gg/muWaraP46Q
How does the FFB compare to a Fanatec or Logitech wheel?
I never tried fanatec, but it is greater than logitech
Seberapa panas mesin selama permainan intens?
Apakah boleh disharing part2 yg dibutuhkan om ?
Hi mate great job first of all and i just have a questiın for you. Can you tell me motor specifications?(example rpm, is it includes encoder or not or anything else) would be glad if you reply, thanks.
I used MY1016 180W
@@BSGamingSimulator thanks al lot dude, but is this engine too much powerful for this device?
Sir is that a trapezoid threaded?
How did you do the electronics?
Itu gigi nya boleh pakai push button mas...
Will the construction stages come
Could you please tell me what kind of elettric motor and encoder you used?
I used MY6812 and omron 2000ppr encoder
kami tunggu tutorial yang pake arduino bang,
hi! thanks for the video.
I have two printers, and I want to use two motors, how do I weld them? just to the same contacts in parallel?
can I use stepping motors for this?
have those to be the same model or do they have the same power and ° of step, or just the same ° of step?
thank you!!!
Ada link pulley sama belt nya ngga mas? Saya nyari belt gitu belum nemu di olshop
Sir, if I raise the steering wheel to 15%, I'll lose the steering wheel force feedback, how can it be misaligned?
Maybe your PSU not enough to power your DC motor. Also what FFB software used?
@@BSGamingSimulator The source I use is 12vol 10a motor 775, software wheelconfig 021
@@vansanglam5230 you may want to try MMOS2014 or EMC software. Also 775 motor is wastes powerso much. Try to replace MY6812 motor
@@BSGamingSimulator I want the milk to stop being off-center
What is tue strength during the testing in the first fee seconds?
Brother please make a detailed video I really want to make this
Fantastic project! Where did you buy those pulleys an BELT ?
What dimension.?? Pleaaaase!!! :-D We can get in touch by email too
What size display is the screen?
How much did it cost to build?
Around $200 maybe...
tutorial lengkap buat pemula ada dimana bro? saya masih clueless walaupun udah replay video ini berkali-kali.
Iya maaf ini emg cuma video teaser aja. Full video nya ilang karena rusak nya HDD.. Cek video saya ada tutor lengkap bikin direct drive..
@@BSGamingSimulator siap bro
Which software you used
damn thats like washing machine haha
Hello, don't you put an encoder on it?
Bikin tutorial nya bang 😂
Holy fuck man lol insane power
why not direct ?
can u tell me plz i want to build one but i see many people are not building direct but with belt system, anything u can teach me why u use belt and not direct ?
@GABRIEL BEZERRA thanks for info
small motors looks very good for belt,
bigger motors are easy to use some direct drive, but the medium motor witch u say they have short shaft, they can make it longer.. ok thanks again im going to test direct first cause my motor is medium but strong with 350w 30.000r/min this is strong enough.
Can I use motorcycle starter as dc motor?
Dont.. its not designed for continously used
it is working with Forza Horizon 4?
Bro how to connect bts7960 to computer psu
Tutorial please
Hi, this is really cool! What kin of motor do you use here? Is it servo or just regular brush motor?
It’s a regular brush motor I think
Where can I get encoder and scanner please tell me
Where can I get the software and firmware?
What is your dc motor in the video
MY6812 180w
Loe bikin wheel apa kipas angin 😆
kalau pakai arduino uno r3 bisa itu om????
bang, kalau steering wheel diy gini support game apa saja ya?
details on pulley and belt
gan yg pake resistor dari mana kemana?
Untuk PSU kan kabel nya banyak, lha kabel yang dipake buat power steering nya yang mana yah
Kabel hitam sama kuning gan
Love to build one but I’m afraid it’s going to throw me out the window.
lol...
video Part2 lengkap'y ko diapus om.. saya mw liat diagram dengan 2 BTS yg dulu
Iya itu di channel lama yg sdh dibeli org... saya upload lagi secepatnya ya om
oh gt om ok ok.. soal'y part2'y udh ada tgal bikin 😁😁😁