HOW TO MANUALLY MOVE BROKEN AUTOMATIC SEAT TO REMOVE BOLTS 2016-2022 MALIBU BROKEN SEAT ADJUSTMENT
Vložit
- čas přidán 29. 08. 2024
- Adjust Chevy Malibu Seat
In this video, we'll be showing you how to manually adjust a broken automatic seat in your 2016 to 2022 Chevy Malibu. Sometimes the automatic seat tracks can become stuck or malfunction, leaving you unable to adjust your seat to the desired position. But fear not, because with just an Allen wrench or a drill, you can manually adjust your seat and get back to a comfortable driving position.
First, locate the screw that controls the seat tracks. This can usually be found towards the front of the seat, near the floor. You'll want to use either an Allen wrench or a drill with an Allen wrench attachment to rotate the screw. Rotating the screw one way will move the seat forward, while rotating it the other way will move the seat backwards.
Make sure to test the seat position after each adjustment to ensure you've achieved the desired position. If you find that the seat is still not adjusting properly, you may need to check for any other broken parts or consult a professional for further assistance.
Overall, manually adjusting your automatic seat can be a simple and easy fix for a broken seat track. So grab your tools and follow along with us in this video to get your Chevy Malibu seat back to a comfortable driving position.
Bruh I thought I was gonna learn how to fix my chair 😂😂
sorrry lol
How do you remove the motor?
How do you manually move the seat up or down????? My seat is way too high!!!
Well don’t eat too much from now on, you’re seat is telling you to slow down on those carbohydrates, 😂😂😂, t hi ink about it even the seat itself give up just for you to realize this 😂😂😂,
I appreciate your detail my guy ! You really came thru 🙏
I got the right side, no problem. I’m having trouble getting my drill up under the seat to do the left side. Any suggestions?
I have a 2011 malibu and there are no screws that hold on the trim. When I look under seat I can see that there is a metal u-shaped clip holding it on. I have tried pulling on it but I'm afraid it's going to break. Is there a trick to these clips? Need to replace switch.
Just work smarter not harder. That's all you need to know bro
What about if the seat moves back snd forth, but it is the motor that controls the tilt angle of the back of the seat? I can recline the back of the seat. I just can't move it back up again. Would this work on that function too?
Same!
OK I get what you’re saying but what’s at the end of the drill? Did you have to use a bit? You just said drill I really need to know because only one side of my seat is going back.
what I did was - I removed the cables that attach to the motor of the seat and used the drill motor to spin them instead of the actual burnt out motor on the seat track. I did not use a bit. the part was already in the seat all i did was remove the cable from the motor and put the end from the motor into the drill. and spin. repeat this process with both sides so you can move the seat evenly.
How do you remove the motor from the tracks ? Please help
I like the part where he showed how to remove the motor
Cool thanks
What year Malibu is this your working on
What bit are you using on the drill? That would be a huge help
Looks like he's using the gear off the motor
It looks like it says in the video description that it’s an Allen wrench attachment?
He’s got the drill tightened on the pin that moves the seat
How do you remove motor and detach cables?
Remove the seat and remove from underneath
You can pull the wire really hard and it will come off. Only do that if it’s damaged because it’s bolted and built into the track
Is there a way to move it if the rod for the seat is missing
All seat aren't that easily accessible, besides, where's the HOW TO set up part of the video???
What about recline? Mine is stuck alway the way down
Can I use a Allen key
I got a shitty Malibu 😭😭😭
Is it necessary to remove motor 🤔
Would also like to know
Looks like he's using the gear off the motor
Such a useless video not showing how u set it up
😞Looks like he's using the gear off the motor......how do you get the motor loose I guess we'll have to find out🙃