Steel Cart Mark IV Wheel Test One
Vložit
- čas přidán 29. 08. 2024
- www.coasterdad.....
After a few mishaps in testing the earlier steel cart, I came up with this design for the wheels. Let me know what you think of the prototype! -----
Please support me on Patreon - / willpemble
Here's where I post stuff:
/ willpemble
/ willpemble
/ willpemble
/ willpemble
And for the grownups among us who want to rock their business...
/ willpemble
www.goalboss.com
*The amount of work that you put into this: up vote and commendation.*
Thanks, R Paul!
It's definitely a labor of love. So much to do, so much to learn :)
Thanks for watching!
Best,
Will
You're welcome. Thank You. Peace. :)
Also with individually steerable assemblies like this, special track geometry is required. In curves you have to make the track gauge narrower since the effective horizontal distance between the wheel sets gets narrower. B+M, Intamin and all the other players that use this kind of articulation do this. On your tight curves you'll see the guide wheels pinch the track too tightly and bind up.
Dude. So happy I found you. Thank you for sharing your knowledge and experiements. I wish more engineers and creators posted as many videos as you. Can't get any good info!
That was fun! The new cart chassis is looking good too.
Always excited for these vids
Same :D
These work BEAUTIFULLY will. You have a lot to be proud of. I suggest banking the track a bit more and adding lateral load supporting beams near the turns. Since your coaster is so small scale, the stresses usually localize more dramatically to areas and with this new steel cart the speed is going to be greatly increased.
Just a thought !
Good Moms
Good Moms
superb desiign cant wait to see it done.
Great work, so come to Australia and build one for my grandkids hey... lol
I'm back and forth to NSW two or three times a year :)
Hey Will,
I really need your help!! I recently came back from a Theme Park and decided to look at Homemade Coasters and I've come across your videos which are insane. your videos have motivated me to make my own Rollercoaster in my Backyard.
I'd like to know what Size PVC Pipe you use, how you made the Rollercoaster pipe bend to make drops and how you made the Wooden cart for The Caution Zone!! Please Respond
- Sincerely Jeremiah
Add some wheels for under the tracks so there will be a lower percentage of the cart falling of at hills at fast speed.
thats what upstop wheels are before he lets go he says that he's gonna add them
Can u give me links to where you bought the wheels
Ever thought about making it fully automated. Chain lift, Chain dog, Mechanical brake, Brake Fin, Control Console, etc? Cool DIY project. Wouldn't mind giving ideas if you ever want to make it automated. (Systems Engineer)
I work at Six Flags Magic Mountain and have gone through the ride mauals on how each component works. If you ever need a design idea I might be able to help. Also I have an idea on how to make a cheap and effective automated ride system using simple dmx control system.
Amazing. I'm not sold on the PVC with 2x4 supports though. I see this was 9 years ago though. Is the PVC track still there and did it work?
It’s long gone. UV destroyed it in a year. I now prefer building with steel!
#StealIsReal!
You're missing a roll axis between the front and rear sets.
This was a great video Your track is awesome!
How did you make the wheel assemblies pivot and rock?
What's the cost of 50 meters track please and where we can buy the design of our roller coaster.thanks.great videos, congratulations
How much weigh will it stand and will tje screws bend or come out with the wight
Where is the bottom wheel?
In this video, the bottom wheels (called up-stop wheels) hadn't been installed yet. I was just testing the new wheel assembly design. The final cart and wheels definitely had up-stop wheels.
beautiful
that's super cool
u should add a wheel underneath so it wont fall off the track
can you pls make a video on how to make a cart
How did you make the wheels be able to pivot?
I love what your doing with your coaster I'm making one myself and I was wondering if I could buy this Steel Cart Prototype off you...the only thing Im concerned about is the width of the cart itself so I would need to know the PVC Pipe width and the wooden intervals width inbetween the PVC pipes, so I can adjust my track...The payment method would be through PayPal and I willing to pay 100ish USD...And I would need you too add wheels that go on the bottom of the tack for stability if you would like to do this deal please contact me though CZcams, Thank You!
This is so cool, love it!!!!!!
where did you get all that equipment will
Up stop wheels?
are you going to build a lift hill for this?
hi will pemble. i live in denver. Can you build me a roller coaster with a 2 loops and a 2 corkscrews and on the 2 steel cart, like a Multi-Inversion coaster. i would like a lap bar restraints on carts please
Esses canos aí são de ferro ??
So the cart did not have up stop back then?
Not at that stage of the build. I was just testing the new cart design.
I'm just wondering if you needed a permit to build that.
..only in USA people ask such question... And after that they claim they are the free country, yet cannot do anything without asking for permission from Big Brother.
+digimaks...PREACH 👍...but will go and tell everyone else how to live...can't hang clothes on line outside. .can't park in front yard..can't BBQ in yard..can't do home repairs...ect ect ect. .
This is so cool. Someone is definitely going to die on this.
I die laughing:))))).with the right safety..will be ok.
0:12 when a 14 years old treis to build a coaster btw 2019???
I challenge you to build a roller coaster 40ft high because this rollercoaster looks 25ft
create a manufacturer with other backyard coaster makers
would you adopt me?
I-
U are an awesome inteligent man
You should make it go backward
u are awesome
ปากมากแท้บักอันนี่แหม!!
You were bored
Always excited for these vids