NEW 6.7 Powerstroke FULL INTERCOOLER PIPING - Best In The Business!!
Vložit
- čas přidán 21. 08. 2024
- GET THIS KIT HERE:
bit.ly/Piping_Kit
POWERSTROKE STAGE TWO KITS HERE: bit.ly/stage_t...
POWERSTROKE STAGE ONE: bit.ly/STAGE_1
Check out this new intercooler piping kit for the 2015 and up 6.7 Powerstrokes, this is a prototype kit and the production kit will be launching soon!
Best looking and performing kit in the business
GET YOUR POWERSTROKE PARTS HERE:
bit.ly/606whp
Follow my instagram:
bit.ly/COREYIN...
The Best Foam Canon
amzn.to/333Drkd
Pressure Washer
amzn.to/2xGl6xW
Iron Remover
amzn.to/2R6g58D
My soap
[TOP SECRET] for now
Clay Bar I use
amzn.to/2R7lZ9D
toyota
cars
JDM
Supra
2020 supra
mkv
a90
b58
ford superduty
f250
diesel trucks
moderndieselcorey
Corey vlogs
diy install
6.7 powerstroke
diesel straight pipe
lifted trucks
About time!!! I've been waiting for this for so long!
Put this kit on my 2019 6.7 this weekend with the coolant reroute kit. I FREAKN LOVE IT! The reroute kit cleaned up the lines running throught tthe middle of the engine bay. Fit like a dam glove!!
I definitely want to do this to mine down the road. After I finish some tuning test with factory setups for videos. I then plan a kit like this.
Looks great. I love the fact you can keep your previous intake. Can't wait to see the powdercoated ones.
Is this egr deleted?
Send one to Az ,so I can test it in 110 + degrees. That is so awesome.
Full pipe kits have been out for years MPD full piping kit runs up to 17+ trucks I run one with a budget turbo kit on a 14 F350.
Hairspray for the boots. Goes on wet, dries sticky !
I got impatient waiting on SPE and got the No Limit kit and its pretty bad ass. I ordered the 11-16 kit as I previously moved the battery back when I had the s&b. My truck is a 17. I like SPE and buy some of their stuff as well and plan on doing more too
Did it work with the s@b filter or u used the filter from kit
@@marcom8166 I had to use the filter from the kit and remove the box leaving the battery tray, the no limit filter is a larger diameter as the piping is much bigger then the s&b as well. The s&b filter will not fit the no limit pipe.
Man I can’t wait to get this for my 16 6.7. Just ordered the Emperor kit yesterday to upgrade my Turbo!
Love to here what you think of the turbo kit
Freedom five will let you know.
Just commenting so I can get an update also.
How did it turn out ? I’m going to get the kit maybe for my 2016 what turbo did u go w in that kit
That intake manifold would look really good with the sinister diesel blue
How does SPE's piping kit compare to MPD's and Pusher's kit? Does SPE's have more flow? I've been patiently waiting for SPE to come out with this for my 2019. All their other products kick ass hoping they can do the same with this kit.
Man I sold my 2019 dually. Had everything SPE. I’d love to have another. And do everything SPE again. Including that and turbo. Awesome trucks
Im ready for it!! Hope the fitment is perfect for the emperor kit as well i have on my truck!
So they have a kit for the 2011-2014 turbos... SUPER interested in this kit :D
You will never get it.
Big peace of metal. That sounds like a good name.
Y-Bridge 😂👍🏻👍🏻 love the build brother
Great kit however, , , Seems like there are a couple janky issues with a real good fit in those couple places you mentioned. Would be nice to see it put together correctly. I'm sure those things would bother a lot of people.
A little late now, lol but you can run to the dollar store and grab some cheap hair spray and put on your intercooler piping boots. They will about never blow off again.
Time to do some 0-60 and 1/4 mile runs in this beast!
Love it, really looking forward to what SPE is going to do for the 2020 Powerstrokes! Tuning and all...
Let me ask a stupid question, are these pipes POLISHED ALUMINUM or are they aluminum pipe that has been chromed plated? Keep up the good work with your videos dude, they're very informative. I gave this video a gigantic thumbs up. 👍
The coolant reroute that pusher intakes sells works really well and looks clean.
I run SPE tunes but a smeding piping kit and I can say on my truck it seems like the hot and cold pipes are just a tad longer than they should be. Or my intercooler seems closer to the turbo I'm not sure.
Would I have to delete my truck if I just wanna upgrade all my intercooler piping?
Are you going to run the 370 ball bearing on stock fuel at first? I'm curious to see how it spools before you upgrade the cp4!
Can you make a video of Powerstroke Oil and Transmission Fluid going 200+ especially when towing what to do to lower the levels and talk to us why only powerstrokes run hot
When can I get this for my 21 power stroke?
Looks amazing cannot wait to get the one I ordered March 29. Apparently had some quality control issues with first batch (per email from SPE), but now getting a few in at a time. Will let you know when received and results!
👍👍
Thats what they have been telling me for months. Did you ever get yours?
@@ZionRanch no I finally canceled order. Too bad it looks like a great system just can’t deliver.
@@daiglesrd I wish they would just be honest instead of missing every promised deadline.
Need this kit. I can’t find one that supports using the S&B intake. They want to use their own intake and filter.
Do you have to retune after taking off the the stock intake?
I've been waiting over a year for my order to come in.
Is this going to use the current hot and cold side piping available from SPE? Or should I cancel my order for those and buy this in one package?
2 years later and it’s still prototype. I like the this color better. Did you tune your truck? What happened to the throttle sensor?
your gosh damn right
Ordered a intake n havent received any confirmation.. goin on 2 wks. Cmon brahh...
Did you ever get it?
Nice!....sounds like my truck
So… other than looks, what did this install do for your truck? What changes do you see?
How come I cannot find that intake on their website are they not selling it anymore?
Can you do this to a stock truck with no tuning ?
Looks good can't wait till I do mine, now you need a coolant reroute kit. I also did the low temp high flow thermostat.
Question, do I need to be tuned and lose the EGR for this?
Since you would be removing the stock lower intake, which contains the throttle body butterfly valve, I would assume as much. The throttle body works in conjunction with the egr where the butterfly valve restricts fresh air flow into the engine while the egr valve is open (during regen I believe). This encourages the engine to use more EGR air as opposed to fresh air. Therefore, no more egr means no more need to restrict fresh air. Moreover, when doing EGR delete, it's common to unplug the throttle position sensor (TPS) because there is no need for the butterfly valve. There are a few forums in regards to this matter. Hopefully this helps.
Yes
I have a 2014 6.7 with the SOFT swith
Can i get transmission turning for my year?
Most tuning companies come with trans tunes
If you run SPE tunes they're labeled if they change the trans tune or not
Bought the truck deleted
Dont know how to get a
Technician all I can do is monitor my gages and clear any codes I might get
Sorry learning
@@kwhopper5409 if you have an ez lynk auto agent, you'll be able to find SPE tunes or whoever you want tunes from online and link with the VIN of your truck or your email; see if you can find a walk through of the whole process online💪
Eric Chavez click on “ technician “
Have you noticed a difference after now after this current mod with your SPE CCV reroute?...Mine seems to puff during idle a little bit...Maybe this is haze?...No oil drip though so that's good.
So I just got my first diesel and it's a 2017 ford f250 Platinum. I'm stoked but I want to do some mods to it. With the intercooler piping kit do you have to tune the truck with this mod? Let me know.
Subscribed
So eager to get mine. Looks clean and definitely improves flow.
Did you get it?
Not yet. Had been working on moving and renovating a house. But soon!
Does this kit come with the ccv plate and hose? And/or cheese grader piece? Or are you telling customer they have to delete that on there own?
does the kit have all the hook ups for the sensors or do I have to delete certain ones? I have a 2013 Ford f250 6.7 with a egr delete already and H&S programmer.
When can I buy these!!!!!!
I need mine asap 🤘🏼🤘🏼
6:07 Im weary of Plastic radiators but a thermostat Housing right out of the engine especially considering diesels run hotter than gas engines is even worse.
who did your tuning for this setup, have same exact setup on 2013 with stock turbo and need tune for it.
Corey sorry for the dumb question but this is only aplicable if the truck is deleted?
Pretty sweet looking setup.. Question: how did you eliminate the throttle body assembly that attaches to the lower intake manifold?
Wondering the same thing myself. Seen a couple of kits with this style set up and they seem to be (off-road use only) they don’t comply to emission standards
Nice sounds bad ass
How does his stock turbo sound like that
Nice!
When is this going to be available I been looking at their website for this for the last 3 months
What intake is that? When is your system going to be ready?
MPD piping kit looks better
Which brand EGR D3l3t3 kit is that?
Hi I need help with my truck I got 2011 Ford F-250 diesel with 6.7 i was getting misfire 2 and 6 injector but I replaced and still doing the same can you help me plz
Ive installed this kit, my question is,is there anyway to get my turbo boost gauge to ever work again? Because it hasn't worked since i installed the kit
Did you ever get your turbo gauge working? Interested in buying this kit, but not if that gauge will become broken
Sweet
Does this only work for deleted trucks?
Following, I have the same question
You would need to have the EGR deleted. The EGR goes to the metal part of the factory intake he removed.
Did you remove the turbo silencer ring?
Roughly how much HP did this piping kit add?
Is this kit designed to run with stock turbo the mpd isn't?
Put me down for one please 🤩🤩
You are using the stock turbo?
Is this tuned or stock with the add on?
Jesus dude, watching these powerstrokes and duramax engines makes me happy i got a cummins.
Is there a kit for the turbo with the oval top pipe?
So what about the throttle body?
Did you use the EGT sensor that was in the EGR pipe or did you use one from your DPF?
either or
@@TopCorey been waiting weeks on my intake piping and coolant reroute kit.
Use windex
That’s a factory turbo?
Did you get turbo whistle with this kit or did you already have it with the air intake?
He had the silencer ring machined out of his factory compressor housing when he had it built. But if you have an aftermarket charger, you will hear it spool with any piping kit or intake tbh.
Why are u running 2 alternators ??
What made you go with them over the full crusher kit ?
* pusher LOL
How do you pass Pa. state inspection after you deleted ? Do you know someone who will just throw a sticker on for you or what ?
LOL
Update on the piping ???
Is that ez Link code for proven tunes?
When will it be available
Where do I get this kit, it’s not on the website
So I just bought a 2014 f350 fully deleted love the turbo sound but what it the bark noise they call it when you let off the pedal?
Turbo lag
Charles Bray whistle or the whoosh
@@shanetaylor7581 whoosh
Charles Bray yep. Love it. I guess if you put a manual switch on the jake brake it will whistle more/longer. But not sure how it’s done yet.
Charles Bray I have the 12 f-450 fatbutt.
Anyone know any 2020 powerstroke deletes out there yet?
How do I get an application for employment dream job !!!!!
Will this fit a 2020?
What's the reason for installing this kit? What does it do for the truck?
cosmetic power 💪
Oh okay! That is a good reason!!! Now if I can just convince my wife. Lol
@@TopCorey I installed this kit ,and ever since I installed it my turbo boost gauge hasn't worked since, is there anyway I can get it back to working?
It’s an intake manifold
Are you Corey Willis?
So it’s been a year
Where can I buy this kit?
Where can I buy this?
Sent this email to SPE
--
Hello, I’m looking for a tune on my 2020 F250, 6.7. As of right now it’s all stock. Do you guys offer a tune for the 2020 ? If so, what kind of gains will I be seeing. ( ball park ) thanks so much for the info.
Robert in FL.
--
The response I received
“ I don't, sorry. “
--
Guess they are not developing anything for the 2020, 6.7
I wasn’t expecting that response
I think they have encrypted ecm’s.
@@abramspearman9046 Nope already been cracked.
Warpath ah, that’s good to hear that gm is the only one so far.
maybe idk Intake Y-Pipe...
What happen to your Instagram?
Very nice. I assume those of us in the communist state of California can't do this awesome looking kit. I am really curious about your review after driving it for awhile.
Is this kit available yet?
Nope, been waiting months.
@@ZionRanch damn it
You selling intercooler parts yet don’t see any