I never expected THIS on a diode laser! | xTool S1 laser
Vložit
- čas přidán 10. 06. 2024
- xTool has released their new fully enclosed 40w laser engraver. This machine is a class-1 laser engraver and has a 20w and infrared (IR) laser module option as well. Should you upgrade from the xTool D1 pro or other diode laser? Check out the video and let me know your first thoughts on this new diode laser from xTool.
Thanks to MakeBlock for sending this xTool S1 laser to me to test.
UPDATE:
Upgrade your laser for safety and savings! Trade in any open diode machine for an enclosed xTool and get up to $500 off: bit.ly/3vHLipP
Affiliate Links. If you use any of these links it doesn't cost you any more, and they give me a small commission as thanks.
Get the xTool S1 here:
U.S.: shorturl.at/uLOXY (xTool Discount Code: VW10)
U.K.: shorturl.at/koqtF (xTool Discount Code: VW10)
If you're interested in the D1 Pro click here:
U.S.: shorturl.at/tJNV8 (xTool Discount Code: VW10)
U.K.: shorturl.at/jmnqD (xTool Discount Code: VW10)
Small Business Ideas with xTool D1 Pro: shorturl.at/dqCDZ
__________________
Buy materials for your laser (MakerStock): shorturl.at/fhiHI
- Use MakerStock discount code "VOELTNER10" for 10% off
__________________
Amazon Store Front: www.amazon.com/shop/voeltnerw...
Recommended videos for buying a laser engraver:
Diode vs CO2 laser: • 40w diode vs 40w Co2 l...
Watch before buying a CO2 laser: • Watch this before you ...
Project to sell quick and easy: • EASY projects to engra...
Timstamps:
00:00 Overview of S1 features
01:20 Fully enclosed diode laser system
02:40 Laser air assist on S1 laser
03:18 Difference between diode wattage and modules
04:15 Work surface of xTool S1
05:07 Engraving speed of xTool S1
06:21 What I would change about this machine
07:30 Curved engraving with laser
09:11 Laser autofocus on S1 laser
09:54 Conveyor and safety features
11:17 Should you buy the S1?
#xtool #laserengraver #laserengraving - Jak na to + styl
Upgrade your laser for safety and savings! Trade in any open diode machine for an enclosed xTool and get up to $500 off: bit.ly/3vHLipP
If you want a discount on this machine, go to shorturl.at/jsBCZ and enter code "VW10" for an additional $80 off when you use the code at checkout.
Just bought this in the 20W for my wife. She’s currently using a Cricket and wanted a Glowforge Aura but after research, I found this is a better option. She can change the laser between the 20W to the 2W or go up to a 40W. All the reviews of this new machine have been positive. Hope she likes it, I sacrificed all my Christmas presents this year to afford it!
She’s gonna love it. You’re a good man.
Best review from this machine. And I have seen a lot… thank you.
Thank you so much! Glad you enjoyed it.
Awesome Job, I can't wait until mine arrives !!
Thank you! You’re gonna love it.
Great video as always Matt. ❤
Thanks David! Hope all is well with you guys.
Jesus.. you've got a great woodworking studio behind!
It’s my happy place. 😂
Great video. Very informative.
Thank you, Bailey!
Thanks so much for this review. I started out wanting the P2, but the price puts me off a bit, since I'm just beginning this new adventure. The S1 is attractive to me because i can start smaller and expand if i need to. Your video made up my mind, going with the S1!!
Glad it helped! You’re going to love this machine.
that stare at the end 🤣
It was a test to see if you made it to the end. I’m sure you skipped to it. 😝
Yes indeed perfect
It’s great
good review and all, I like the idea of having swappable modules for variety in a small space. Eh, but I always get a kick out of "makers" that get an open gantry laser and then whine about it being open... as a maker, the first thing I do is make an enclosure or what ever else I deem necessary for the work I plan to do... 🤗
True! Open lasers are so 2022. 😂
Great review! I'll be back!
Excellent. Thanks so much.
This would be my 1st laser machine. It will go well with my Bambu x1c 3d printer as ill use both machine to come up with awesome projects.
I’ve started using my X1C as well with some projects. It’s a great combo!
Been looking between m1 and s1 I have a cricut maker so I don’t need it to cut vinyl. How thick can it cut
Great review. Can the focus lens be changed? I don't see them being offered for S1.
Thank you. It can be removed so I don't see why it can't be changed. They probably don't offer it generally yet because all of the machines are still under warranty, but if you have an issue with yours I bet they can replace it.
Hey Matt, great, informative video! I'm a 'newbie', trying to decide between the M1 and the S1. You mention 'batch engraving'... this is one of my big questions. Can you engrave/cut multiple pieces at one time in the S1? For example, if you had 4 wood coasters that you wanted to engrave, could you put them all in the S1 at the same time so they engrave in one shot, or do you have to do it as 4 'separate' operations? The lack of camera intimidates me, but that being said, since this is my first laser, I suppose I could adapt to either way? Just curious on your thoughts. (I have 2 Silhouette Cameos and I'm very tech-savvy, so not too concerned about becoming familiar with, and using the software.) :-)
You can absolutely do batch engraving on this machine. It just won’t have the adaptive technology like the P2. You’ll want to make a template for repetitive engraving, but that’s super simple. This will be a nice machine to learn on.
@@VoeltnerWoodworkingthank you so much for the swift response. I will definitely be going 'all in' and getting air assist and the filter; Overall, if I'm choosing between the 10W M1 ($1949 for what I've configured) or the 20W S1 ($2599 for what I've configured), what would your recommendation be? Worth the extra for an S1 for a newbie? (Watching another of your videos... I'll be subscribing, so informative!)
Thanks so much. Beyond the bed/working size difference (385mmx300mm for M1 and 608x388 for S1), the wattage of a 20w will allow you to cut much thicker material. I'd say if you're not going to need the knife to cut vinyl for the M1 (since you have the Silohettes), then I would go with the S1. You're going to be able to do so much more with this machine. You'll also be saving $80 by using the code and should get free shipping, so that's icing on the cake!
Hi there, I am wanting to get a photograph engraved on stainless steel using the X-tool S1 with the 2w IR laser. I am based in the UK and wondering if you are able to do this? if so please reach out to discuss further. Many thanks, Joe
Hi there. I’m unable to take on any commission work at this time, unfortunately.
Does this machine work with the cup/bottle rotary?
Yes, It’s compatible with the RA2.
I'm completely new to lasers. I read that some can oxidize metal and create color. Do only certain types do that? Does this one?
Yes, diodes are great on stainless steel to get different colors. I showed some of that in my D1 40w video, but I highly recommend the S1 like in this video because of the additional features and safety over the D1. Here's the D1 video for reference: czcams.com/video/B0PvDSwKWsY/video.html
Was told by XTool the s1 could mark inside rings - I’ve received my s1 but can’t find a way to engrave inside rings - anyone worked this out?
You have the RA2 rotary and riser? You have to tilt the RA2 I’ve heard but I haven’t tried it yet. Maybe this will give me a reason. lol.
Yes I have riser and RA2 - it seems the focus range is so close with both the 40w and IR module that you can not get inside the ring even with the ra2 tilted at a 35-45 degrees.
There are loads of videos of the D1 laser achieving this.
One question I have is I know you pick up the corner to corner but how do you pick up round stuff?
Lightburn has a center finder option built into the software which may be an option for you. The best way I have found to do round objects is by making a template where I put the round object in the middle of the template and it lines up perfectly every time.
@@VoeltnerWoodworking I was talking about in xcs! You must only be able to pick up square and rectangle objects with xcs! It would be nice if it was a four point pick up then you could pick square or circle
I'm getting ready to release a video on the updates that just got done with XCS. It addresses this concern. Hope that helps!
@@VoeltnerWoodworking I seen they updated it to be able to pick up round stuff but look forward to your video on it
where can I find a S1 20w test file? I could not find it on their creative inspirations
I find it much easier to build my own. The xTool support page has a how-to on this topic, and you can customize it however you want. Check out support.xtool.com/article/872?ref=FCYiXVqZuxgXT& and let me know if that works for you.
@@VoeltnerWoodworking thanks so much!
Samcraft
There's no shipping to Greece 😢
Dang. Wonder if you could have a friend in the UK or US ship it to you.