How To: Whirlpool/KitchenAid/Maytag Basket Drive Block Kit W10324651
Vložit
- čas přidán 14. 06. 2017
- How To Replace: Whirlpool/KitchenAid/Maytag Basket Drive Block Kit W10324651 www.appliancepartspros.com/whi...
Symptoms: splines are damaged and the inner basket is not being driven.
Tools: small flathead screwdriver, ratchet with extension and 7/16" socket, wire brush, penetrating oil, spanner wrench, plastic hammer, towels, Phillips screwdriver, putty knife, flathead screwdriver, chisel, blue threadlocker.
This Whirlpool/KitchenAid/Maytag made Washer Basket Drive Block Kit replaces the following older part numbers on Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Sears and Kenmore Washers: 1877235, W10291415, W10291416, W10291417.
Buy the new Washer Basket Drive Block Kit W10324651 here: www.appliancepartspros.com/whi...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepartspros.com/. We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros - Jak na to + styl
The presenter does an excellent job in showing all the necessary details clearly.
My wife has this exact machine, except silver. I noticed today it wasn’t agitating and after watching your video removed the drive block. (I had a spammer and all necessary tools.) Sure enough, the splines on the tub drive block were worn down smooth. Ordered the kit. Thanks for sharing this for the DIY husband!
What problem does replacing these parts solve ?
The plastic OEM ones do not hold up. These are a blessed revision hub kit . Heaven sent saving many washers and customers hard earned money. Absolutely power tools is a no no. I notice you reccomment threadlocker on the agitatorbolt. How about the large hubnut? Any threadlocker on it as well. Had one ( WTW5000DW1) loosen up while testing and it wobbled . Removed again , sure enough the large nut was loose . I retighten it with more umph. Retested wobble gone. Lots of good tips here. Seems i got a tiny leak on right side. Only on full load/highest level. I'm thinking its the air dome? Thanks
I noticed the drive block has 1 of the 6 triangular shaped tabs that is recessed more. And I also noticed the bottom part of the hub that contacts the drive block has 1 straight tab. Do any of these need to align with anything in any way to work properly? I did not receive the instruction sheet with my kit, so I want to make sure.
exelente video amigo pero cual es el motivo por el cual usted cambia esa pieza espero tus comentarios gracias
Should the wash plate move independently from the tub with power off?
Help!! The metal replacement drum kit is sold out everywhere! Is there any chance I can install a plastic one until/if the manufacturer puts out more? Mine is seriously corroded, so my impeller won’t spin.
My parts are metal similar to as shown. There are plastic parts that are similar, will those work?
13:00 Calibration thanks!
My drive shaft and agitator were rusted. They were both stripped. I cleaned them off and placed a shim in between to take up the slack. Temp. fix. still working.
thank you
Wash plate is not easy to pull out. Mines was fused to the tub. Had to break wash plate to remove it.
I had to do the same thing. When I got under it I find out you cant pull the drive hub off over the shaft to put on the new hub. Wish I can find out if I can repair this.
How do I get off a stuck hub flange.? I got the spanner nut off, but now the flange is stuck.
Can this part be used to replace the plastic drive hub part # W10528947? I have a machine that continues to strip the plastic drive hubs.
I replaced which was an easy-ish fix last year in July. Now I have the same error code.
@@marcmespelli1106 just learned resetting the washer might help. Something about unplugging for a minute then plug back in and open and close lid while holding power button 6 times might help. I am about to try it here once I am home
After taking the screws off I cannot take the drive block off. I used penetration oil too. What oil is the best to try?. It looks like corrosion.
There is not one specific penetrating oil that we prefer. If after using the oil it still doesn't break loose, then you are going to take a chisel and a hammer and carefully try to crack in half to get it off the splines. You can see this process starting at 5:42 in the video.
How do you order it
When we got to 6:10 with the "you gotta crack the nut" I folded up shop and moved the washer to the curb. My Maytag is twice as old as the one in the video, surely there are not replacement parts. There isn't even a model number to go by!
Old Maytag washers are very different from the newer ones, you made a wise decision.
@@bgrizz7253 Yeah older machines used components that were way over engineered for the applications and most of those machines could and do still run and have for decades with proper care. Today you got 4 different brands selling you the same parts inside from the same factory in china that is making them all and GE, Maytag, whirlpool, Kenmore just paint the outside up and make up marketing crap to sell you over what is essentially identical products not engineered by a reputable brand but assembled from the same parts catalog of a large subsidized Chinese factory that doesn't care if something works, as long as it looks like it might work and cant be held accountable for anything by foreign customers. Good luck filing a lawsuit for that wish product that left you a leg short made by people who have been brainwashed into hating Americans for the last 2 decades.
My drive block on there!😤 I can’t get it
how do you remove the tub?
I have this same exact model except it is so built up with scale and debris that you cannot even see the screw heads. Very bad design for a repair.
the wash plate wont budge
What are the signs that this needs replacing my whirlpool washer is just like this one and it is making a horrible grinding noise at the end of the spin cycle
Leaks, excessive vibration, and odd noises can point to a fault. Is the noise metal on metal or like a plastic-spline grind?
Sounds like metal on metal
Also when i spin the agitator manually Theres clicking noises
What is the piece you used to loosen the top nut-type part? The piece that you hit the mallet with?
Are you referring to the chisel?
@@appliancepartspros it was the spanner wrench I believe. Thanks
I ordered the drive hub for my washer, however it wont slide down on the shaft an set in place as you show it doing. I'm not sure if I can use something to tap it down? Any thoughts?
You could try making sure everything is really clean and there's no corrosion that's making it not want to slide into place, and tap it into to place. If that doesn't work, you can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/ and we'll help you figure out what's going on.
Why not pull the basket and clean out the outer tub, after doing all this work?
That definitely wouldn't be a bad idea, though this video only covers the steps necessary in the repair.
Why no threadlock on the spanner nut?
Big mistake.
Why no lock tight on threads of part? I see put on bolt part but not the other threaded items.
@champs444 Which part are you referring to?
locking nut
will this work for a Maytag bravo washer?
How do you know if it’s not agitating
Take the lid locks latch off and put it in the lid lock so you can have the lid open while its running
You do not need to undo the scanner wrench all you need to do is undo the screws around the scanner nut and lift the whole pices out in one just to save time there
Not if it's seized due to corrosion. Can't lift it up must be careful to break the corrosion in the spline and corresponding parts use a good Penetrating fluid and not WD-40,! LIQUID WRENCH OR EQUIVILENT. This is required if your removing the tub as well.
Mine is stuck. Any addvice?
Ok
Use a puller
There ain't no way I could ever fix anything wearing a pair of gloves
INSTALL ONE OF METAL AND IT LASTS FOR 45 DAYS THEY ATE THE STRETCH MARKS IT IS A FLAWY MATERIAL THAN BACK TO PLASTIC
My kit is made of plastic
Stop replacing stuff just to replace stuff
Whut
ya allah plz forgive me stop watching this.
Seriously guys, nobody needs to watch how to screw screws or plug a machine into the outlet! You exclude valuable info such as why you replace these parts or what the machine was doing to require the repair and include nonsense. Use fewer words, less video and more important details. Be professional!
first your can't buy this part. second this wash machine isn't worth the parts or labor to fix them, THEY ARE JUNK