After spending more time with my U92 thruster kit, there is not much I would change for the price. The extra plastic tubing on the thruster cables seem unnecessary. They are quiet and powerful. I really love the speed hold setting on the remote. It's perfect for trolling in a kayak as you can easily adjust the speed with the remote by like 0.2MPH +/- increments per click. For fine steering adjustments I used the existing kayak rudder as this allowed me to keep my hands free for fishing. Yet in high winds I would need to bump the controller left or right to correct my course. This was based on a 12v 100ah LiFePo4 battery setup in a 10' kayak. I did also notice interference with my fish finder sonar any time the thrusters are on. I either need to put a filter on the power wires or run the sonar off a different battery. Either way you'll be hard pressed to find a better deal on DIY kayak motors if you like to mess with the same sort of things I do.
Do you have the single thruster kit or the double I have the single and the speed controller kept overheating under normal usage I live here in Texas and put it on a paddle book that I got registered in legal and kept running into the speed controller overheating nonstop all day Using the same 12 V battery set up as you indicated
@@merlin195020 the double thruster 12-24v kit. Just got back from another trip with mine actually. No cutting out but I also don't run at full speed for more than like 10-15min at a time. Most of the time it's like 30% speed trolling. You might want to consider upgrading to some water cooled ESCs.
The outer layer of the thruster cable is very soft. You can actually pinch it out with your finger nails. I did not put mine back after discovering the convolute never really got dried inside even though it was kept near a dehumidifier! Discovered that while replacing thrusters.
A tapered exhaust cowl and stator blades would greatly increase forward thrust and efficiency with the only real cost being substantial reverse thrust performance.
Mine just arrived today. So far the quality looks great. Nice silicone wires of heavy gauge. Heat shrink is good as well. The control / ESC box is a little crowded and I wonder how well the ESCs will stay cool. Hope to test this soon on my kayak! I just need to come up with a mounting solution.
I'm wondering if these could be affixed to a type of motor mount to drop in the rear of a large fishing kayak. I have a PA 17 72lbs of thrust would be nice.
Interesting idea. I was thinking this setup would be a good modification to my old SportsPal 15 foot aluminum canoe instead of a regular trolling motor. I'm not sure 40lbs of thrust would be sufficient without also using the paddles or oars.
@@underwaterthruster Hello I'm unsure on your conversion numbers here. I know every application on a kayak or canoe would be different as all are different weights and resistance in water. So you only recommend this up to 200kg or roughly 440 lbs of weight?
@@surfdogvacationrentals5207 We recommend to use it under 0-200Kg weight, and don't exceed 300Kg maximum, because too heavy will affect the propulsion speed.
These worked great on a 10' kayak with a 12v battery. I expect you would be quite happy on a 14' canoe. The brushless motor efficiency is a notable improvement over classic brushed trolling motors.
Enough. If you are worried that it is not enough, you can try our AQ1020 (48V) with two thrusters with a total thrust of 48Kg, which can push 800Kg. www.underwaterthruster.com/products/apisqueen-aq1020-12-50v-all-metal-underwater-thruster-10-20kg-thrust
I bought the U92 single product review My wife and I went out yesterday July 1st 2023 After only 5 minutes of usage at medium power the speed controller kept overheating so I decided to put it underneath where it was in the shade this does not resolve the issue at high-speed I got 3 minutes before cutting out for 5 and then cutting back on continuously throughout the day I ended up having to wrap a wet shirt around it and use a bag of ice to keep it cool enough to use and it still hardly worked the unit needs to be upgraded to a higher heat sink or something maybe add a fan If I don't hear back from the manufacturer I will be taking this thing apart hacking it and updating later!
Has over-temperature protection. In addition, you need to pay attention to the battery's continuous operating current. If the battery's continuous operating current is very small, it will trigger the battery's overcurrent protection. In 2024 we will launch a version with a fan.
Official website: www.underwaterthruster.com Lazada:www.lazada.com.my/products/i3881151324-s22452477344.html?spm=a1zawi.23708326.d_order_item_list_expand_0.1. 77734edf3MkJ1G&urlFlag=true&mp=1
Hi, I'm waiting for the shipment of the 12v 300Kv two pusher sets I bought. I will use only one person on the inflatable canoe. The canoe is 20 kilos and I am 90 kilos. What kind of battery should I use for this system to take me 4 hours at medium speed. Can you write the battery and its specs?
12V lithium battery, battery continuous operating current greater than or equal to 100A. If you do not use it under continuous maximum throttle and use it for 4 hours, it is recommended to buy a 200AH/300AH battery.
I have been using mines for the last month... never get tired of using them... the quality is really good!
Tested on a Hobie Compass Mirage (12ft)
thank you
After spending more time with my U92 thruster kit, there is not much I would change for the price. The extra plastic tubing on the thruster cables seem unnecessary.
They are quiet and powerful.
I really love the speed hold setting on the remote. It's perfect for trolling in a kayak as you can easily adjust the speed with the remote by like 0.2MPH +/- increments per click. For fine steering adjustments I used the existing kayak rudder as this allowed me to keep my hands free for fishing. Yet in high winds I would need to bump the controller left or right to correct my course.
This was based on a 12v 100ah LiFePo4 battery setup in a 10' kayak.
I did also notice interference with my fish finder sonar any time the thrusters are on. I either need to put a filter on the power wires or run the sonar off a different battery.
Either way you'll be hard pressed to find a better deal on DIY kayak motors if you like to mess with the same sort of things I do.
Do you have the single thruster kit or the double I have the single and the speed controller kept overheating under normal usage I live here in Texas and put it on a paddle book that I got registered in legal and kept running into the speed controller overheating nonstop all day Using the same 12 V battery set up as you indicated
@@merlin195020 the double thruster 12-24v kit. Just got back from another trip with mine actually. No cutting out but I also don't run at full speed for more than like 10-15min at a time. Most of the time it's like 30% speed trolling. You might want to consider upgrading to some water cooled ESCs.
The outer layer of the thruster cable is very soft. You can actually pinch it out with your finger nails. I did not put mine back after discovering the convolute never really got dried inside even though it was kept near a dehumidifier! Discovered that while replacing thrusters.
A tapered exhaust cowl and stator blades would greatly increase forward thrust and efficiency with the only real cost being substantial reverse thrust performance.
Mine just arrived today. So far the quality looks great. Nice silicone wires of heavy gauge. Heat shrink is good as well. The control / ESC box is a little crowded and I wonder how well the ESCs will stay cool. Hope to test this soon on my kayak! I just need to come up with a mounting solution.
During operation, if the temperature of the ESC becomes too high, it will trigger our overheating protection to ensure safe use.
Have you tested it on the water? Can you share your thoughts?
@@tolgakaya2825 Actually I hope to test them tomorrow
@@sethalump did you test it?
@@tolgakaya2825 hopefully soon, I will report back
Wouldn't having them built into the base have less drag and such push turbine effect?
great share
How well would these work in a river where you may face rocks??
I'm wondering if these could be affixed to a type of motor mount to drop in the rear of a large fishing kayak. I have a PA 17 72lbs of thrust would be nice.
Yes, it's perfectly fine, you can mount the thrusters on the bracket.
How much are they to buy? Amazon?
Hola, ¿se puede instalar en un pato de pesca "float tube"?. Gracias!!!
Interesting idea. I was thinking this setup would be a good modification to my old SportsPal 15 foot aluminum canoe instead of a regular trolling motor. I'm not sure 40lbs of thrust would be sufficient without also using the paddles or oars.
It can push 200Kg.
If you don't think it's enough, you can consider our AQ1020, 2 AQ1020's have 48*2=76lbs of thrust.
@@underwaterthruster Hello I'm unsure on your conversion numbers here. I know every application on a kayak or canoe would be different as all are different weights and resistance in water. So you only recommend this up to 200kg or roughly 440 lbs of weight?
@@surfdogvacationrentals5207 We recommend to use it under 0-200Kg weight, and don't exceed 300Kg maximum, because too heavy will affect the propulsion speed.
These worked great on a 10' kayak with a 12v battery. I expect you would be quite happy on a 14' canoe. The brushless motor efficiency is a notable improvement over classic brushed trolling motors.
Wonder if these would be enough to power my Sea Eagle 285 and mount these on the pontoons.
Enough. If you are worried that it is not enough, you can try our AQ1020 (48V) with two thrusters with a total thrust of 48Kg, which can push 800Kg.
www.underwaterthruster.com/products/apisqueen-aq1020-12-50v-all-metal-underwater-thruster-10-20kg-thrust
Wich type of battery should be used for your Pisqueen 24 v kit ? Should I look for any amperage ?
24V battery with continuous operating current greater than or equal to 100A.
so what speed is it going to give me to kayak and how big raft for a battery do I have to tow behind?
5-12Km/h. 24V 100AH
Hey, i just got my set and i was wondering what type of battery shall i buy to operate the thrusters
Could you please recommend me a specific type of battery to use it on the thrusters?
@@hamadbawazir4972 I use this one, bought in Aliexpress, received it in less than 2 weeks in the US
I got a 100ah 12v LiFePo4 battery and it worked great. Lots of capacity and they're like half the weight of a deep cycle lead acid battery.
The speed controller overheats heats continuously!!
Do you have to proved your own battery pack?
Our sets do not include batteries because international logistics for shipping batteries are very difficult.
@@underwaterthruster what battery do I need for the 24v
I bought the U92 single product review
My wife and I went out yesterday July 1st 2023 After only 5 minutes of usage at medium power the speed controller kept overheating so I decided to put it underneath where it was in the shade this does not resolve the issue at high-speed I got 3 minutes before cutting out for 5 and then cutting back on continuously throughout the day I ended up having to wrap a wet shirt around it and use a bag of ice to keep it cool enough to use and it still hardly worked the unit needs to be upgraded to a higher heat sink or something maybe add a fan If I don't hear back from the manufacturer I will be taking this thing apart hacking it and updating later!
Has over-temperature protection.
In addition, you need to pay attention to the battery's continuous operating current. If the battery's continuous operating current is very small, it will trigger the battery's overcurrent protection.
In 2024 we will launch a version with a fan.
where can i purchae? bcs i asked at lazada, and ali express there are no response
Official website: www.underwaterthruster.com
Lazada:www.lazada.com.my/products/i3881151324-s22452477344.html?spm=a1zawi.23708326.d_order_item_list_expand_0.1. 77734edf3MkJ1G&urlFlag=true&mp=1
como quê eu faço prá conprar este motor eletrico
Should sell ear plugs with them. Loud enough to wake the dead.
This is just the sound of friction with air, very quiet in the water. It is used in water.
where did you both it?
www.underwaterthruster.com/products/apisqueen-u92-upgrade-kit-12v-24v-40lbs-thrust-for-inflatable-boats-kayaks-etc
How much is the thing?
www.underwaterthruster.com/products/pisqueen-24v-12v-two-u92-set-underwater-thruster-with-waterproof-remote-control-for-kayaks-inflatable-boats-paddle-boards-etc
Water test
Hi, I'm waiting for the shipment of the 12v 300Kv two pusher sets I bought. I will use only one person on the inflatable canoe. The canoe is 20 kilos and I am 90 kilos. What kind of battery should I use for this system to take me 4 hours at medium speed. Can you write the battery and its specs?
12V lithium battery, battery continuous operating current greater than or equal to 100A.
If you do not use it under continuous maximum throttle and use it for 4 hours, it is recommended to buy a 200AH/300AH battery.
@@underwaterthruster thanks
Perfect for drying kleenex
Put it in The water let us see it run in water
We will update the video in the water soon.