Ecto Gets 12mm Hex Extensions How To Modify Free!!!
Vložit
- čas přidán 5. 09. 2024
- hey guy's I put 12mm hex extensions on took a gamble what would work but you have to modify them I show you how to do that for free
Buy Element Ecto RC Crawler Here: amzn.to/36IiWza
Buy Axial Wheel Extension Here: amzn.to/3wx9WrI
All links are affiliate links and do provide a small commission at no extra cost to the buyer.
#elementecto #rccrawler #rccar
Nice video brother I did hex extensions on my ecto I ordered 15mm long 12mm brass extensions added a bit of weight also I like to use tap oil when I drill tried it one day because I had a dull bit and it really did a good job now I do it all the time lol the extensions are a great mod on the ecto you could always star cut the foam it will help flatten out the foot print great rip test
That's an interesting thought actually Brent I've often ponderd cutting or reducing the foam to increase tyre's depression I might have to run this test again with the swampers there slightly smaller and very soft foam and tyre plus there on beadlocks cheers bro 👊👍💯
Going to have to get some extenders myself. Tires rub the shocks at full lock.
Absolutely worth the investment they're are very cheap improves stability, side hill angle and fixes that low steering rake issue rubbing on the shocks I used the same ones for an axial SCX10II thank you for watching and commenting very appreciated sorry for the late reply had an unforeseen phone service internet issue over the weekend 👊
Nice the wider the better lol.
Well to certain point!
Great shop video!
Absolutely still needs to fit through the gaps but some extra stability is always good 👊👍💯
Thanks for sharing 👍
Just ordered 15mm for my element knightrunner hopefully it's going to work.
Good luck mate they are definitely worth it I used the same one's that fit axials thank you for watching and leaving a comment 👊
thanks. got it! so thats how its mounted.
Glad I could help thank you for watching and commenting very appreciated 👊
Cool extensions and video
Cheers bro I always think I don't do these one's very well cause I don't do two things at once very well lol 👊👍💯
@@rcuintheshed6981 😁👍
awesome little mod dude, im now wondering if this would fit more cars!
I think it would for sure not sure how it would go bashing or to fast though 👊👍💯
Great Video Brother
Cheers big fella hope your doing well mate 👍👊💯
good video💯👍🏽
Thank you so much 👊👍💯
So stable
I could only imagine one person would be willing to test this in real life and probably get away with it 🤣
Hi mate good vid I just ordered some of these in 15mm width. What's the width of yours? Also prior to this I have ordered some brass wheel weights that look like disk brakes but in 6mm so will they still fit if i fit these new 12mm hex adapters? Cheers
These are 15mm aswell they will come with a female wheel nut so even if they extend past the axle thread you'll be ok are you fitting beadlocks I believe without seeing them the disc brake weights mount to the inside of the beadlock so the hex extensions should be even more of a help thank you so much for watching and commenting very appreciated hope this helps 👊
@rcuintheshed6981 Brilliant mate I really appreciate your insight as I'm a new ecto owner and new to crawling so just getting my head around all the terminology and mods . Cheers!
You are so welcome bro everyone is appreciated on this channel it's awesome to hear people getting into the hobby you won't be disappointed with the ecto excellent purchase
@rcuintheshed6981 Hell yeah that's my performance rig. I've also got a SCX10III Early Bronco with some mods. You can see some running vid on here. Cheers
I'll check it out