Another educational video. Excellent as always and glad the Key Tool Max & Dolphin still performing well. By the way I went and bought the Dolphin like you said and I'm very happy with it. Muchas Gracias Amigo :)
Hi Mike, on one video you said you had some problems ? with the xhorse OBD tool was it certain vehicles that it didn't like, i'm thinking of buying the key tool max with the OBD . Thanks
The dolphin has a feature built in to decode a original key and get the keycode from it, however their is no subscription for it. However should you use a outside site they will have subscriptions
Wondering, could you have decoded the locks with lishi tools instead of pulling the door panel lock? Also thank you for uploading. Your videos have been amazing
Do you think the Autel IM508 + Xhorse Dolphin Portable Cutter + Key Tool MAX for 3K is a good starting point to do this as a side hustle? just programming and cloning keys while I learn? thanks
Hello member and thank you for joining our members only club! your message will now be answered with full priority! Yes i do think thats a great combo becuase later on after you learn advance programming u can add xp400 pro to the im508 tablet,but to me if your barely starting up i recommend you stick to the autopropad basic for all your domestic and asian vehicle key programming its really user friendly and really easy to use and program keys! ..dolphin key cutter yes! key tool max yes ,you definitelyare going to need that! yes your on the right track!
Hello, I tried to duplicate key for 2014 Chevy Silverado. There was not an option on Condor mini duplicate via vehicles database so I tired via Internal 4 track channels. Key works on door but not on ignition. Than I tried on 2014 GMC Sierra option on condor mini, I was able to read biting and cut key still open lock/unlock doors but not working on ignition. It is 10 cut key. Have you experienced anything like this before?
@@MYKEYSAUTOMOTIVE no it doesn’t have a battery feature, I got a van from a fleet sale from Johnson Controls and luckily it has a 2000 watt inverter professionally installed 🙏
@@MYKEYSAUTOMOTIVEthanks for the reply. Just a general question. It looked like a toy43 key to me. Did the handle make it hard to insert a lishi in fully? I've had that with a trunk lock before.
@@ericptjones tbh i only lishi a ignition to remove it but never really lishi a door because I usually find the code on the passenger or take the cylinder apart
@@MYKEYSAUTOMOTIVE I use instacode to help fill in the missing wafers from the door. My lishi doesn't do the ignition. I might have to invest in one now that does all wafers. Thanks again. Get some sleep. You've had a long day 😊
I have a question can you do a video on how to remove the ignition cylinder and install a new one ? and will the xhorse machine create all lost keys for all cars ?
I have had that issue on newer tundras... I usually just dismantle the door lock cylinder!! And thank you jinxxpwanage for always helping out each other!!
hola👋🏽 saludos amigo! para comentar con prioridad, ¡únase a nuestro grupo exclusivo para miembros! desde una computadora de escritorio o portátil al lado del botón de suscripción, verá el botón para unirse. ¡gracias! 🙏🏼🙏🏼❤️❤️
Hello greetings! 👋🏽👋🏽For priority commenting please join our members club! Next the subscribe button from a laptop or desktop you will see the join button!! Thank you!🙏🏼🙏🏼❤️❤️❤️
Thank you very much for helping me😉, I am still learning to know the car and motorbike immoblizer program I am an ordinary locksmith, I don't use an immobilizer & I want to be better in my business with an immobilizer program😊
Your not suppose to decode by universal decode!! Always by vehicle data base!! Also you need to recalibrate your machine!! Height level adjustment ,Cutting adjustment, and clamp adjustments
My machine does not let me get the code it always says request failed try again later what can be the problem I’m connected to the internet and everything is good but idk what is wrong
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Hola saludos 👋🏽 Amigo! para comentar con prioridad, ¡únase a nuestro club de miembros! ¡una vez que se una, también participará para ganar nuestro sorteo mensual! Si desea unirse, puede unirse desde una computadora portátil o computadora al lado del botón de suscripción, ¡verá el botón de unirse! ¡gracias! 🙏🏼❤️
Hi Mike. I have learnt a lot from you and will be buying the Key Tool Max & Dolphin. I will also Cashapp you today. You actually deserve more. If you have a referral link for Key Tool Max & Dolphin i can use it. You should have tho, cause some of us are buying because you are using it.
@@MYKEYSAUTOMOTIVE Which programmer would you recommend between these three if I have to buy one that will go a long way. #VVDI Key tool Plus #Autel IM608 Pro #Auto pro pad Can Autel tool work with Xhorse Dolphin cutter? Thank you
@@washingtonstreet4389 def Autel im608pro !! The autel can do everything the key tool plus can do and more!! The autopropad has the capacity to do asian and domestic vehicles with flying colors.. out does the autel im608 pro when it comes down to asian and domestic however the autel im608 dominates the competition when it comes down to European high end luxury vehicles!!
Another educational video. Excellent as always and glad the Key Tool Max & Dolphin still performing well. By the way I went and bought the Dolphin like you said and I'm very happy with it. Muchas Gracias Amigo :)
Thank you Johnnie!! Nicee, Im very glad your happy with your purchase i love it too!!!! Take care!!
@@MYKEYSAUTOMOTIVE is xhorse panda perform well as dolphin?
@@John-kb9im I believe the only difference is the size
@@MYKEYSAUTOMOTIVE thanks brother 😁
@@John-kb9im no problem!
Bueno bueno buenísimo. Gracias por estos tutoriales. Saludos desde New York City...
Hola Omar saludos amigo!
Exelente video cada día se aprende algo nuevo muchas gracias x compartir tus conocimientos
Gracias a ti Jorge!!
Nice Job Mike thank you for making and sharing video, what would a job like this typically cost for a customer?
Thank you for this educational videos.
Thank you im Glad you liked them!
Would you still recommend xhorse 500 or newer version xhorse 500L ?
Hi Mike, on one video you said you had some problems ? with the xhorse OBD tool was it certain vehicles that it didn't like, i'm thinking of buying the key tool max with the OBD . Thanks
Its a nice little starting tool
Bilingual love it thank you brother!
Thank you brother glad u liked it!
gracias BRO!!! muy educativo !
Gracias Jorge bendiciones!!
Gracias mike buen trabajo
Sigo aprendiendo de tus videos
Bendiciones hermano
Gracias hermano bendiciones!!
It's Wonderful.thank you
Thank you glad u liked it!
Excelente amigo gracias por compartir
Gracias a ti ! Dios te bendiga
Excellent as always
Thank you I appreciate your comment!
Cant you use a lishi if the ignition lock was changed?
Hermano muy bueno tu video! Muchos éxitos para ti!
Gracias amigo!!
Do you have to pay a subscription for getting the key codes from the Dolphin or are they built into the computer's memory?
The dolphin has a feature built in to decode a original key and get the keycode from it, however their is no subscription for it. However should you use a outside site they will have subscriptions
Good movie my friend. Thanks to you I bought Dolphin 005.Greetings Adam Poland
Good choice Adam!! Best of luck to you my friend!
Thank you Pariente! Al 💯
Gracias amigo! Bendiciones!
Excelente 👍🏻
Thank you🙏🏼🙏🏼💯💯❤️❤️
Muy buen video Mike, gracias 🙏
Gracias a ti amigo!! Bendiciones!!
excellent!!
Thank you David glad you liked it!!
Can you use an endoscope with a 90 degree mirror to look in the hole as the side of the door and read the code rather than taking the door apart?
well the thing is that sometimes dirt,muck or greese cover the numbers and you have to wipe it clean .. so no that still wouldnt help i tried that
Una pregunta bro después q metes el código de la chapa en la makina te da algún otro code?
Wondering, could you have decoded the locks with lishi tools instead of pulling the door panel lock?
Also thank you for uploading. Your videos have been amazing
Yes you can!
How much did u charge and how many hours did this take ?
Great Video I got a Question I got a tool max pro and do you think is possible program a jeep 2019 Cherokee Fob from Amazon non xhorse brand
Yesss definitely
But will need gateway cable
@@MYKEYSAUTOMOTIVE Thank you that's the cable the goes on the security port right no on the obdII port
Exelente muy buenos videos para Toyota Hilux como sería el procedimiento mil gracias
Bien parecido!
Do you think the Autel IM508 + Xhorse Dolphin Portable Cutter + Key Tool MAX for 3K is a good starting point to do this as a side hustle? just programming and cloning keys while I learn? thanks
Hello member and thank you for joining our members only club! your message will now be answered with full priority! Yes i do think thats a great combo becuase later on after you learn advance programming u can add xp400 pro to the im508 tablet,but to me if your barely starting up i recommend you stick to the autopropad basic for all your domestic and asian vehicle key programming its really user friendly and really easy to use and program keys! ..dolphin key cutter yes! key tool max yes ,you definitelyare going to need that! yes your on the right track!
@@MYKEYSAUTOMOTIVE Thanks
Good to see you back.
Khurram thank you ! Good to be back!!
Hello,
I tried to duplicate key for 2014 Chevy Silverado. There was not an option on Condor mini duplicate via vehicles database so I tired via Internal 4 track channels. Key works on door but not on ignition. Than I tried on 2014 GMC Sierra option on condor mini, I was able to read biting and cut key still open lock/unlock doors but not working on ignition.
It is 10 cut key.
Have you experienced anything like this before?
Thanks MIKE very good
Glad you enjoyed it
Can you please do video on reading pin code from EEPROM for older dodge caravan (2004-2007)?
Yes sir!!
Nice
Thank you brother!!
Hey Mike! What yr did toyota start using transponders?
It all depends brother every toyota is different some started as early as 98 and some as late as 2005-2006 even later like tacoma and Corolla
quick question Mike, what are your thoughts on the Condor XC- mini plus for a strictly mobile business?
I like the condor xc ! Has a good software more advance options than the dolphin its nice
@@MYKEYSAUTOMOTIVE you don’t think I can damage it being inside a van?
@@archipiota1 strap it down.. and your going to need an inverter.. i dont think its battery powered
@@MYKEYSAUTOMOTIVE no it doesn’t have a battery feature, I got a van from a fleet sale from Johnson Controls and luckily it has a 2000 watt inverter professionally installed 🙏
@@archipiota1 niceee!!
Experience diagnosis. Y trabajo amigo. Una pregunta porke se tienes ke remover Los cilindro de puerta
Para obtener el codigo de llave 🔑
Ok. Grasia. Amigo
buen dia Mike, buenisimo el video!
Gracias amigo!!
Muchas gracias Mike por el video.como siempre se aprende mucho.
se puede sacar un llave del vin nr del coche?
Si es original la llave y no cambiaron el switch si pero no requiere..si lo puedes sacar de la puerta..
Would you recommend using the lishi to decode these rather than removing the cylinder?
Wich model and year?
@@MYKEYSAUTOMOTIVEthanks for the reply. Just a general question. It looked like a toy43 key to me. Did the handle make it hard to insert a lishi in fully? I've had that with a trunk lock before.
@@ericptjones tbh i only lishi a ignition to remove it but never really lishi a door because I usually find the code on the passenger or take the cylinder apart
@@MYKEYSAUTOMOTIVE I use instacode to help fill in the missing wafers from the door. My lishi doesn't do the ignition. I might have to invest in one now that does all wafers. Thanks again. Get some sleep. You've had a long day 😊
Hey bro do a honda used remote needs to be renewed.. ? . If so how do you do it . It's an 2015 honda accord.. its a smart key/ proximity
You dont need to renew
@@MYKEYSAUTOMOTIVE for the love of me I can't seem to get this key program to the car .. its a genuine key.. (oem) using key tool max
@@MrBchott what steps are you doing?? Ill check in the morning for you.. its 2am where i am..
What if the customer wants the one with remot !? Thank you
Muchas gracias por todos tus videos amigo , el autopropad y el im608 crees que es una buena combinación ?
Sii muy buena combinación!! Uuf ,yo tengo los dos!! Pero yo tengo el im608pro
@@MYKEYSAUTOMOTIVE muchas felicidades amigo por tu equipo, yo voy empezando en esto, espero comprarlo pronto!!
@@sergioRodriguez-nu2js gracias amigo !! Y suerte !! Bendiciones!!
@@sergioRodriguez-nu2js gracias amigo !! Y suerte !! Bendiciones!!
Hi Mike Long time no see! Nice video again, hope you everything goooood!!
Cooper!! thank you !! Hope all is good with you!! Take care my friend!!
Hey man, does this VVDI Decode Chevy’s, and can you cut the keys with a Pak a Punch?
No
@@MYKEYSAUTOMOTIVE yeah It doesn’t throw the cuts unless you have the Dolphin connected
I have a question can you do a video on how to remove the ignition cylinder and install a new one ? and will the xhorse machine create all lost keys for all cars ?
Its similar to the tundra video i have ! Check it out!
@@MYKEYSAUTOMOTIVE thanks I will search for that video now. 👍🏾
Bravo
Thank you sir!🙏🏼
buenastardes en la key tol max donde se guarda la informacion del corte
In my country there's no key code for newer Toyota models in the passenger lock and the drivers lock where cant it be ?
Try the glovebox lock
I have had that issue on newer tundras... I usually just dismantle the door lock cylinder!! And thank you jinxxpwanage for always helping out each other!!
Es necesario que esté conectado a Internet ! Para funcionamiento ?
Mike, yo compre el IM508 pero me dicen que el IM608 es mejor, tu crees que deberia vender mi IM508 y comprar el IM608? Gracias
hola👋🏽 saludos amigo! para comentar con prioridad, ¡únase a nuestro grupo exclusivo para miembros! desde una computadora de escritorio o portátil al lado del botón de suscripción, verá el botón para unirse. ¡gracias! 🙏🏼🙏🏼❤️❤️
Gracia por. el videos que dios te de salud
Gracias amigo igualmente Dios te bendiga a ti y tu familia!
Thank you so much
Thank you brother God bless you!
Where is your country?
My friend
@@engelparvas7066 usa
@@MYKEYSAUTOMOTIVE Thank you
@@engelparvas7066 thank u
Buen día, muy buen video, que tal le parece el nuevo equipo que sacó xhorse? El key tol plus
Todavia no lo tengo amigo !! Pronto!!
Goood
Thank you
oh yeah instead of dismantling the door can you decode the lock with a lishi pick ?
Yes
Très bon travail bravo juste je vous demande svp ou je peux trouver le code de clé dodge nitro car j'ai perdu les miens merci beaucoup de la France
Only lishi!!
or is the dismantling of the door a quicker option ?
Door is quicker
@@MYKEYSAUTOMOTIVE thanks
i got keys that work, vhl turns on but shuts off, immobilizer kicks in 2012 terrain, gm found out it is a flooded vehicle!
Dang sorry to hear that!
Por que usaste una lishi tool es por algo en especial ?
No use lishi
where can I buy a Mercedes w211 blank fob key?
Hello greetings! 👋🏽👋🏽For priority commenting please join our members club! Next the subscribe button from a laptop or desktop you will see the join button!! Thank you!🙏🏼🙏🏼❤️❤️❤️
Hola que tal buen Día. Oye cuando harás los cursos que habías comentado hace tiempo.
Cursos de cuales amigo!!??
@@MYKEYSAUTOMOTIVE habías dicho en un video que pronto estarías dando información para los cursos sobre las llaves.
Hola amigo consulta la cortadora de llave xhorse dolphin solo es para llaves de vehiculos corta para motos?
Gracias saludos desde Chile
👍
What year is this?
ESTAMOS ESPERANDO LOS VIDEOS DE BMW AUDI VW ETC..
Amigo ya viene uno de bmw!!! Aguanta!!
Primo, why didn't you use a Lishi tool to get the code instead of removing the door panel which seems to be a lot more work primo.
What you do when the code is wrong or their no code it's happened to me with sequoia?
Hello greetings! For priority commenting please join our members only!! Thank you!!🙏🏼🙏🏼❤️❤️
@@MYKEYSAUTOMOTIVE how?
hi I want to ask if the jmd chip will be detected in the vvdi program, please help answer😊
Probably not
@@MYKEYSAUTOMOTIVE okey thank u👍😊
@@RikyRizky i will look more into it and ill let you know ok!
Thank you very much for helping me😉, I am still learning to know the car and motorbike immoblizer program I am an ordinary locksmith, I don't use an immobilizer & I want to be better in my business with an immobilizer program😊
Does this tool tell you where to fund the code?
No sorry
What does it mean when it says the key is a fixed code do you have any videos
I'm thinking it's means a dealer key?
Its like a rolling code
Like bmw
When I use the trace key option the machine keeps breaking my tracers it is that a mechanical issue?
Your not suppose to decode by universal decode!! Always by vehicle data base!! Also you need to recalibrate your machine!! Height level adjustment ,Cutting adjustment, and clamp adjustments
Also the dolphin works by conductivity. It's possible the key your tracing is no conductive?
I traced hundreds of keys but for whatever reason yesterday it snapped all my tracers even after calibrating the last one
@@redfoxx1417 did you ever figure out why it was breaking your probes???
@@pouncerminned863 yea I just cleaned it as well as I could calibrated it turned it on off on off then cut a key regular then traced it
My machine does not let me get the code it always says request failed try again later what can be the problem I’m connected to the internet and everything is good but idk what is wrong
You need to have wifi and be connected via Bluetooth... also if your entering a wrong code it will say that!
@@MYKEYSAUTOMOTIVE I updated it rn through my pc and it works perfect now thank you anyways for the info
@@imdondada7005 nice okay good job!
What year model do you mean by newer?
Corolla camery scion maybe over 2006 and up
How much you bought these machine ? And which wholesale ?
Join our channel for questions please thank you
Hey how do you read a lock code I mean in which order.
Hello greetings please join our members club for priority commenting!! Thank you! ❤️🙏🏼
@@MYKEYSAUTOMOTIVE how don’t join the group?
Mas respect for the locksmith Paisa
Thank you bern!
HERMANO SE OCUPA INTERNET PARA TRABAJAR ES MAQUINA ?
Si ya se acupa
Hay algun programa o algún manual que te diga donde está el código para cada modelo de vehículos
Michael hayde book
@@MYKEYSAUTOMOTIVE donde lo puedo comprar
@@wilbercastro9641 locksmithkeyless.com or uhshardware.com
Did you steal my Dolphin and Key Tool Max? 😆
What do you mean?😆
@@MYKEYSAUTOMOTIVE Great Video!
@@wattvoltamp thank you
Hello sir,what is that name machine? Ang how much? From baler aurora Philippines
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
No se puede sacar el código con un lishi?
Hola saludos 👋🏽 Amigo! para comentar con prioridad, ¡únase a nuestro club de miembros! ¡una vez que se una, también participará para ganar nuestro sorteo mensual! Si desea unirse, puede unirse desde una computadora portátil o computadora al lado del botón de suscripción, ¡verá el botón de unirse! ¡gracias! 🙏🏼❤️
How much do you charge for this
Depends what country state?
Can we find the key code on the internet?
No sorry
Hi Mike. I have learnt a lot from you and will be buying the Key Tool Max & Dolphin. I will also Cashapp you today. You actually deserve more.
If you have a referral link for Key Tool Max & Dolphin i can use it. You should have tho, cause some of us are buying because you are using it.
Thank you David I appreciate you !! I have replied to your email!! Thank you once again God bless you!!
@@MYKEYSAUTOMOTIVE You are the Man!
@@washingtonstreet4389 no you are the man!!😄😄
@@MYKEYSAUTOMOTIVE
Which programmer would you recommend between these three if I have to buy one that will go a long way.
#VVDI Key tool Plus
#Autel IM608 Pro
#Auto pro pad
Can Autel tool work with Xhorse Dolphin cutter?
Thank you
@@washingtonstreet4389 def Autel im608pro !! The autel can do everything the key tool plus can do and more!! The autopropad has the capacity to do asian and domestic vehicles with flying colors.. out does the autel im608 pro when it comes down to asian and domestic however the autel im608 dominates the competition when it comes down to European high end luxury vehicles!!
Don't leave the Dolphin in the car the customer will not give it back......ijs
🤣🤣🤣 cant forget the dolphin
Couldn't you have just picked it with a lishi
Hello for priority commenting please join our members only! thank you!
Damn bro you got to go see a doctor. Yeah out of breath
Cuanto se cobra por un trabajo de esos
Depende que estado vives!!?
@@MYKEYSAUTOMOTIVE California
160