Rob North Bsa rocket3 750cc P&M at donington classic bike festival crmc parade,

Sdílet
Vložit
  • čas přidán 8. 09. 2024
  • Me riding a 1972 Rob North BSA Rocket3 race bike at the Donington park classic bike festival 2016,
    It is a fully P&M built 750cc engine running a 11lb crank and 12-1 compression ratio, for full spec please ask.

Komentáře • 21

  • @johnvanstone5336
    @johnvanstone5336 Před rokem +2

    What a glorious sound, absolutely stunning !

  • @quietknight8250
    @quietknight8250 Před 3 lety +5

    Man! It sure says a lot when every single guy on the circuit wants to hear the BSA go by!

  • @kevinmoor26
    @kevinmoor26 Před 5 lety +16

    I was riding a Z1 at a track-day when this bastard three cylinder BSA blew my leathers off. Say what you like, these pushrod museum relics were REALLY fast.

    • @pbysome
      @pbysome Před 5 lety +1

      About the same HP but a lot less weight

    • @martinburke362
      @martinburke362 Před rokem

      With high gearing about 165mph with the short gearing 155mph

  • @JamesRyan-ql9lr
    @JamesRyan-ql9lr Před 20 dny +1

    Good to see it being ridden properly 👍🏻👍🏻👍🏻

  • @exb.r.buckeyeman845
    @exb.r.buckeyeman845 Před 2 lety +2

    The great Percy Tait, Triumph road tester, loved these push rod triples.

  • @stephenanderson4603
    @stephenanderson4603 Před 2 lety +1

    Missing the puff of blue smoke on the over run😉 absolutely gorgeous!!

  • @03bonneville
    @03bonneville Před 2 lety +2

    Sweet music to my ears.

  • @ronanrogers4127
    @ronanrogers4127 Před 3 lety +3

    Beautiful sound. This and the Honda 6 are just amazing.

  • @gregallen7586
    @gregallen7586 Před 5 lety +4

    Beautiful Noise! Awesome!

  • @classicraceruk1337
    @classicraceruk1337 Před 3 lety +3

    I rode a Triumph version during a parade at Brands Hatch in 1989 that was owned by Ozzy. I was racing a 250 Ducati at the time, I tell you what I have never seen the top straight at Brands into Paddock Hill bend disappear so quickly. I actually had to brake for Paddock unheard of on the little Ducati. Decided it was to quick for me as I had only been racing a year. I think the cost of crashing put me off as well!!!!

  • @lumberjack4987
    @lumberjack4987 Před 7 lety +1

    this reminds me of my Slippery sam rep the sound is just awesome :)

  • @bcpatterson012
    @bcpatterson012 Před 13 dny

    Would prefer front facing camera from the start...great video anyway..

  • @dongray6583
    @dongray6583 Před 8 lety +3

    Nice!

  • @vincentgauthier2030
    @vincentgauthier2030 Před 4 lety +1

    Nice to see and hear some throttle. What are the hp and torque numbers?

  • @Angela-us2kv
    @Angela-us2kv Před 7 lety +1

    Is it a P&M frame? and are you running a six speed box?

    • @T16dozza
      @T16dozza  Před 7 lety +1

      Angela Edge, it's a miles engineering frame and the bike was built by P&M, it's running a 5 speed box but after racing it this year I would like to change to a six speed for next year.

  • @JARRETT7121
    @JARRETT7121 Před 7 lety +1

    how fast does she run on the strait!?

    • @T16dozza
      @T16dozza  Před 7 lety +2

      JARRETT7121 I'm not sure as only have a rev counter, fast enough to keep me grinning

    • @Stalicone
      @Stalicone Před 2 lety

      Stock, that bike will do just around 140. The 3 was the fastest production bike in the world when it was introduced.