Wasn’t 25’ away… you’d think there would be defined measurements on the alignment 5-10’ away where most people have access to. The alignment on these are not good in my opinion. I have take two attempts and the high beam is still a million miles in the sky unless I got a bad light…
Hey this is Pete, I run this account for Lifestyle Cycles. If you are local, then you can bring your bike to our shop and out guys in service can help you with that.
@@LifestyleCycles_ It's a RF system. Looks like i have to put a 5/8" spacer behind the bracket to get the light out past the AMP. Not sure how that's going to make the light look with the front fairing on.
Yes, the Rockford Fosgate amplifier is problematic for these lighting systems. We have had to modify the lights and bulkhead mount in the past to make it work.
@@LifestyleCycles_ I just installed my lights yesterday. I added 5/8" spacers behind the mount in 4 spots where the screws fit and i had to take off the weather stripping at the top of the trim piece. Seems to work.
@@user-nv1dk9ex1f I've only had them installed for 3 weeks. I took a 3000KM road trip in the States. Washed my bike when i got back and noticed they were not smooth anymore. CD are working with me which i appreciate.
I was really hoping u would pan over and show that light pattern on that red tape line 😢
Wasn’t 25’ away… you’d think there would be defined measurements on the alignment 5-10’ away where most people have access to. The alignment on these are not good in my opinion. I have take two attempts and the high beam is still a million miles in the sky unless I got a bad light…
Hey Kevin, nice video. Do you know of a good replacement for one of the brass inserts? One of mine spun loose on my windshield on my road
Hey this is Pete, I run this account for Lifestyle Cycles. If you are local, then you can bring your bike to our shop and out guys in service can help you with that.
How heavy are the lights, can you feel a difference while riding?
I checked today and they are 11.6lbs for the entire kit.
The lights are 11.4 pounds. Didn't notice a difference on a 850 pound bike.
Anybody come up with a fix when youre running an AMP under the fairing. the lights wont fit properly
Depends on what you are running? The amplifier kits that we use fit with the Shark Demon.
@@LifestyleCycles_ It's a RF system. Looks like i have to put a 5/8" spacer behind the bracket to get the light out past the AMP. Not sure how that's going to make the light look with the front fairing on.
Yes, the Rockford Fosgate amplifier is problematic for these lighting systems. We have had to modify the lights and bulkhead mount in the past to make it work.
@@LifestyleCycles_ I just installed my lights yesterday. I added 5/8" spacers behind the mount in 4 spots where the screws fit and i had to take off the weather stripping at the top of the trim piece. Seems to work.
I talked to custom dynamics they said mid May the bracket will release for sale.
Is the Shark Demon worth the upgrade?
I love mine but i'm getting some pitting on each light. I've been talking to CD to see what can be done.
@@philgiordano1 Are you getting pitting on the clear glass the light shines through?
@@user-nv1dk9ex1f I'm getting the pitting on the Poly Carbonate outer lens. CD is saying they haven't seen this before.
@@philgiordano1 I find it hard to believe you are the only one with this issue.
Im guessing you do a lot of highway miles.
@@user-nv1dk9ex1f I've only had them installed for 3 weeks. I took a 3000KM road trip in the States. Washed my bike when i got back and noticed they were not smooth anymore. CD are working with me which i appreciate.