You have the shortest, yet most descriptive video on how to remove that wretched airbag! Thanks brother, much appreciated!!! It helps that you showed the clip in back of the airbag.
@@rickhoffman7656 Yes. Just pick your actual paddle shifters, then wiring, plus the steering wheel back cover with cutouts… www.fcpeuro.com/products/bmw-connecting-line-steering-wheel-32306854769 www.fcpeuro.com/products/bmw-cover-steering-wheel-rear-paddles-32307848268
@@rickhoffman7656 The link I provided is all I needed. I have seen some models need additional modifications/wiring under the glovebox but mine did not. Kie’s has a tutorial on how to check if you need that mod. 👍🏽
ok i like it in all i want a new steering wheel too cuz i just want paddle shifters but how do you know ur car can even run with them if it's not m sport
Hey man thank you. There are a couple things to look for. Some come pre-wired from BMW, it has to do with the pin configuration under the passenger dash (pins 2 and 5) and the steering wheel wiring harness. I’m out of town and will try to get a more definitive answer for you when I get back. 👍
Yes everything will still work. You can always add paddle shifters and code them. I think Kies did a vid on how to verify if your car is equipped with the paddle shifter wiring… it is under the passenger dash.
I used ESYS to program mine since I have the German spec that is single stage going into a US spec car with dual stage airbag. I had an SRS light. If you get a US airbag to US vehicle it will be a different programming process or possibly plug and play. It’s quite complicated. If you aren’t technical or already know a lot about it, I know there are some that will connect remotely and program it for you if necessary.👍🏽
@@visiongarage277 Do you have the instructions for ESYS? I have bimmercode, but I guess it doesn't allow me to get into expert mode for the ACSM coding. I have the codes I need, just curious which instructions you used.
I have a bmw 320d touring 2014, do you know why i can not change Bluetooth music with the scroll on the right side of the wheel? When i scroll it the current song name will come up but i can not go to the next song.
Is this Ian aftermarket system or OEM head unit? Is this the only thing that does not work? Is this happening in Apple carplay? All music apps? USB, Radio, etc? Only time I’ve seen that happen is when the song playing is the only one currently in the playlist or a single selected song. Try and straight press on the scroll wheel and then try to scroll. Reboot your phone. Different lightning cable or disconnect and reconnect wireless…
@@visiongarage277 It is the OEM head unit. When i listen to the radio i can scroll trough the radio stations with the scroll. I do not have apple carplay, i listen trough bluetooth with spotify, i have tried to push the scroll in and scroll at the same time and it does not work. I will try do disconnect and see if that works. thx
Just retrofitted the F80 M3 paddle shifters and loving them! I’m currently editing the video. Check my Instagram account for photos. 👍🏽 instagram.com/vision_garage_/
For the paddle shifters, yes, plug and play. The main thing is the airbag. If you have a German spec or US spec airbag. German spec has a single velocity when deployed, US spec has 2 velocities depending on impact levels detected by the system. You’ll want to match that up for plug and play. If airbag origin is mismatched, you will need to have it coded.
@@visiongarage277 got a USA dual airbag. I believe the m sport steering is manual. But since my old steering bag doesn’t have any shifters. It should work?
I’m not exactly sure. Typically, exact replacement parts do not have to be coded, they are plug and play. If you are replacing paddle shift / steering vibration for the same, I can’t imagine that it would require coding. Usually there is a fuss for foreign parts. I could be wrong though. Sorry I can’t provide a definitive answer on that. Best of luck to you though. 👍
How did it go? I am planning to retrofit msports steering wheel from a 2017 model to my 2014 model with the same acc, vibration and paddle shifter functions. Any help would be appreciated!
@@gavinlin6636 Sorry for the late reply. I installed aftermarket F80 paddle shifters shortly after and was able to code it with BimmerCode. You just mark the paddles 'active' in the 'Front Electronic Module' FEM_01
Hey what’s up man? No, BimmerCode is not just a cached to memory type coding, it is a hard code to your ecu. Therefore, disconnecting your battery has no affect any customizations with BC. Hope that helps...👍🏼
@@visiongarage277 Ok do you know the difference between them all and why it matters? I also have the same exact original steering wheel as you at the moment, do you think it would be the same stage or it could be different?
@@seeker6999These are safety features enforced by each manufacturer / model respectively. Single/dual, denotes the airbag inflation / velocity based on the detected severity of the crash. Single only inflates at one intensity while dual can inflate at two. I’m not sure about triple but it will likely follow the same reasoning.
@@seeker6999Even if it ‘looks’ the same, the connectors will determine if it’s dual or single. You may check your VIN with the dealer to verify airbag type and match it up. 👍🏽
There are so many variables that go into coding your steering wheel with ESYS, or any other feature for that matter. When I was researching this, I literally poured through miles of forums and there were tons of changes over time, and likely have been some since I've coded mine. Depending on your year, model, trim, there are quite a few cheat sheets floating around several BMW forums (bimmerpost.com, bimmerforums.com, etc.) Here is a thread to get you started. f30.bimmerpost.com/forums/showthread.php?t=1020138 Be sure to go through the whole thread and look for updates. And tokenmaster.blogspot.com/ is where I was able to successfully activate my copy of ESYS. There is really a lot of good info out there, just takes some time to research, setup ESYS properly, Lancher PRO, activate, then find your applicable codes, and apply them. Take your time as you don't want to mess up anything by rushing through things. Hope this helps. 👍
Yes cruise control still works. Just about anything your new steering wheel comes with can be coded even if it was not on your previous steering wheel… As long as the features and components are all installed; like you would need sensors for adaptive cruise control etc. Hope that makes sense…
I don’t have any experience with that platform, but I’ve seen plenty drivers upgrade their G series steering wheel. Reach out to a tuner company that sells them or research online. 👍🏽
$450. I have direct links to all my mods in the description. Keep in mind this is a German spec single stage airbag, so as I mentioned in the video, US spec is dual stage. So any German spec steering wheel needs to be coded with Esys. (Or else you’ll get airbag light) BimmerCode, Carly etc, won’t work. Dual stage is $250-$300 more and prices vary depending on if it has paddle shifters, heated, vibro, etc.
There is a little line / marker at bottom center that basically only allows you to put the steering wheel on one way. You’ll feel it when it lines up and then push the steering wheel on.
What's up David? With Android stereos, you can install a program called Eplay, which is essentially Apple Car Play. I received the license and download link for Eplay with the Eonon Car Play USB dongle I purchased from Amazon. Once installed, you simply plug in your iPhone just like any other Apple Car play system. Works like a charm. I have links to the stereo I have and the USB car play dongle in my descriptions. I'll be doing a video soon on how I installed it and demonstration. Apple Car Play is a game changer for car infotainment! Love it!
Did this a few months ago. That base airbag is a PAIN. I just tore apart the steering column plastic and unclipped it from a rear access point. Much easier
Yeah, since I’ve done this install, I’ve seen several different methods from other videos. Whatever the method, it’s definitely worth it getting the new one in there. Looks so good!
My car did not come with blind spot detection / lane change asst or radar sensors, etc. There are steering wheels you can get with vibration for this function but wouldn’t have done any good on my car.
Yes, if I had gotten a heated steering wheel there is a wiring harness that would be plug and play on the back. Since I have an alcantara steering wheel cover I was willing to do without.
@@afhostie Obviously I can’t say for sure because my msport did not come heated. Typically, if your car is already coded for a function and you install a part that has that ability, it will be plug and play.
I don’t know. I doubt it, with it being a completely different platform and seeing BMW made drastic changes to the interior. Doesn’t hurt to check with BMW or a reputable shop though. 👊🏽
You should be able to get away with just buying the multifunction controls. I’ve seen them on eBay for like $50 - $150. A lot cheaper than buying a whole steering wheel. Good luck bro. 👍🏽
@@visiongarage277 mine was the se steering wheel and for $750 i got an msport heated steering wheel and retro fitted heated steering wheel. Thanks for the tip hopefully this accident wont happen again 😂😂
@@visiongarage277 yep coffee can definitely be expensive 🤣🤣. thanks Also the msport steering wheels leather feels way better and looks amazing the steering wheel i got was of a wreaked 9000 mile car so it felt like new
@@Tom-q6h2c I agree, a lot better feel to the leather and the button quality as well. I recently added the alcantara wrap to mine. Icing on the cake! 👌
You have the shortest, yet most descriptive video on how to remove that wretched airbag!
Thanks brother, much appreciated!!!
It helps that you showed the clip in back of the airbag.
Dave Long ... Thanks man. Thought I would put as much detail as possible so others wouldn’t have to endure as much pain as I did. 👍🏽
best F30 airbag removal video (in english) i have come across - thank you!!
I appreciate that brother. Glad you found it helpful.🙏🏽👊🏽
Very good video thank you for the clear explanation!
Thank you!!
Is it plug and play, or do I need extra wiring in order for the paddle shifters to work?🤔
Plug and play if you already have shift paddles. I had to get wiring, install, and code because mine did not come with paddles from the factory.
@@visiongarage277 Thank u for replying, then I need the wiring, because I don't have paddle shifters on mine.
@@rickhoffman7656
Yes. Just pick your actual paddle shifters, then wiring, plus the steering wheel back cover with cutouts… www.fcpeuro.com/products/bmw-connecting-line-steering-wheel-32306854769
www.fcpeuro.com/products/bmw-cover-steering-wheel-rear-paddles-32307848268
@@visiongarage277 is there any extra wiring required to make this work? Thank u
@@rickhoffman7656 The link I provided is all I needed. I have seen some models need additional modifications/wiring under the glovebox but mine did not. Kie’s has a tutorial on how to check if you need that mod. 👍🏽
I actually like the original one 100x more then the new circle one. Sometimes you gotta mix original with modern.
@@kdot6523 Yes. Great to have options. 👍🏽
@@visiongarage277 I just seen another steering wheel it actually lights up at the top
In future put the music a bit higher so we can hear you better
Yeah, had a horrible mic then that didn’t work consistently and trying to learn how best to use it. Thx for the feedback. 🙏🏽
No torque specs.. no explanation of why you used your laptop. Music at deafening volume
Yeah 3 years ago. I would change some things if I could go back. thx for the feedback bro.👍🏽
ok i like it in all i want a new steering wheel too cuz i just want paddle shifters but how do you know ur car can even run with them if it's not m sport
Hey man thank you. There are a couple things to look for. Some come pre-wired from BMW, it has to do with the pin configuration under the passenger dash (pins 2 and 5) and the steering wheel wiring harness. I’m out of town and will try to get a more definitive answer for you when I get back. 👍
If I update to m sport with paddle shifters. Will everything still work? I don’t need the shifters to work, just don’t want any codes
Yes everything will still work. You can always add paddle shifters and code them. I think Kies did a vid on how to verify if your car is equipped with the paddle shifter wiring… it is under the passenger dash.
How do you do the coding side? Do you just run the program? Looking at doing this to my F30.
I used ESYS to program mine since I have the German spec that is single stage going into a US spec car with dual stage airbag. I had an SRS light. If you get a US airbag to US vehicle it will be a different programming process or possibly plug and play. It’s quite complicated. If you aren’t technical or already know a lot about it, I know there are some that will connect remotely and program it for you if necessary.👍🏽
@@visiongarage277 Do you have the instructions for ESYS? I have bimmercode, but I guess it doesn't allow me to get into expert mode for the ACSM coding. I have the codes I need, just curious which instructions you used.
I have a bmw 320d touring 2014, do you know why i can not change Bluetooth music with the scroll on the right side of the wheel? When i scroll it the current song name will come up but i can not go to the next song.
Is this Ian aftermarket system or OEM head unit? Is this the only thing that does not work? Is this happening in Apple carplay? All music apps? USB, Radio, etc? Only time I’ve seen that happen is when the song playing is the only one currently in the playlist or a single selected song. Try and straight press on the scroll wheel and then try to scroll. Reboot your phone. Different lightning cable or disconnect and reconnect wireless…
@@visiongarage277 It is the OEM head unit. When i listen to the radio i can scroll trough the radio stations with the scroll. I do not have apple carplay, i listen trough bluetooth with spotify, i have tried to push the scroll in and scroll at the same time and it does not work. I will try do disconnect and see if that works. thx
Really nice video.. So I'm guessing the paddles won't work
Just retrofitted the F80 M3 paddle shifters and loving them! I’m currently editing the video. Check my Instagram account for photos. 👍🏽
instagram.com/vision_garage_/
Going from f30 base steering wheel (with no paddles) to a m sport steering wheel (without paddles). Think it will be plug and play?
For the paddle shifters, yes, plug and play. The main thing is the airbag. If you have a German spec or US spec airbag. German spec has a single velocity when deployed, US spec has 2 velocities depending on impact levels detected by the system. You’ll want to match that up for plug and play. If airbag origin is mismatched, you will need to have it coded.
@@visiongarage277 got a USA dual airbag. I believe the m sport steering is manual. But since my old steering bag doesn’t have any shifters. It should work?
Good video man
Thanks man. Many more to come!
if the previous steering wheel is equipped with paddle shifters will it be automatically coded? Also what about blind spot steering vibration?
I’m not exactly sure. Typically, exact replacement parts do not have to be coded, they are plug and play. If you are replacing paddle shift / steering vibration for the same, I can’t imagine that it would require coding. Usually there is a fuss for foreign parts. I could be wrong though. Sorry I can’t provide a definitive answer on that. Best of luck to you though. 👍
How did it go? I am planning to retrofit msports steering wheel from a 2017 model to my 2014 model with the same acc, vibration and paddle shifter functions. Any help would be appreciated!
@@gavinlin6636 Sorry for the late reply. I installed aftermarket F80 paddle shifters shortly after and was able to code it with BimmerCode. You just mark the paddles 'active' in the 'Front Electronic Module' FEM_01
BMW😍
Yessirr!
Thanks, great video! If I disconnect the battery will it reset all the codings I did with bimmercode?
Hey what’s up man? No, BimmerCode is not just a cached to memory type coding, it is a hard code to your ecu. Therefore, disconnecting your battery has no affect any customizations with BC. Hope that helps...👍🏼
@@visiongarage277 thanks a lot!
Was your airbag a dual stage or triple?
Original was dual, replaced it with single so I had to code out the srs light by with Esys.
@@visiongarage277 Ok do you know the difference between them all and why it matters? I also have the same exact original steering wheel as you at the moment, do you think it would be the same stage or it could be different?
@@seeker6999These are safety features enforced by each manufacturer / model respectively. Single/dual, denotes the airbag inflation / velocity based on the detected severity of the crash. Single only inflates at one intensity while dual can inflate at two. I’m not sure about triple but it will likely follow the same reasoning.
@@seeker6999Even if it ‘looks’ the same, the connectors will determine if it’s dual or single. You may check your VIN with the dealer to verify airbag type and match it up. 👍🏽
@@visiongarage277 Ok, thank you so much
Please could you help me I had airbag light in on I have Esys but I don’t know codes for the code for single stage
There are so many variables that go into coding your steering wheel with ESYS, or any other feature for that matter. When I was researching this, I literally poured through miles of forums and there were tons of changes over time, and likely have been some since I've coded mine. Depending on your year, model, trim, there are quite a few cheat sheets floating around several BMW forums (bimmerpost.com, bimmerforums.com, etc.) Here is a thread to get you started. f30.bimmerpost.com/forums/showthread.php?t=1020138 Be sure to go through the whole thread and look for updates. And tokenmaster.blogspot.com/ is where I was able to successfully activate my copy of ESYS. There is really a lot of good info out there, just takes some time to research, setup ESYS properly, Lancher PRO, activate, then find your applicable codes, and apply them. Take your time as you don't want to mess up anything by rushing through things. Hope this helps. 👍
Does everything still work like cruise control
Yes cruise control still works. Just about anything your new steering wheel comes with can be coded even if it was not on your previous steering wheel… As long as the features and components are all installed; like you would need sensors for adaptive cruise control etc. Hope that makes sense…
Can this be done on g20 base
I don’t have any experience with that platform, but I’ve seen plenty drivers upgrade their G series steering wheel. Reach out to a tuner company that sells them or research online. 👍🏽
Plz tell the price
$450. I have direct links to all my mods in the description. Keep in mind this is a German spec single stage airbag, so as I mentioned in the video, US spec is dual stage. So any German spec steering wheel needs to be coded with Esys. (Or else you’ll get airbag light) BimmerCode, Carly etc, won’t work. Dual stage is $250-$300 more and prices vary depending on if it has paddle shifters, heated, vibro, etc.
Can you guide me how coding the aur bag
There are some people who can connect and do coding for you, however I don’t. I can send you some links to get started.
How do u know when the steering wheel is straight? Did u go by the feel or does it have some kind of a guidelines?
There is a little line / marker at bottom center that basically only allows you to put the steering wheel on one way. You’ll feel it when it lines up and then push the steering wheel on.
How did you add apple CarPlay to your Idrive?
What's up David? With Android stereos, you can install a program called Eplay, which is essentially Apple Car Play. I received the license and download link for Eplay with the Eonon Car Play USB dongle I purchased from Amazon. Once installed, you simply plug in your iPhone just like any other Apple Car play system. Works like a charm. I have links to the stereo I have and the USB car play dongle in my descriptions. I'll be doing a video soon on how I installed it and demonstration. Apple Car Play is a game changer for car infotainment! Love it!
Video up on Apple CarPlay!
Did this a few months ago. That base airbag is a PAIN. I just tore apart the steering column plastic and unclipped it from a rear access point. Much easier
Yeah, since I’ve done this install, I’ve seen several different methods from other videos. Whatever the method, it’s definitely worth it getting the new one in there. Looks so good!
VISION GARAGE and feels amazing too!
it is nice steering wheel but you miss a lot oh function if you have blind spots ect
My car did not come with blind spot detection / lane change asst or radar sensors, etc. There are steering wheels you can get with vibration for this function but wouldn’t have done any good on my car.
Any idea if the heated steering wheel would be plug and play?
Yes, if I had gotten a heated steering wheel there is a wiring harness that would be plug and play on the back. Since I have an alcantara steering wheel cover I was willing to do without.
@@visiongarage277 would you have needed coding?
@@afhostie Obviously I can’t say for sure because my msport did not come heated. Typically, if your car is already coded for a function and you install a part that has that ability, it will be plug and play.
Where did you get the air bag?
And how much do they usually go for?
Airbag and whole steering wheel assembly from an eBay seller in Germany
@@visiongarage277 ok thank you
@@seang1239 I believe it was $450. Please note mine is German spec, thus the cheaper price. US spec air bags are more expensive and plug and play.
@@visiongarage277 thanks for the response!
it work on g20 ?
I don’t know. I doubt it, with it being a completely different platform and seeing BMW made drastic changes to the interior. Doesn’t hurt to check with BMW or a reputable shop though. 👊🏽
из 2004 в 2016
Not sure what that means. But this is a 2013
Thanks spilt coffee all over the multifunction controls and the buttons stopped working
You should be able to get away with just buying the multifunction controls. I’ve seen them on eBay for like $50 - $150. A lot cheaper than buying a whole steering wheel. Good luck bro. 👍🏽
@@visiongarage277 mine was the se steering wheel and for $750 i got an msport heated steering wheel and retro fitted heated steering wheel. Thanks for the tip hopefully this accident wont happen again 😂😂
@@Tom-q6h2c Nice... Yeah, coffee can be quite expensive at times. 😊 Glad you got it replaced bro. 👍🏽
@@visiongarage277 yep coffee can definitely be expensive 🤣🤣. thanks
Also the msport steering wheels leather feels way better and looks amazing the steering wheel i got was of a wreaked 9000 mile car so it felt like new
@@Tom-q6h2c I agree, a lot better feel to the leather and the button quality as well. I recently added the alcantara wrap to mine. Icing on the cake! 👌
Horrible music