CAN-AM RYKER POWER VISION 3 PV3 WON'T POWER ON FIX
Vložit
- čas přidán 16. 08. 2021
- #ryker #blrtuning #bluedragon
This is just a quick video to show you how to fix the issue with the your pv3 not powering on. once it is plugged into the diagnostics port. if it is not powering on when you power your bike on then shut the vehicle down completely by removing the key. this is the quickest way to get the vehicle to shut down. now go to your fuse block and look at fuse number f3 it's a 5 amp fuse that will say accessory USB. check that fuse. even if it looks like it's not blown it probably is. replace the fuse. you should see extra fuses underneath of the fuse box top compartment. get yourself a pair of needle nose pliers remove the replacement fuse and replace that 5 amp fuse. this should resolve your issue. do not use a bigger fuse this is a terrible idea. don't let anybody tell you any different. using a bigger fuse than what is supposed to be there can cause even more issues down the road should a fuse tried to blow. you could end up melting wires and run into all kinds of problems including electrical fire.
if you want to reach out to me about custom tuning you can get a hold of me through any of the social media links below..
You can reach out to me or follow me through any one of the following links. I am on all social media platforms.
BLR TUNING Facebook PAGE
/ blrtuning
ME ON FACEBOOK
Bill Ramseyer Jr
/ biggdaddy007br
Twitter
@billramseyerjr
/ billramseyerjr
Instagram
@BIGGDADDY007BR
/ biggdaddy007br
snapchat
@BIGGDADDY007BR
CZcams
BILLRAMSEYERJR
m.czcams.com/users/BILLRAMSEYE...
Xbox-1
HONDA250XATV
if you enjoy my CZcams content please consider subscribing to the channel as it helps me out tremendously. thank you for watching.
THE DYNOJET PV3 IS CAPABLE OF DISPLAYING MULTIPLE DIFFERENT GAUGE SCREENS. YOU CAN SHOW FOUR GAUGES AT ONE TIME AND YOU CAN USE THE UP AND DOWN ARROWS TO SCROLL THROUGH PAGES OF DISPLAY GAUGES. GAUGES CANNOT BE SHOWN ON THE STOCK FACTORY OEM TUNE. THE BIKE MUST BE ON AN AFTERMARKET TUNE WHETHER IT'S FROM US OR SOMEONE ELSE. IN ORDER TO DISPLAY AND READ ANY DATA FROM THE BIKE IT MUST BE ON A AFTERMARKET TUNE. YOU WILL NEED TO SET UP THE GAUGES IN THE SETTINGS OF THE PV3 AFTER FLASHING YOUR BIKE. WE DO OFFER CUSTOM TUNING FOR ALL MOTORCYCLES THAT USE THE DYNOJET PV3. - Auta a dopravní prostředky
PLEASE SUBSCRIBE TO THE CHANNEL IF YOU ENJOY THE CONTENT. SUBSCRIBING HELPS OUT TREMENDOUSLY. THANK YOU FOR WATCHING.
MY PRODUCTS ARE AVAILABLE ON MY ETSY PAGE. USE CODE BLUEDRAGON10 AT CHECKOUT TO GET 10% OFF YOUR ORDER.
Check out my ETSY shop here. www.etsy.com/shop/BLRTUNING
this weekend I am going to check to be sure I have those extra fuses, this is a good reminder video!I have never opened that box on my Ryker/2019. I am familiar with fuses from my Scion xb. :-) though, lol
Do you have a video for the instal for the power vision. Great video as always, You rock!
Thanks for the info. does the Ryker have a main fuse? I accidentally switched the battery terminals and now the dash doesn't even turn on.
Not sure
Hello 👋 I'm having an issue with a blown fuse when trying to start bike. Power on sounds when flip switch to on position but no display lights. Fuse only blows when trying to start. I've recently added some new mods but what's weird is everything is plug and play. I turned the bike on a few times to test connections to make sure everything was working correctly all was fine. Tried one last time before putting it all back together then NOTHING!.😳 Please help can't figure out what the issue is bike is less then a year old. I've even taken everything back apart to see if it would correct the problem still nothing. Thank you. Also I would like to have my bike tuned 😊
If you wouldn't mind messaging me through the blr tuning Facebook page it would be easier to chat there perhaps maybe I can help and we can definitely help with custom tuning as well...
m.facebook.com/BLRTUNING/
I got a problem that statrted yesterday. Was driving alone, and out of no where, it just shot of. I costed to a stop, turn kill swicht of, took the key back out, and i repet the starting proces, it turns over but wont start. Got a message on the screan it says please read saifty seam card befoure operating.. the Battery seams to have good charge and cables are tight. No idea what is going on. ??
Same thing happened to me a week or so ago. Scared the mess out of me!
Check your fuses
Check your fuses
Hi, I have problem my fuse red 10a blowing up all the time when I started my Ryker, do anyone know what is it?
Do you have any aftermarket parts, or LED lighting, or have you changed the horn. I guess we would need more details as to anything that's been done to the bike. It sounds to me like a wire might be getting pinched somewhere or there is some kind of short somewhere
what is the big blue coolant
hose about ?
Classified information as of right now all will be released soon
@@BLRTUNING not nice. Pretty sure I already know though.
Hey bud my 2019 ryker crank but won’t star, you know what’s wrong with it?
There's lots of variables and lots of different things that could be going on. Without having the bike in person I wouldn't have any clue
I know it might sound silly but make sure the key is on the bike. I can't tell you how many times I've seen someone try and start the bike only to find out the key wasn't on there. It won't start without the key attached to the vehicle. I'm sure that's not the case but I have to at least mention that as I've seen it so many times.
I have no power at all in my ryker 900 2020 I jump started and I invert the cables to the bike battery by mistake.... anything I have to check for to get power back on
Check all the fuses but if you've burned everything up in reverse it'll bypass the fuses
@BLRTUNING I'll check the fuse box and everything is good there but I still have no power at all
@@emmanuelramirez909 well that's not good... You may have shorted out the ECU...
@@BLRTUNING how can I find out if the ecu is burned
@emmanuelramirez909 not sure.. without having it in person