Video není dostupné.
Omlouváme se.
Racing Mower Hand/E Brake + AUX Brake & New Battery Mount
Vložit
- čas přidán 19. 08. 2024
- In this video, I separate the clutch from the brakes by using the mower deck lever to turn it into a hand brake! Plus I also rig up the original transaxle brakes as well! And they both work pretty good!
Mower Playlist: • Rat Rod Racing Lawn Mower
Buddies Channel: / @levidoeseverything
Thanks for watching!
The brake method will also work if your mower is original and still lifted by hooking up the rod directly to the brakes! Pretty much the same concept!
I've watched a lot of your videos. I have to say, you impress me kid. I think you will have your own show and be well known before you are 40. Keep up the learning and fabrication
Thanks dude:) means a lot!
@@IngenTechNational I'm glad to see someone younger actually putting in effort and learning. You are welcome
I feel the frustration man, yesterday I was trying to get rid of two bolts rubbing my belt. It took me collectively three hours to get them off. I had to reach under the engine from the top and put vice grips on them. Then crawl under to impact them out. It works good now though
Dang man! I definitely know where you are coming from!
'ok offroad mowers' builds those handles into brakes
I’m building a mower atm and I thought about getting a drum brake kit but I just bought a crappy broken moped for 50$ and robed the hydraulic disk off of it… I plan on going faster than a mower should so ima need the extra stopping power.. and I had the same idea with a hand break a wile back but never did it I was going to do a “drift” style mower lol… keep up the awesome videos 👍
Nice dude! This brake will stop you but won’t lock the tires up 😂
@@IngenTechNational lol I figured the drums will work good but I also wanted an excuse to go full send on the project “but still have a tight budget”
@@IngenTechNational I wanted to go live axle but I looked online and they where all costed a bit more than I wanted…. So my redneck ingenuity kicked in and I used the inner axle shaft from a old truck “Dana 70” , than cut a key way in it with a drill press and a few milling bits.
@@lukeboehmer5790 Yeah!
Okoffroadmowers did the brakes on the deck lift he's got some of the best mowers ive seen on utoob... It works okay but my favorite is gas and brake pedal on the right and clutch on left.. it feels natural but you want as much force on that tiny band brake as possible tho.. I think the spring in that linkage is gonna screw it all up.. why can't u run a straight link from the deck lever to the brake?
Idk, it'll be a lot of cutting and welding. It's pretty fine this way I think and stops pretty ok! I'll check out Okoffroadmowers video!
@@IngenTechNational someone else called strange mowers made a 40 mph mower with that as the break
did you weld the axels in the transmission if not your only using the break on one wheel. i think?
Nah the diff is still open and yes it is only braking that wheel, the brake isn't gonna skid the tire or make it handle funny but it will slow it down. It works fine for this but later on it may be changed but idk yet.
Did you just do a pulley swap to make it go that fast ?
In theory it is a double pulley swap lol. I put a 1:1 ratio from the engine to the jackshaft and a 2.5:1 or so ratio from the jackshaft to the transaxle. So yeah it is extremely pulley swapped lmao!
Is there a way to do the pulley swap without welding?
Unless you get some the bolt right onto the shaft and not weld a hub to a pulley.
Can you make a video of how to bypass the safety switches on the parts mower plzzzzzz
Just find the switch, take it apart, use a volt meter to find 12V when power is on and off, usually just look for the 2 white wires(ignore the black)"4 wires total" and just put a jumper connecting the 2 wires.
@@IngenTechNational appreciate it boss I’ve really enjoyed your videos recently there fun ash to watch keep up the good work big dawg
@@blakesterling4122 Yessum! Thanks dude!
@@IngenTechNational you should also do a video on welding the dif on one of the mowers
@@blakesterling4122 Alright I see about it maybe lol!
So does the clutch petal do anything now?
Yeah, it still releases tension on the belt still making it the clutch lol.
Is it possible to blow a motor I'm new to this lol 😆 I have a snapper rear engine and that thing goes
Yeah lol if you bypass the governor revving it too high, really low or no oil, and no airfilter letting it breath in leaves, dirt, rocks and debris when your driving.
@@IngenTechNational I got some vids onto my channel I got a full size Honda civic muffler on it 😂
I have a band brake setup on my transaxle also, but so far it really sucks, it will grab the tire good when testing it up in the air, but when moving it feels like it does nothing. I basically redid the whole system so it will engage much better, but before I go any further, is it even possible to get them to grab any better than the way you have it?
Idk fully! Unless I somehow mount them on the jackshaft for squeeze some small hydraulic disc in there but that is almost impossible. Also think about it, it is a drum brake designed for a small little go-kart under 30 mph with a simple drivetrain. Not a big huge heavy lawn mower going a lot faster with a more complex drivetrain and trying to slow it down lol.
@@IngenTechNational well I have an update, I figured it out, and I have brakes now. With proper adjustments it’s stops me very well. I had to redo everything, and take out any flex so the band brake can wrap around as hard as it possibly can.
Alright thanks!