awesome! Floor tray is baller. Put the tony kart pedals in, colour will match the tie rods and should not look out of place also will contrasr with the floor tray better. CNC an aluminum block up to retro fit the tony kart foot rests on as well. bellissimo 👌🤜
@@PowerRepublic sounds like a good deal to me so that will be 1 round each before we get to QLD? both in birels this year with a bit of luck they can clean sweep the 5 rounds with a 1-2 series finish (would be great for a tie though)
Use the original pedals :) The camber waa set with stub benders, a prett cruil tool but the only way Unfortunately you might have wabted to do that before the re plating
I could what this type of video all day long ! So satisfying to see a restoration project, although a little pissed with the chromation cost. There should be an alternative cheaper option ...
thanks for watching legend . yeah chroming has gotta expensive cause of environmental issues and also it is in high demand. cheaper to buy new parts if you can
Use original pedals and 30mm axle ... and parts of this kart..is ready for the wall😊!!!goodwork!!yYou can make the original tank with silver tape like new!!
Yo Derek, I have a request! could you make a video about the rotax max cylinders (dyno run) to map the difference between the 2023 and new 2024 cylinders
We need another episode of this build!
yeah I'm a slacker for sure on this years YT vids. apologies again
I'll start to restore my vintage PCR 100cc kart after this inspirational video. Thanks, Power Republic!
cheers legend, get out there and start racing !!!
That floor tray is too nice to use! That thing is wall art
yeah its wicked, but I'm gunna send it anyway !!!!
Still hanging out for Episode 5!
cheers legend for tuning in, been a bit hectic with the race season stuff, next episode will drop in May
Fit cadet pedals on it will be close to what was on before 👌
yeah that is a popular choice
If I had this kart, I would PPF the floor tray for sure !!
yeah its almost too good to use
Glad you went with the proper DAP red! That KR DAP reissue in maroon and mustard yellow looks like something Ron Burgundy would drive 🤣
hahahahahaha Ronnie B is Number 1 in go karts for sure !!!!
Sadly the KR one has no connection with the original with the Parrilla family :(
Beautiful. I would put that on a wall in my house! Lol. Art all the way!
Great idea!! thanks for watching
Cadet chrome ones, they look more period correct. Good to see the old girl coming back together.
thanks for tuning inn legend !!
cadet ones look good!!!! same feel
thanks for that legend !
awesome! Floor tray is baller. Put the tony kart pedals in, colour will match the tie rods and should not look out of place also will contrasr with the floor tray better. CNC an aluminum block up to retro fit the tony kart foot rests on as well. bellissimo 👌🤜
guesty, thanks for tip legend !! good luck at the AKC this year. tell the boys if they win AKC I will let have a spin when the resto is complete
@@PowerRepublic sounds like a good deal to me so that will be 1 round each before we get to QLD? both in birels this year with a bit of luck they can clean sweep the 5 rounds with a 1-2 series finish (would be great for a tie though)
Don't track it!!! 😂 Cadet pedals is a better in terms of looks.
yeah I like the chrome pedal too. its definitely going on the track !!!
Use the original pedals :)
The camber waa set with stub benders, a prett cruil tool but the only way
Unfortunately you might have wabted to do that before the re plating
Thanks for the tips!
Cadet pedalssss
yeah they look super cool
Love it! I’d use as many original parts as possible, but that’s just me. Definitely 30mm axle though!
Good choice! 30mm solid axle it is !!!
I could what this type of video all day long ! So satisfying to see a restoration project, although a little pissed with the chromation cost. There should be an alternative cheaper option ...
thanks for watching legend . yeah chroming has gotta expensive cause of environmental issues and also it is in high demand. cheaper to buy new parts if you can
Environmentalist are killing everything…
yep
Any news on the kart and engine videos? Great content
stay tuned.....cause tomorrow morning at 6am (beating Apple new iPhone launch hehehe) is the premiere !!!!!!!!!!!!!!!!!!
New Tony cart. The last one you showed as an option.
sweet as, thanks for watching the vid and voting for the pedals!
Use original pedals and 30mm axle ... and parts of this kart..is ready for the wall😊!!!goodwork!!yYou can make the original tank with silver tape like new!!
nah gotta take her for a spin . I'm dying to hear the 20k rpm !!!
Polish the old pedals Des 👌
yeah they will look good, we will have to see who wins the vote
New tony kart pedals. The gold will complement the floor tray really well
yeah boi !!!
New pedals!
cheers legend
New pedals
cheers legend. new style senior ones like this .......
www.internationalkarting.com.au/shop/item/adjustable-accelerator-pedal-2013
Hey mate. Which kart is this. Do you know if there are any stub axle around. I have one very similar. Cheers Lloyd nz
DAP Greyhound. search in Italy as we don't have any here in Aus
Polish the old man pedals, it will look mint👌
its neck and neck with new senior pedal's v's polish up the old ones !
The cadet pedals match best.
yeah you like the chrome ?
Cadet pedals
cheers legend
Put the new pedals on
Snr gold or junior silver ?
Snr gold
cheers legend
Yo Derek, I have a request! could you make a video about the rotax max cylinders (dyno run) to map the difference between the 2023 and new 2024 cylinders
hey Jody, sure can, as soon as then send me one
Do you tighten the Floor? or leave it to move a bit?
on this one we used rubber washers for a little bit of give.
Thx !! @@PowerRepublic
where is the next part
Yo Des it’s me
Hey Leeroy, do you like the retro kart build ?
Yeah
Old pedals!
O.G