HOW TO INSTALL DUAL MISHIMOTO CATCH CANS ON A 2013 GENESIS COUPE 2.0T (EVERYTHING YOU NEED)
Vložit
- čas přidán 3. 10. 2021
- Hope everyone enjoyed today's video!
Everything you will need:
* 90 degree brackets
* 8/30 second screw lock nuts (4)
* Teflon tape
* 1/2 inch pipe (4 feet)
* Hose clamp (8)
Merch⬇️⬇️
draxdietz.com/
My Instagram
draxdietz?...
My TikTok
www.tiktok.com/@draxdietz?lan... - Auta a dopravní prostředky
What catch cans are these? I don’t see them in the bio, thanks man. Good vid
Mishimoto
Where’d u get the hoses? My local autozone and other stores didn’t have. Fuel hoses right? And could u tell me the sizes u got?
Yes it's in my bio buy DM me on insta I'll send you the link to them
DM me on insta I'll send you the link.
You can go to O'Reillys and ask them if they have hoses in the back. They usually have different sizes/thickness
@@projectocamero7502 yeah I ended up going to NAPA. They were the only ones carrying actual PCV hoses. Didn’t wanna use heater hoses(they are not pressure rated)
Where u get the bracket?
Seeing drax, pj Morrison, and genesis coupe hub makes me want to keep my car i have a 2013 gen coupe 2.0t 😞 I should of waited to find a 3.8 I feel ashamed
You should get one!
@@DraxDietz drax dude I still have my 2.0t 2013 I got pulled over last month for excessive muffler noise and he tried to write me a ticket for my intake as well and told me to see a smog referee put he said it was all good 😞 I’m the third owner the previous owner messed up the headlights by sanding it and the taillights were messed up and it was burned and fading so all I did is replace my headlights and taillights awww man I wish you could see it drax dude
1/2 inch pipe is too big for one side of the pcv what size did you use for it
One of them is 3/8in
Are you located in the bay by any chance??
No I'm in fl
You know I’m stuck I have a find a CZcams or that actually go in detail where the In go and where the out wire goes
Because it's self explanatory
do you need two catch cans for the genesis?
Yes
I prefer 2 but I don't think you NEED 2
@@DraxDietz if you have one, Intake or exhaust would be better? 2 does look nice tho
If you’re in south Florida, I’d pay you to help me😂
Where ya at
@@DraxDietz Fort Lauderdale
Just bought a 2013 same one I’m so scared the car want be ok bought it through CarMax haven’t saw it yet but it has 60 thousand miles on it n the market is over priced bad right now but I always wants this car after three tiburons r the transmissions hood in them??? R they expensive to fix n gas can u only is 93??
It depends what you set the tune for
DO YOU NEED TWO? OR WOULD ONE WORK FINE? LET ME KNOW BRO THANKS!!!!!
One would work fine!
You need 2. If u only have 1 it needs to be on the intake side not like how he did it
Why did you put two catch cans?
There's 2 exit sides of ventilation with our cars from the crank case so I put one on each side to catch everything
The 2.0 doesn't need a catch can. Only the 3.8 needs a catch can because its a direct injection engine. Cool tutorial tho
the 2.0 needs 2 cans actually lmao, idk what you're on about.