How To ASSEMBLE The Vulp!!! 👨🔬🧠💪
Vložit
- čas přidán 31. 08. 2022
- Finally!! A full length tutorial on how to assemble your new balisong! I hope this helps some of you who have bought it!
💉Pivot Needle: www.balistuff.us/
🤠John's Instagram: / indiana_john_flips
🙏SUPPORT ME ON PATREON: / thewillhirsch
😲BALISONG CASES: cases.willhirsch.gay
🦊THE VULP: amzn.to/3QuvBYs
🎧My Public Discord: / discord
🦑Squid Industries Affiliate: squid.willhirsch.gay
👌SvixCo Affiliate: www.thesvix.com/?ref=WILLHIRSCH
Products featured in this video:
👚MY MERCH: willhirsch.gay
INSTAGRAM
📷 / thewillhirsch 📷
📷 / thebrandonbaker 📷
📈THE BALISONG LIST📈
balisonglist.willhirsch.gay
💸BUY BALISONGS ONLINE💸
/ balisongsale
🦊🦊🦊The Vulp🦊🦊🦊
🦅USA Amazon: amzn.to/3QuvBYs
🍁Canada Vulp: amzn.to/3QKU0sX
🎩UK Amazon: amzn.to/3wkTEBc
🥨Germany Amazon: amzn.to/3PuXiiF
🥐France Amazon: amzn.to/3c73Lmk
🍝Italy Amazon: amzn.to/3pANSHS
🌎Aliexpress, No bottle opener, Worldwide:
www.aliexpress.com/item/32568...
⭐Recommended Products⭐
Balisongs:
Best Cheap Bali - amzn.to/3PkGwmY
Squiddy - amzn.to/38R3U8k
Tools and Modding:
My Knife Case - amzn.to/3hdbpLn
Super Lube - amzn.to/3nUBLEJ
Needle Bottles for Oil - amzn.to/3yVPZbJ
Wiha Torx Set - amzn.to/3l9xXxT
Stubby Screwdriver - amzn.to/3BRWZrN - Zábava
Here is much better quality hardware you can order to replace your Vulp's original stuff:
👷♂Pivots and screws: usaknifemaker.com/sexbolt-pivot-3-16-d-x-32-l-shank-with-1-6-32-bh-ss-screw.html
🛑WHEN YOU ORDER WASHERS, GET THE ONES THAT ARE: "Washer Phosphor Bronze .020"Th x .189"ID x .375"OD - 1 pair"
🚽Washers: usaknifemaker.com/washer-phosphor-bronze-3-16-187-inside-hole-diameter.html
🛑WHEN YOU ORDER WASHERS, GET THE ONES THAT ARE: "Washer Phosphor Bronze .020"Th x .189"ID x .375"OD - 1 pair"
💯T10 Upgrade screws: usaknifemaker.com/screw-6-32-button-head-stainless-steel-1-4-thread-length-25pack.html
🛑THESE SCREWS ONLY FIT THE PIVOTS ABOVE, NOT THE ONES INCLUDED WITH THE VULP. YOU NEED TO GET THE PIVOTS FIRST!!!
Is there nowhere to get black ones?
Hopefully nabalis will sell the hardware on amazon because it's hard to get stuff in europe
Just wanted to say, I ordered the upgraded pivot and screws from the top link when this video went up cuz I was curious, just installed them today and it’s a very nice noticeable upgrade. Just makes everything feel a lot more solid during flipping. Also it works with a T10 wiha driver
@@adamislostit’s better than the v2 hardware?
@@Siman201 no idea, the v2 hardware wasn’t out at that time and I haven’t tried it to compare
The gunk from the washer made a smiley face:) 10:02
i noticed that
Hey will just wanna say I think you're doing a hell of a good job with the vulp launch, I know how stressful this kinda stuff can get but I think you're handling it extraordinarily well. Keep up the great work man!
Super-helpful video like always Will!
Love the transparency about what to expect from the vulp.
I heard people were having trouble with this, thank you for making this!
I just oreder the Vulp on Amazon and will get another one with no opener on Aliexpress. I'm starting this hobby at 63 lolll never too late or to old 😎
Never tuned any knives took this apart and it sat apart for 2 days before I started watching tuning videos and got the VULP back together with less tap and play than when I got it!
i don't even have a vulp but this was so helpful. im totally gonna use a lot of these techniques next time i tune my bali
Oh my god thank you for this im literally struggling with reassembling the vulp rn
insanely helpful! My Vulp is as good as out of the box now.
Everything aside that is a sick keyboard Will. How about making a casual video about that and mechanical keyboard sometime?
For everyone that bought the Vulp before the change would nabalis consider selling the hardened screws separate or send some to people that bought it
I just got this the part where you mentioned you hope they do :p
After being in personal touch with Nabalis they claim the following:
The upgraded (new) extra hardware package will be sold separate
A small manufacturer error happened with a few Hardware Packages that were sent with the original Vulp. The error was that the Hardware Packages had broken pivot threads and more, the people who got these can get a free new hardware package with the hardened screws for free if those people contact them. I was one of them, and was told I will get a new one.
Listening to will for 45 mins is so satisfying
wow beautiful keyboard build!
Hi will. I got into a fight at school today and i watch your videos and i always get happy
i adore your keyboard
Great tutorial! Will the next run of Vulps have loctite applied in the factory?
You should do one with the Glidr arctic
Thanks I got stuck here for hours
Those key caps 🤌🤩
For the washers, rounded side should face bushing and flat side should face the handles, to my understanding
Nice babyyyyyy
I applied the thread locker that came with my nabalis Morse the day after I got it and it had no tap at first but now (a week or so after) it has a little bit of tap but I am sure that the screws did not move, I was wondering if it could be the bushings that compressed or if I tuned it completely wrong lol ( I tightened it a little bit more than the point where the screw doesn't move easily at all). Anyways, was hoping you could give a rational explanation to this mystery of life 😂, love the videos keep it up❤️💪
Did u wait a day for the loctite to dry
Hey will. Any news on additional hardware? Or what size screws are they so I can get them for myself??
Very cool very swag
When the production goes out on the green teal are you ever going to bring it back?
A question that I had, that could be a video idea, is how to practice flipping (for how long, how often, is it a good thing to repeatedly do the same tricks or is it better to mix and match everything and practice that way) I watched your how to get flow and how to get better at flipping videos, but I often find myself messing up tricks the more I practice them. Thanks 👍
I would just keep practicing whatever u want or feel like doing. Any time that you put into the hobby, even just messing around is bound to help you improve. Being able to smoothly transition between tricks and have good flow just come from messing up over and over and over again.
@@birbsbalis2053 ok thanks 👍
You don't have to be locked on to one single way to practice flipping, as everything you've just said is a way to get better. Just mess around and you'll get good, tho I wouldn't suggest spending your time on short tricks, specifically those you see on BigFlip's channel as you won't be using most of them anyways unless you can incorporate them in a way you like if you aren't going to follow the what I'd call "conventional flipping" aka something you see alot online My way of getting better is to dedicate myself to learning combos immediately after I've learned the basis (fans, rollovers, twirls). It will be hard at first, but it will allows you to understand what combos basically are, the flow you're going to need to string combos together, and will let you know the tricks commonly used in combos. The last thing I said is important cus that draws a clear path for you to follow, aka you know what trick you're going to learn next. After that, I would recommend learning from other people to develop your own style and to further improve. My style of flipping is heavily inspired by Banzo Complains, shrimp_flips and Will's tho Will's flipping do feels kinda basic but I've learned from him anyways. As for how long, fuck that, learn for as long as you want, who cares, as long as you get consistent, that's good enough. R
the washer made a smiley face here lol 10:01
im gonna instantly buy the vulp once its back in stock, i just have a quick question where does the stock come in first if that makes any sense..? or well... where can i buy it first
mine just came in the mail, as I was watching this
I would be interested at what point in the process I should apply threadlocker/teflontape?
I got the red and black version, where can I find the pivots and screws for that model?
Should I be needing to replace screws as of august 2023? I can’t tell on Amazon if that has been changed.
Great job with the vulp! It’s amazing to flip. But my only issue is tap. I tried to tighten it, it doesn’t get to the point where it had little to no tap. It just ended up having tap on only one side. Bit handle has the tap, safe has barely any. Curious if its just me?
Not just you. Unfortunately the vulp isn’t even made as well as the morse. I’ve taken my morse apart 50 times, replaced hardware but never had to tune the bushings. Zero tap zero play. But the vulp I cannot tune at all and when I take it apart I cannot get it back together. The tolerances aren’t even good enough for it to be this difficult honestly.
nice keyboard do it do the big thoccs
Hey Will I just got my vulp and I was trying to take out the screws but the pivots were just spinning. I squeezed thé balisong handles as tight as I could while trying to unscrew it but the pivots just spun
Do you do this when you get it or when you use it a lot
i got the bushings mixed up is there a way to tell which is which or will i just have to assemble it and reassemble it if i get it wrong
Do you know if the vulp will be available in India?
what is the best lupe for the vulp?
Bro was tinking for a 1 minuta
hey, just wanted to come on here and say that I recently took apart my vulp to replace the hardware and im having a whole lot of trouble getting the handles to open up in order to put the washers in, can I have any advice? i tried the solution he used in the video but unfortunately it did not work, even after 20+ tries
Damn I wish I knew this yesterday cuz I just stripped my screws lol😬
do you know if any of the squid industry's hardware is compatible with the vulp?
My vulp came with a small chip but still flips good and it did not come with locktite
Im getting motion sickness from how much you move your head
My vulp still has no tap because I don’t drop it and I’ve had it for a week and a half
sorry it's completely out of context, what are those keycaps you got on your keyboard? the orange ones
In order to *assemble* your Vulp, you must first *dissemble* tour Vulp
Will i want to get an orange vulp because it fits the vulp fox theme, it sold out in like 10 seconds man on blade HQ please let me have one, i can buy one or trade for a black vulp hehe
What diameter are the washers? Are they 0.5 or 0.6
I didnt get the t8 bit in my box 😕
so sad i missed the drop on Blade HQ??🦊😿
I really enjoy my Vulp. Mine has developed pretty bad blade rub and tap, however. Disassembly, part swap, etc, have only made it worse. We'll see what happens. So far it's just annoying and causing some of the finish to rub off the blade.
Do you have lube for it?
@@WillHirschFlips Yeah, I've tried generic as well as things like blue lube on it. The only way to mitigate it it to overtighten, which as you mentioned, grooves the washers. I ordered some of the better washers that you posted, and that may resolve the issue. Blade rub on folders is usually a washer issue anyway.
Medusa review?????
👍
Hi bro
See, the “special trick” that he does is really smart BUT, I would not be afraid of breaking the handle, but instead weakening the handle up where the pivots and the zens are bc I feel like if you keep bending something just like any material, it will get it weaker and closer to breaking. Yes the amount your bending it is so small it shouldn’t matter but for how long I feel like these are going to last, at some point that’s just how I feel it would do
How’s progress on the blue vulp coming along?
It's in production!
@@WillHirschFlips that’s great too hear! :D
@@WillHirschFlips any plans for dark blue
I’ve been wanting to get one of those pivot needles but every time I check the site they’re sold out. 😢
They are in stock now!! Not sure how many are left but it’s been a couple hours.
@@jaysaintt6466 Managed to snag one. Thank you. :)
@@Osborne4Life got you my friend 👍🏽
hi
Lmao I use metal chopsticks as a pivot needle
This is a great idea
that's a keychron q5 right?
Yes! I love it
@@WillHirschFlips nice! heard keychron makes great stuff
The gap in the handle is too narrow to insert the blade. I tried to force it in and the paint was scraped off.
I'll keep playing with Amazon balisong
thank you
I recommend you just red loctight anything by nabalis
Second!!!
Will wd40 work?
i think i've already broken it...
20th
I'm a Little tool
Still waiting for them to start selling super lube
At what point does he show you how to assemble? Just confused as to why it’s a 40min video when it could’ve been 10-20min ffs