great vid mate: LIKE. Still, i made all these config. you're doing, still graylog does not come up with anything from the WIndows server. Still trying to understand where is the issue. Telnet is working between WIN Server and Graylog on ports 9200,9000.
did exactly like you demonstrated for windows 10 but not receiving any log. I used GELF UDP with port 5150 in the input and also in the nxlog configuration
i think you'd need to configure windows events on the windows machine, or do it with pipelines in Graylog and tell which messages should go into graylog
I did all the configuration as shown in the video, I started the nxlog service correctly, but it is not sending messages to the graylog. Would you help me?
would you like to see a sidecar tutorial? this tutorial with nxlog should fit all windows systems( for the windows 2003 servers and below you need to use as an input with mseventlog module) and linux(for the config part)
@@BitsByteHard yes, without Sidecar you can't follow this tutorial. Graylog's documentation is a mess, complete and thorough but you are constantly jumping around to do the most simple things, gets tiresome really fast. Thanks for taking your time doing this series.
@@sopota6469 well let me tell you something, for the environment i work in like production one, all of the linux and windows servers have nxlog installed on them, and i'm receiving logs from them to graylog without a single issue everything works like a charm. but just for fun i'll also do a sidecar tutorial for graylog ;)
i haven't tested nxlog with windows 10, maybe there is an issue with nxlog. maybe you can try to use sidecar for windows 10, i have a tutorial about it on the channel, try it and hopefully for you it will work.
So simple, so easy. Thank you.
You’re welcome 😊
That helped! Thank you :) I was struggling trying to forward Windows logs to my Graylog server.
You're welcome!
Thank you very much for weeks was looking for a solution . I just found it thank you very much
Hi, thanks for your guide, it was very helpful for me! Like!
yw
how to filter logs for sending to graylog, eg. only to send some windows logs to graylog, and other logs to disregard.
Thanks. very helpful guide.
Glad it was helpful!
when i tied saving in notepad it says i don't have permission to open the file. What can i do to get around that?
Hi does it need to be different port on each different input? (like I want to add another input)
Thank you boss!
Welcome!
thanks for you video!
Welcome!
great vid mate: LIKE.
Still, i made all these config. you're doing, still graylog does not come up with anything from the WIndows server.
Still trying to understand where is the issue.
Telnet is working between WIN Server and Graylog on ports 9200,9000.
What are you using for a lb for UDP? I typically use HAproxy but to my knowledge its only tcp
FOR trese video i was using free Kemp load balancer
did exactly like you demonstrated for windows 10 but not receiving any log. I used GELF UDP with port 5150 in the input and also in the nxlog configuration
Recheck your configuration , tshoot the network and so on. You could also use the official documentation for nxlog, there might be some changes
Muito bem explicado, thanks
glad you liked it
Hi, do you know how I can filter the event logs, so that for example only the System tab errors are showed?
i think you'd need to configure windows events on the windows machine, or do it with pipelines in Graylog and tell which messages should go into graylog
@@BitsByteHard do you have a example? Or can you help me?
I did all the configuration as shown in the video, I started the nxlog service correctly, but it is not sending messages to the graylog.
Would you help me?
check if the time on both machines is synced and it's the same minute hour second timezone
@@BitsByteHardok it was solved! I would like another help. I'm not able to filter the logs that Nxlog sends to graylog. could you help me
Why you don't use Sidecar ?
This tutorial fit Windows 10 ?
Thanks.
would you like to see a sidecar tutorial?
this tutorial with nxlog should fit all windows systems( for the windows 2003 servers and below you need to use as an input with mseventlog module) and linux(for the config part)
@@BitsByteHard yes, without Sidecar you can't follow this tutorial. Graylog's documentation is a mess, complete and thorough but you are constantly jumping around to do the most simple things, gets tiresome really fast. Thanks for taking your time doing this series.
@@sopota6469 well let me tell you something, for the environment i work in like production one, all of the linux and windows servers have nxlog installed on them, and i'm receiving logs from them to graylog without a single issue everything works like a charm.
but just for fun i'll also do a sidecar tutorial for graylog ;)
hi Dereck here are the sidecar tutorials for windows and linux
czcams.com/video/oJ08QadvM88/video.html
czcams.com/video/gjXXs0_fBzU/video.html
While opening nx its showing some fatal qt error can u please guide y its happen n how to resolve it....please i am stuck here
contact me on twitter and we can speak there
hi
does'nt work with windows 10
thanks
i haven't tested nxlog with windows 10, maybe there is an issue with nxlog.
maybe you can try to use sidecar for windows 10, i have a tutorial about it on the channel, try it and hopefully for you it will work.
@@BitsByteHard It works perfectly well with Windows 10 using these instructions
@@erkoj07 glad to hear that, thanks for the confirmation.
UDP!!!
:D