Thank you for all of the great info! Now I know how to open and take the cover off! Wasn’t sure on the next level opening, same as the first fold over.
I have this cover on my '21 TRD Sport, why I am here is I have trouble with snow getting into the inlet holes you clip the cover into/ice accumulation in those holes. I was hoping to find a part number or something for the actual clips so I could get a second set to leave in there or a cover to prevent stuff from getting in there while the cover is down.
@@stevenwelchtoyota none with similar clips, thank you for response, my wifes brother 3D printed some rubber type plugs I can now just put in like a cork
Thanks for the video. Do you happen to know if this 3rd gen cover would fit and mount the same way on a 2nd gen Tacoma? I can't find any info about anyone trying this and found a nice one for sale locally.
Does anyone know if this tonneau cover is still available from Toyota? Also, could someone please post a part number for this cover featured in this video?
@@stevenwelchtoyota is there a part number for these? I called my dealership after buying a 2017 Tacoma LIMITED and they told me they just sell the backflip brand and there is not a Toyota brand which does not seem to be true based on your video and others. Thanks for your help and video
@stevenwelchtoyota thanks I appreciate you taking the time to respond I meant the holes where the belts lock in find some kind of cover or put tape on so nothing gets in there Thank you
It depends. If it is a factory cover you will notice that there are differences to the bed rails. Chances are the person would not give you those so you would need them. If it is after market then I have no way to answer that other than the size should fit as long as the bed length is the same.
Excellent video.. Much easier to understand than a couple other ones I looked at.
Glad you liked it
Good job describing this. Short, quick and easy to follow.
Glad it was helpful!
Thank you very much. Excellent demonstration.
You are welcome
Thank you for all of the great info! Now I know how to open and take the cover off! Wasn’t sure on the next level opening, same as the first fold over.
exactly
can you get this at the parts counter?
Thank you. I wasn't sure if the bolt was underneath or not.
Happy to help
Thanks for the demo, My second flap won’t release, not sure if it’s a spring issue, any advice
Does the release have resistance?
I have this cover on my '21 TRD Sport, why I am here is I have trouble with snow getting into the inlet holes you clip the cover into/ice accumulation in those holes. I was hoping to find a part number or something for the actual clips so I could get a second set to leave in there or a cover to prevent stuff from getting in there while the cover is down.
they are the same as something like a backpack. do you have an old backpack?
@@stevenwelchtoyota none with similar clips, thank you for response, my wifes brother 3D printed some rubber type plugs I can now just put in like a cork
@@perfectpazzie5340 that is a good idea.
Thanks for the video. Do you happen to know if this 3rd gen cover would fit and mount the same way on a 2nd gen Tacoma? I can't find any info about anyone trying this and found a nice one for sale locally.
They have not released a cover yet
Can a bit of water getting through the back near rhe tailgate?
yes
Does anyone know if this tonneau cover is still available from Toyota? Also, could someone please post a part number for this cover featured in this video?
you can only get it as original equipment on a new Toyota. they dont offer them other than that as oem
Yes this tonneau cover is still available. I make these 😊
@@Katelyn041 pictures?
Where can I get those pins to install? Can I do this myself or take to dealer?
Toyota does not offer this cover aftermarket
does it same bed cover am i gonna get for my 2020 sr5 coming? they said it is Toyota made.
if it is from the factory it is this one
@@stevenwelchtoyota is there a part number for these? I called my dealership after buying a 2017 Tacoma LIMITED and they told me they just sell the backflip brand and there is not a Toyota brand which does not seem to be true based on your video and others. Thanks for your help and video
@@cooperballance206 toyota does not offer the toyota factory one as a aftermarket option
@@stevenwelchtoyota I guess that is why I can’t find it. Ha ha, thank you for the reply and info
@@cooperballance206 no problem
If a person removed the bolt without opening it up can they remove cover and steal what's inside?
it would only release 1 of 4 latch points so i dont think so
@@stevenwelchtoyota thanks
GREAT JOB !!!!
QUICK AND TO THE POINT !!!!
BANG\\🔧🛻
Thank you
Is there anything to cover where those belts go into.I have the oem toyota cover
up front?
@@stevenwelchtoyota yes where the 2 belts go in because water and snow will get in there
@stevenwelchtoyota yes right when the belts go into
I have the oem toyota trifold on 2023 tacoma limited
@@nickk3085 you could use buckles off of a backpack
@stevenwelchtoyota thanks I appreciate you taking the time to respond
I meant the holes where the belts lock in find some kind of cover or put tape on so nothing gets in there
Thank you
Is this better than the bakflip mx4?
Its factory so I consider it better
@@stevenwelchtoyota okay. Purchasing a 2022 tacoma trd pro, does the super white have the issue with paint peel?
is it a soft cover or is it hard? like is it cloth or like plastic. thank you.
hard plastic
I have the same cover need the pins to lock the cover any idea where i can get them
it would have been installed at the factory
I got the cover from someone cover have everything on missing the hardware that bolts to the box
@@user-cn8eq9nh9j they needed to give you the rails from the truck
Thanks for your help well appreciated
@@user-cn8eq9nh9j no problem
Those pieces are built into those rails. You may be able to order the rails separately
My retention bolt is tighter than a nun, having a hard time getting it out
Wd40
Anyone know the part number for this ?
toyota does not offer this one aftermarket
I assembly these covers. Everyday.
Awesome
Where did you buy it?
the factory cover is only available if the truck is originally equipped with it
Steven Welch So can a dealer install this cover?
@@gghostrrider ones like it yes. But the original equipment is only available from the factory
How much
There is water in the bed...does it leak?
I just bought a 2020 and someone offered me their tonneau cover for an older Tacoma. Will it work? And what do I need to change?
It depends. If it is a factory cover you will notice that there are differences to the bed rails. Chances are the person would not give you those so you would need them. If it is after market then I have no way to answer that other than the size should fit as long as the bed length is the same.
No. It had been raining and open
@@stevenwelchtoyota Can I order one you guys?
@@LPFE42 there are several different options available in a tonnau cover
Too bad they don’t sell this anymore… I want one!
They sell it but only factory installed on new
I’m selling mine
@@ceeIoc i ended up a bakflip mx4
I just got it on my 2023 Tacoma I picked up yesterday
I make them and assemble them everyday.
Thanks 😂
Happy to help