Hydro-turf custom boat install and template making tips and tricks
Vložit
- čas přidán 12. 06. 2024
- This is the molded diamond Hydro Turf with the 3m self adhesive.
Hydro Turf custom install on a 14 foot, 200hp mini jet boat I built. I didn't find any how to videos that fit what I was doing so I decided to make one myself. - Auta a dopravní prostředky
Nice work I did my river boat awesome stuff sharp Olfa knife keep it square to line your cutting old carpet layer trick nice finish
Sick boat and turf job
Bad Ass boat. Perfect set-up multi-fun-fish-friends. Got me thinking on my new project.
Great video - very helpful!
Thanks!
great vid! Very descriptive and very well put together! def a follow here
Thanks!
Nice boat
Kris... great video! I realize it is several years old now, but still one of the best on foam decking install. What did you use to round your corners? Was it freehand or did you use something to get them consistent? Thank you!
Looks like a factory job!
Thank you!
How can I join the mini club?! I live in A-town and just purchased a Hewescraft 18’ River Runner w/Rotax Supercharged 250. Great videos and a AMAZING boat, good job! I want one!! How much?!?!
Thanks man! Check out the Facebook group, Alaska Mini Boats. Join the club lol. That sounds like a pretty sweet boat! Well it took me forever to build this boat so not for sale. Maybe someday Ill build another.
Hi there brother, great work! I have an aluminium diamond plated deck and I am a bit uncertain about the hydro turf adhering to it completely. have you ever stuck it to checker plate? should I base coat it with marine adhesive ? cheers
If you had a grinder with a flap wheel or 36grit sanding pad you could buzz the diamonds right off pretty quickly. I don't know how it would stick right over them. The adhesive back is super sticky though. Maybe try a section and see what it looks like before you do the whole thing. If water gets under there is will pull after a while. Good luck!
@@KrisDeVo I fish in salt water and that's what I am worried about, water going under and corrode it.
@@bruciorediculo Might want to grind the diamonds down and/or throw some bottom paint on it to keep from the salt.
I think I missed the answer on the film, but
What material did you use for the template? Where do you get those strips?
This is template material from a local finish carpentry supply. I think you can find it online. Poster board or cardboard work too. Just cut with straight edge.
How about a design overview and some pictures of the engine bay and plumbing
Full build on Alaska Mini Boats page on facebook
Awesome boat. What are you running for lights on it?
Thanks! Running 2 sets of the Rigid Industries D Series Pro floods up front and SR-M Flush Mount Diffused on the rear of the swimdeck. Haven't used them yet because we have 20 hours of sunlight most of the summer. Fall is almost here thought so we will see how they work on the water.
Kris DeVo gonna have to check them out online. Thanks. Boat looks awesome! Get us some videos with it lit up when you get the chance
Thanks will do!
I also am looking for the right boat . forwarding your video's too my Brother. Looks like a nice good all around boat. Great for Hunting.canadian old boy. I have new 20' jet boat but would like a little tougher boat.. How do I get my hands on two.?
I built this, look at FireFish, MotoJet or Bratt
Great Vid. How did the Hydro Turf hold up?? It's been a year, does it last/ work / would you use it again?
Thanks! Its been great and has held up really well. I would definitely use it again.
Where can I get a boat like the one you have?
How can I purchase a similar boat like this! Perfect!!
I built this one. Firefish, Brattjet and MotoJet all make a boat like this one. Thanks!
How much to weld up a 12 . And . Power triple 3 center . I’m the center ? . 16 thousand?
Hey kris what kind of flooring is that?
We made the floor out of 1/2 baltic birch plywood. I want to say it was 9 ply or so. Then a 2 part epoxy primer and then a rubberized coating. Its held up good but now starting to show some signs of wear.
Looks good man, come by and help me do some on mine 👍🏼
Where did you get the boat from
Built it
Plans please...
What hull is that?
A buddy and I built one each. Our own design, no plans. Look at fire fish or bratt for a center console mini
@@KrisDeVo good on ya for doing that yourself. I really like the open bow style but will go with the walk through window apposed to the center console.
Power source twin . . ?
200hp turbo Honda
Or