Abandoned 1966 Ford F100 sitting for 18 years! The $50 beater truck! Will it run? "Ran when Parked"
Vložit
- čas přidán 21. 08. 2024
- This 1966 F100 showed up on Facebook Marketplace this summer and I couldn't pass it up being so close to home. So we went to check it out. There's some usable parts on it but it's a total basket case. Even though it runs and drives surprisingly well! Especially having been parked in the trees 18 years ago and left for dead.
Tools we use:
Zep45 Penetrating Oil: amzn.to/3taR64i
Milwaukee 3/8" cordless ratchet: amzn.to/3wsHW6a
Milwaukee 1/2" Impact: amzn.to/3xDpzMb
Milwaukee 3/8" stubby impact: amzn.to/3e61pT9
Tekton 3/8" SAE deep impact socket set: amzn.to/332CZDv
GearWrench spark plug socket set: amzn.to/3uutdG9
Smittybilt XRC12 Winch: amzn.to/3eGG2qx
Filming equipment we use:
GoPro Hero 8: amzn.to/2PHSU7m
Camera tripod: amzn.to/3gOyULd
Camera light: amzn.to/2PB2SHp
Handheld camera mount: amzn.to/2QJBWG3
External Microphone: amzn.to/3vzdENY
Drop a line: mortskerepair@gmail.com
Instagram: / mortske_repair
Need some Mortske apparel?!? Click the link below!
teespring.com/...
Sammich donations gladly accepted on Patreon :
www.patreon.co...
Wanna send us something?
Mortske Repair
PO Box 1
Gwinner, ND 58040
#hamb #inlinesix #f100 #1966F100 #1966Ford #hotrod #willitrun #ranwhenparked #barnfind #patina #oldjunk #mechanic #rusty #rust #fordF100 #223Ford #inline6 #overheadvalve #badgas #nobrakes
FoMoCo colostomy bag, LOL, that made my day!
Well, I mean, if you don't think about it, that's basically what it is!! Thanks for watching!
@@MortskeRepair Definitely one of the best lines on this video. Subscribed! Keep up the great humor!
@@MortskeRepair just found this gem
Also keep safe guys thanks for the covid relaxing video prime time sucks you guys rock and help with the words stress anyway truck or no truck supper is on me let me know when you are coming 👍😷🍻🍻🍻
You guys are a scream.
when my old ford was sitting. grab a trans bottle with a nozzle on it, clamp it onto the fuel pump intake and gently squeeze as you fire it over. It helps lube the fuel pump and stops the diaphragms tearing. an old farmer taught me that trick when my classic Ford refused to pull fuel, also add a little 2 stroke oil to help lube the seals. It's worked for me 9/10 but each to their own
Good info! Thanks for commenting!
One of these days I'll be coming with s trailer to snag a few of your gems. Guys got some great wheels.
Bring a big trailer and a pocket full of cash Phillip! Thanks for watching!
This is the greatest channel on the CZcams!!!! Right Duff dog!!!
Thanks much!
Don’t listen to people. You’re awesome. All the best parts of Vice Grip Garage and Zip Ties and Bias Plies. Think I’ll stay around for a while. More of this please!
Hey Eli, I really appreciate that!! Thanks for watching and for commenting as well!
More content please...luv this stuff get a marine gas tank for furl
Chip Foose would be impressed LMFAO
Gonna send her to SEMA if they ever have it again! Thanks for watching Damian!
That dog comes running at the sound of an engine turning!
Cuz he knows there's a ride coming shortly!!! Thanks for watching!
My pleasure! What breed is she?
@@jonathanrice1070 He's a Brittany Spaniel!
Another great vidya!!! Can’t ever go wrong with a Ford!!
You got that right!
That was awesome guys! Loved your commentaries. You’re funny as hell. And I love your dogs. Thanks for the video man!
Hey thank you so much for the kind words Alfred! Glad we could entertain you!
I had a 64. It was a great truck, it got even better when I put 383 with a 727 in it. Once I put the 440 into it, not only did it have power to spare but it got 27 miles to the gallon. And this was in the eighties. Yes, it was a Ford truck and yes I put the Dodge engines in it.
Nice!!
Hell yeah! Now it's worth $75. Fitty percent return on investment!
Just gotta hold off until the iron prices go up! Thanks for watching!
Man I watch as many of his" WILL IT START" videos. I love doing what he's doing & I would love to spend a weekend & work on a car & drink a few!! Much love from New Orleans. Keep up the awesome content.
Thanks for watching David!
Better that she lives on inside another truck than the dump! A parts truck is just the second life of a truck if you ask me 🤷🏻♂️😂. So happy I found this channel today
You can't save them all. But I try to save what I can! Thanks for watching!
Them ole Fords just keep on going.
Just mint, runs, drives, slows down and does a burnout what more could a man ask for..
Great vidya, can't wait for more!
Sometimes they hand it over easy! Other times, not so much... Thanks for following along!
I’ve been binge watching your older videos. Haven’t come across one yet that disappoints.
Much appreciated Matthew
It’s amazing that you got it running! 👍
Mort, you were very energetic back then! Also, I love the 30 minute run time! 😂
I was
Ahhhh,, the snow is just about gone here, looks like you too. You're making me want to get an old 1966 GMC. LOL,
A good ole backfire outta the carb think might of singed a mans arm carpets, hahahaha love the vid man👍
It's a deep burn!
Fun to go back and see your older videos
Thanks for watching jeanie!
Got a red '66 Custom cab F100 in my shed. It's been there 20+ years. 352-3 on the tree. Should probably get her going again.
Those FE engines have always been a favorite of mine! Thanks for watching Erik!
Confirms a thing or two I though I knew, and learned a bunch more, and laughed loudly many times along the way!
Thanks for watching Richard!
"Those fingers sticking out of the gas tank access port belong to the Elf. I made him jump in there so he could hold onto the fuel line for me. OK in there, Elf?!"
Haha, poor little guy!! He wanted to come with so bad!
Woof, woof! Back at you!
Damn the tires alone on that bad boy is at least 50 bucks and that paint job and body work that is priceless you can't pay someone to get body and paint like that anyway what a score bring that right to Barrett Jackson it will be a high seller that's for sure it's a custom
I've got it in the showroom now!
Good one Mortske... Have a great day.
Same to you
Classy purchase, no point wasting money on fancy pants brakes, and tyres!
13K miles on the clock??? Sonofabuscuit!!!! Nice to see Duffy supervising the whole operation!!!! PMSL!!!!
Oh she's a low mile gem!
This made me a little nostalgic. I learned to drive in a 66 F100 with a 3spd on the column. It had chicken wire and old license plates holding its front end sheet metal together. No expansion foam hood hinge upgrade, though. Maybe we missed out?
Sounds like yours was a bit nicer than this one!
30:10 I like your rare John Deere camping trailer! 😂
yep colostomy bag done it for me too
Nice to see you guys having fun
The tug of war towing thingy looked good the F100 got its ass kicked by im not sure what it was
If you're not having fun you're doing it wrong! Check out the motorhome video I posted for more info on the tug of war champion! It may have had a weight advantage to go along with some extra horsepower and drive wheels as well. Thanks for watching!
@@MortskeRepair Im gonna check that one out thanks
and your very welcome
Thanks for the entertainment 👍
Anytime boss!
I love this channel, this was a fun video to watch, I'm subbed and waiting for more Mortske adventures!
Thank you so much for watching and even more for subscribing!!
Springtime Yellow! very nice find. ORIGINAL RADIO HOLES! even better! it could have a 240 or the 300 six, the 4 speed is going to be the NP435 . i have had a dozen of the 61-66 ford trucks. still have 3 of them one is a 65 4x4 F260 ;-)
They used to have the coolest color names! Thanks for that info. Ahhh I was thinking 223 but it's likely the 240 since it seems to be a base model for the most part. I've got the same NP435 in my Dodge. Pretty clunky but basically bulletproof. I'd love to find a factory 4x4. Thanks for watching!
That tug o war was great
love the 58! looks like a pretty clean truck
Wow I don't know where you are at, but if someone in Colorado had that old ford they would have wanted $5000 not $50 they think everything is made out of gold and jewels here
Yeah it’s like that everywhere. Someone sees a listing for $50k on Barrett Jackson and suddenly every scrap heap is worth $5k. Thanks for watching!
You have a fun job!!!
Love your videos man I wish I could get a truck that cheap 😅
Great deal love the truck
It's probably the nicest $50 rig I've bought all year! Thanks for watching!
$50 fo the perfect work truck? What a score!
Well it's not quite perfect. Needs a radio and a flatbed! Thanks for watching!
I thought it was a rivet gun but then you grabbed it and it was wire strippers that's awesome those are good to have I usually use a lighter melt the rubber coating and pull it off but sometimes the hot plastic likes to stick to the fingers so those are better and you won't have burned finger tips LOL!
A lighter?!? I've seen guys use their teeth but a lighter?!? Impressive. Get a stripper! The hand held kind!
@@MortskeRepair all strippers are hand held...for the right price
I love 1966 Ford F100.
I wish it was all there and in a bit better shape! Thanks for watching!
“We’re doin’ it Harry”!😂
So many great quotes from that movie!! Thanks for watching!
@@MortskeRepair From Dumb and dumber :P at least you did not sing Marking Bird :P
@@Gilerajohannes Those your skis? Both of them? WE LANDED ON THE MOON!
@@MortskeRepair Haha :) no
Just found your channel and subscribed. I have a 62 Uni have decided what I’m going to do with it yet. I enjoy driving when I can though. Saw the ND plates I live in ND as well.
Thanks so much for watching and subscribing John! I've got a 61 Unibody that will make an appearance at some point I hope!
Look's Like a Keeper
G'DAY MORTSKE, would consider that you have had a WIN with the 66 F100, maybe even lucky enough to have scored a Canadian 300 cubic inch engine,which are considered the pick of the Ford inline 6 cylinder engines,as always, Kindest Regards, Dave McLaughlin Queensland Australia
ICON wants this for a cobra swap
Cosby juice priceless
I could watch this type of content all day!!! I’m glad I discovered ya. Your dialect sounds like you may be from Michigan too eh?
Hey thanks for the comment!! Unfortunately I'm South Canadian!! And thanks for watching!
@@MortskeRepair with how bad my government is corrupt, I’d happily deal with that dummy of yours, Trudeau
@@maddoxlogging2303 Haha I try to avoid politics!
@@MortskeRepair Canadian like me ah?
@@lightningboltschannel525"south canadian" maybe!
I say the same thing about Cheverolets I hate them. So, I got asked if you hate them so much why do you have so many. I replied its a repair shop what do you expect. Lol same can be said about fords lol. Great show keep it up my
Man
Yeah, I'm an equal opportunity hater!
Got a Super clean seat fuel tank. Sending unit and all. North Central Texas.
Killer video!!! Awesome!!!
Thanks a bunch!
I am sure you are only days away from 100k as of today at 99.5k subs
Even a year ago your videos are gold. Albeit I enjoy that you now cut in the clips like tap tap taparoo 🤣
Nice ole ride!
TY!
Thanks for watching!
Well, she runs! Congratulations.
Not every often my $50 junk purchases actually come to life! Thanks for watching!
@@MortskeRepair No problem.
Just feedin her the onions right off the hop.. fuckin mint!
It's the year I was born how did you know it fits me perfectly so thoughtful of you wrap her up send it to st john's
newfoundland canada I'll give best fish and chips dressing an gray you ever had lol literally it swims it self through the batter into the deep fryer lol so deal or no deal? Lol either way thanks for the videos lots of love from eastern canada
Sounds like a helluva deal Doug!
@@pookysdad4884 slimey as usual lll
@@pookysdad4884 lol
Like the dogs
They're such good boys! And girl! Thanks for watching!
Where really doin it Harry!! 😂😂😂
Just when you thought we couldn't get any dumber!! We totally redeem ourselves!!
Okay I’m going back to vice grip garage now. Solid effort though
Hey, thanks for stopping by!
@@MortskeRepair your good! just stop screaming and just do YOUR thing. I´ll be back
Yeah this one was a little excessive I'll agree. But gosh dang I was excited about this purchase!! Thank you for the feeback. Much appreciated!
Woot woot vice grip garage
Sorry man i had to
haaa, dont hold that! that gets yuh 😆😆😆. tech tip of the day, dont get ahold of coil output 🍻
Shock therapy I call it!
Hey Mortske..... Get the headlights working on her and even if it only has 20K on the clock, it'll make a good utility rig!!!!!!
ford stands for fix or repair daily 👍👍
Hey mate, new sub. Liking so far. May I just say the fish eye lense style is weird to watch. Everything is bowed. Or is it me lol
Yeah the camera angle got changed somehow and of course we didn't notice it until editing. We've since fixed it! I appreciate the feedback however! Thanks for watching!
OJ's slow speed chase must have had one of those 6 cylinder Motors in it
Those ford 6’s are tough to beat had one overheat cause of the water pump locked up tight come back in 4 hours changed pump fired right up it was the 300 but not a ford guy myself but some are decent
16:35 BETSEY IS ALIVEEEEEEE!!!!!! 💪
It is scary movie season!!! Thanks for watching!
A 300 6 are the toughest motor ever
I'm not even sure what size this one is. 223 I believe, but essentially the same bones as the 300. Which yes, is a torque monster that withstand about anything!
The 250 with the 2v heads went hard
@@StarlightWorkshop0z I'll have to keep an eye out for one of those. Thanks for the info!
@@MortskeRepair we got them here in Australia. Hopefully they are elsewhere.
@@StarlightWorkshop0z You guys get all the good stuff! Like RWD manual transmission V8 driven Holden utes!
Nice 👍
Thanks ✌
now that was fun thinks
Thanks for watching!
Were you into the Hoover schneef just prior to filming this video? Jacked up! 🥴
there is a 65 ford with good body matching box tool box on side got parked because it needed a tune up i think i can get it for 300 best part it is rust free only reason i am thinking on getting it plus the body is nice on it. u should get good money out of this love deals like this u just can't beat them
“Chip Foose would be impressed“ ha ha ha
You know it!
I'm only 67 so I guess I can use 30W oil.
Duff can really run.
"Where's that dog at?" Probably rolling in poop, if I've learned anything from watching Mortske. lol
Exactly!
Now thats how you treat a Ford!
Haha it loved every minute of it!
I'm from Holland Michigan
I would drive that baby all the way from my front yard to my backyard! 😂 Which is, ahem, further than 3 of my 5 trucks can currently drive 🙄.
Got any videos of that galaxie sitting in the garage?
Just the one where I installed new carpet. Thanks for watching!
That 300 six engine is one of the worlds toughest engines, I've seen several run 500,000 miles and more
Idle jets plugged brakes leaking some where running good other wise
That shack on the manure spreader , is that your hunting shack ? Lol. That engine would fit the COE better but not as much fun ! Lol
That's my vacation home!!
@@MortskeRepair cool and after you take a dump you pull it around the field to empty it ? Lmao. I seen the legs on the building and it looks nice and comfortable !
@@davekimbler2308 No but that's a brilliant idea!
Sounds like I’m watching vice grip garage.
Derek has a great channel as well. Thanks for watching!
Well I'll....be....dipped
@@chrisoreeves Bring the thunder!!!
@@THRASHMETALFUNRIFFS You're pretty sick Chubbs!!
@@THRASHMETALFUNRIFFS Haha, I figured as much! Betty is a nice woman!
I think duff was a little upset when you took off in the truck without him even though you just went around the lot
Yeah he loves rides!
I just subscribed to your channel
Well hey! Thank you very much!! And thanks for watching as well!
Just have to repair it daily and you're good
I had a 73 F-100 back in the 80s and if only I knew then what I know now.......
Which engine did that one have? I've got a 400M in my 71 F100, which originally had a 390 in it. Thanks for watching David!
@@MortskeRepair I honestly don't remember what was in that truck. Didn't have it very long.
I dearly remember only 4 engines. a Chevy 250 six that was in my 64 half ton sbss. The only way you could have blown it up was to drain the oil. With any revs the lifters collapsed.
a Ford 300 six that was in our 92 F150. Torque and mileage! The little 4 banger in a 75 Datsun truck. And the 5.7 Vortec in my 99 Chevy 2500.
@@davidharmier6518 A great list of engines! Well, I don't know much about the Datsun I guess...
Makes a guy think Jb weld outta come out with an expanding foam product I can see the ad now rebuild the whole car in three minutes and just grind smooth!
Brilliant!
I hope you put the air cleaner back on at 28:45 😂😅
It'll be fine!! Thanks for watching!
Old trucks all day.
Beaters with heaters! Thanks for watching!
Yep love the will it starts keep it up and godbless
Thanks a lot for watching! Glad you liked it Brian!
Please please turn of the fisheye lens makes a guy crossed eyed. I’m crying down my back. Excellent content. Sub’d 👍
I'll do better next time! Sorry!!
wearing shorts with long sleeve shirt..LOL fashion statement for the day
Follow me for more fashion tips!!
It's all Factree!
Except for the body filler. That's definitely an add on accessory! Thanks for watching!
you can't beat $50. it's worth over twice that for scrap. as hard as she cranks, i'd say the timing is a tad off. she's a beater, does she have a heater? winter's a coming, and without a bed, she'd be a fishtailin', donut machine. i bet there's a new home for her out there somewhere. you just gotta find some kid with stars in his eyes, more dollars than sense, and bob's yer uncle.
Bahaha "Bob's yer uncle" I had to look that up when I watched World's Fastest Indian!! Gonna need to add some weight to the back for winter traction! Thanks for watching!
apparently you did not see the wire stripers in the floorboard. blue and yellow pair.. oh wait u found em haha
Score!!
de oxid is your friend :)