Edelbrock Performer 400 Intake Manifold Install on Midnight Maroon
Vložit
- čas přidán 6. 09. 2024
- Edelbrock Performer 400 Intake Manifold Install on #midnightmaroon
While we wait for UPS to locate our Carburetor we prep and install the new intake manifold. MAN that thing looks good!!!
Although I bought mine on FB Marketplace, here's the Amazon Affiliate Link (I get paid if you use these links to purchase anything from Amazon):
Edelbrock Performer 400 Intake Manifold for 351M -
351M Intake Manifold Gasket - amzn.to/3MpcxeC
AIM Penetrating Lube - amzn.to/3U3jPW0
Permatex Ultra Black Sealant - amzn.to/3QIB40M
** MERCH Site **
troysgarage.my...
Send me stuff:
Troy's Garage CZcams Channel
4956 West 6200 South - Box 235
Salt Lake City, UT 84118
Check me out in other places:
Instagram: / troysgarage
Id agree and say Vacuum advance and brake booster is all you need Troy. The lines coming from the tank is most likely supposed to go to a soup can looking thing for fuel vapors. Its a charcoal canister. Not required if Utah doesn't need anything for smog.
Correct! That’s exactly where that connected to. When you said canister I remembered unplugging that back in the day. WINNER!!!
@@troysgarage I tossed my charcoal canister on my truck, but I wish I had kept it just to keep from smelling fuel vapors from the fuel tank vents on hot days. It doesn't necessarily need to be hooked up to anything other than the fuel tank vent line.
@@MattsRageFitGarage that makes sense. I’m gonna wish the same thing. Dang it! 🤔
I just did the same on my 400. I’ve got a 77 F150 that had a blown up 351m. I picked up a 400 off marketplace. Im doing a lot of the same things you went through. I can’t wait to see the “finished” product.
Hopefully that’s coming soon!
Good to see more of Midnight Maroon lately! 👏🏼
Feels good to make progress too. 🙌🏼
Any cons to not using the metal valley pan?
Great work Troy. I need to do that intake and carb swap to my 79. Along with an HEI distributor.
Careful those HEI’s throw out some serious lightning! Both me and neighbor Joe got lit up in the same day. Hahaha
You sir just made me want to do the same thing to my 400.
It’s a cool upgrade and eliminates about 40 pounds on the front end.
Hey Troy I think that intake may be on backwards. The bracket with the spring for the throttle should be on the drivers side
It is on the drivers side. I’m gonna have to go back and watch my own video again to see why you’d say that. 🤷🏼♂️ I know it’s right cuz at this point I’ve already mounted the carb (next week’s video).
13:59
Dude! What the? Seriously don’t remember that but you are absolutely correct. It’s right now cuz the return spring is hooked up. I do not remember turning it around either. I’m losing my mind! 🤪😱
@@troysgaragehahahaha perks of being overworked and sleep deprived! Love the midnight maroon content! Can’t wait for what’s next!
NPT refers to national pipe thread and there no 5/8" NPT. It goes from 3/8" to 1/2" and the 3/4". There is no other sizes in between. From what I can see, that looks like a 1/2" Npt size.
I totally believe you, cuz I have no knowledge otherwise, but I was reading it right off the label from the product packaging. (shrug)
The only vacuum you need on that truck?
Brake booster
An timming advanced
As far as I know. 🤷🏼♂️ If someone knows of something else that needs vacuum on this let me know. I ditched all the smog crap. I do have a “vent” tube coming forward from the fuel tank. Maybe that needs to go to a vacuum source? Can’t remember where that was originally connected. Thoughts?
Just make sure to plug or use PCV
I don't know what carb you are going to run, but unless you plan to run a carb spacer, those carb studs are going to be too long. I just found this out...I transferred my studs over to a Holley manifold and with a Holley 600 - studs were way too long. I forgot about all the EGR stuff mounted between the carb and manifold. accounts for the difference for me at least. Going to get a new set from Orielly's ($13) - ironically - HTH
Tune in next week for the rest of the story. There’s a plan in place. 🕺🏼🤘🏼
Maybe i missed it but when you’re hand tightening or torquing the intake down do you go in a diagonal pattern and 2-3 times or what’s that process? Love the videos can’t wait to see Midnight Maroon do a crazy burnout down the neighborhood!!
You are correct there is a pattern to torquing down the intake. Every motor is different so double check the googles every time. For this one it’s basically inside to outside in a rotating pattern. I torqued this down 2 days later when I had time to mess with the carb and get it mounted. (Another viewer noticed I put the intake on backwards too, I might be losing my mind cuz I don’t remember turning it back around but it’s on correctly now 🤷🏼♂️)
@@troysgarage awesome! Will always double check the patterns needed! That’s hilarious! Probably flipped it around when noticing the carb wouldn’t go on correctly?
@@Rigs__Rigs You'd think that would spark a memory. I was camera rolling during that. I simply don't remember and that concerns me greatly! My memory isn't what it used to be.
What kind of intake? Do you have a model number.
Sorry for the delayed response. It's this one: amzn.to/3V8sk4X
@@troysgarage appreciate your feedback. I have a 351m and looking to replace my two barrel.
@moe477. It’s quite the upgrade. Have you don’t anything exhaust wise? I went true dual. There’s a video of that as well.
@@troysgarage that’s the plan. I have single then y out. But I plan on duel. Keep up the good content. Love it. Can’t wait what you do on your new project you have going on at the moment. 👍
@moe477. Thanks so much got some other cool stuff in the works too. Share with your friends. Trying to take this to the next level! 🙌🏼