Video není dostupné.
Omlouváme se.
Victron Energy NS charging station for your electric vehicle
Vložit
- čas přidán 14. 08. 2024
- #cstech #victronenergy #chargingstation
This is the new Victron Energy charging station that allows you to charge your electric vehicle more smarter directly from the sun and using in some cases only the excess from your PV system.
Is fully integrated into Victron Energy VRM portal and all information is detailed so you can easy see the energy flow from you PV System.
If you want to by and still want a delivery to Europe, we can handle via our marketplace platform www.pvshop.ro
☀️ Inverter: l.profitshare....
☀️ Inverter: cutt.ly/Qc9Jqed
☀️PV Panels: cutt.ly/Qc9Jk8V
Our gear:
📷 Camera: cutt.ly/jgwMMpX
📷 Lents: cutt.ly/9gwMM31
📷 Lents: cutt.ly/xgi5t90
🎙️ Mic: cutt.ly/egwM9LS
⚡️Lights: cutt.ly/7gi73Q5
🎬 Gimbal: cutt.ly/ogi77cp
Follow us:
▶️ Facebook: / cstechromania
▶️ Instagram: / cstechromania
▶️ Twitter: / cstechromania
▶️ Reddit: / cstechromania
▶️ Web: www.cstech.ro
▶️ Email (just for collaboration): contact@cstech.ro
Your English is good. Thanks for the Video!
first class review and first class English, thankyou From Clive Stillerman South Africa
Even if you are not "native English speaker" It is well explained, thanks.
Which other equipment would you advice to me for:
- 16 pannels 550 watt peak oriented to South + 16 Pannels 550 watt peak oriented West. (in Luxemburg).-Both without shadow effects-
- A 14 kilowat capacity battery pack (48 volts 280 amp ) in lithium. (self made with BMS ...).
- All this will be OFF GRID with help of a diesel generator when necessary in winter to reload batteries. (+ loading my EV)
- I would like to set following priorities: First "suitable level of batteries for our home" (consumption +/-15 kwh/day time and 5 kwh night time)- Than loading our EV cars when we need in day time- Than electric boiler - than if remains some thing electric radiators or airco. (220 or 400 volts i can live with both...) Thanks Guy
I plan to install two ev chargers together with Cerbo and Smart meter(at grid input), is it possibile to configure the system with power sharing between EVcharger1-EVcharger2? The home will have the highest power priority.
You can do easy whit Cerbo and a smart meter from Victron. All rules can be written in NODERED inside Cerbo and from there you can do you own rules. Example. if EV1 is charging and EV2 just connected...set EV1 to 10A and so on.
Thank you, You have explained all I need to know. Is there any way to use the EV charging station to feed the house from your EV? Can you put the ETI safety switch type here?
Hello! You can’t in this moment to make car battery to house load. As I know Tesla will release this next year but not so much information available right now. I read that also VW will allow this. Basically is a car feature not charging station, but I think once will be available, Victron will allow :)
nice video , thank u!!
what if your off grid will it still work smart ?? does it have frequency shift control ?
I will make a video in off-grid mode :)
Hi does this charger support v2g or v2l. And also can it bring DC power direct to the car?
Is AC
For me this charger would be perfect if it had one more thing: dynamic load under manual mode. Right now when the car is charging from grid, it doesn't account for the actual consumption of the house, which is a problem.
You need a GX device and a smart meter for that.
Is it possible to feed the power cable (3 fase) into the NS from the back, or is it only possible from the bottom?
Yes
@@thecstechvideosThank you. You will not believe it. I called Victron HQ (I live in the same city, and they are about 3km from here), and they did not know.
My dad will order one today!
@iamkian That they send me the charging station, to help viewers :)
@@cstechromania They should send me one too... Even better. I can pick it up. Victron HQ is only 3 km away from me :-)
But still I can not believe it that they (Victron) did not know!. And even Google did not help.
I talk whit them and seems in HQ is only office thing. The support should be offered by dealers/installers and us :)