yo congrats to Steven on his full time job at thecubicle! It'll be nice to see him in future videos again (maybe more random fun videos like guessing the cube based on reviews pt 2? )😮
A hybrid between the GAN 12 and the Tornado V3 sounds promising. Can‘t wait for my bc spring version. And congrats to Steven on the full-time job. He‘s a great addition to The Cubicle team.
@@chess9478should I go for the BC spring or maglev version? Most of my cubes are maglev and I like them very fast, but I’ve seen so many people recommend springs over maglev for these flagship cubes nowadays, so I’m not sure. What’s the benefit of springs over maglev?
@@alisyed294 The usual benefit of maglev over springs is less friction and no spring noise. If you do like Maglev I do think you should get that one, but if you think that Maglev cubes are way too fast and are bad to use I would say that getting the spring version is better. It is a matter of personal preference mainly.
The cubing on the side should replace Subway Surfers completely. All jokes aside, thanks for the insight on the cube! It was fun to hear all the opinions as always
Been waiting for this vid for weeks! Love how in-depth the reviews were, especially with how different everyone found it from the V9. I’ll try it one day. The curse of the collector: I know I’m gonna get it eventually.
I personally think this might be fine for someone like myself who uses a Dayan guhong v1 tightened about as much as possible as my “practice cube” to get better at precise turning
Actually, there's a solution to aggresive solvers's problem with the Weilong v10, that is remove the orange gear of the dual adjustment system and keep everything the same. I tried this way and it makes the weilong v10 less snappy, rigid, blocky and make it more flexible, has better corner-cutting ability yet bit more fluid. The downside to this method is that if you remove the orange gear, the dual adjustment would be useless so you cannot adjust the cube anymore. But maybe this solution will give you guys noticable and huge difference, so please try this method in a video!
Like the TV3 (pioneer) and GAN 12 might suit me, but I turn aggressively, and I'm great with the V9. Should I get the spring bc v10 or the maglev bc v10?
I was outside of my country and preordered it waiting for it when i come back soon. I really like the feeling of the gan 12 but havent enjoyed the wrm v9 fully. I also enjoyed the V3 but wasnt performing properly. Maybe this cube is gonna do it
Does moyu still have loose magnet problems like the V9 and the Aoshi had? Also, would the blocky and snappy qualities of this be comparable to the Guhong v4?
3:00 Said something with the exact same meaning though not exact phrasing "should have called it Aolong v4" in my unboxing. Saw Cubehead's video and his opinion is quite similar as well. Totally different mech.
I dont know why they made the repeling magnets smaller.cause i added extra magnets on the Edge and the auto alignment and the feeling in the cube has a much better feeling.dont know why they nerf it.and it helps the cube feel the 20 ball core more
Hey. The best way handle this is to email customer service with your order number. We can use that to find your order and figure out what's going on. Hope this helps.
I've heard some people having issues with the core stems breaking. Has this been an actual issue or is it just some people getting really unlucky? Also f to the solve at the start
Hey cubicle i just want to ask if the weilong v10 is good quality or durable because i have seen some videos of it breaking or popping after only limited use so i would just want to know your answer
The first one I got broke right away but I have a new one on order. The axes in the V10 is plastic rather than steel like the V9 has. I’m hoping there were just a few defective cubes from the factory and the rest are ok. I did read that you can take apart the cube by disassembling the adjustment system then removing that center piece instead of popping an edge out like normal. I will do this with the new one in hopes it doesn’t break
Like a GAN cube?!? Great, I definitely don’t want it, haha. Not to be rude, but GAN just never feels right to me. The only thing that intrigued me was when someone said it’s like the YS3, which is my main. But it doesn’t feel block to me, it is very forgiving and works with me the best. But I ain’t too fast, haha
gan 11 vs tornado v3 vs gushing vs gan 13 I have 40 dollars and I need to know what I should get I have a tornado v3 standard and the magnets aren't what I'm used to I main the ys3m with angstrom combo w/ mystic I also looove the wailing v9 with the angstrom combo
Which V9 version did you try? The original ballcore is very different than the 20-mag ballcore imo. 20-mag is better for me as the magnets are not as strong and it’s more flexible/flowy imo.
@@actualglacier I agree, regular bc magnets are too strong. 20-mag is much better imo, but special edition 20-mag V9 is best. It has springs instead of maglev which helps stop overturning a bit. To each their own, I really like that one. Looking forward to trying the V10 if I get one that doesn’t break right away this time lol
![The Best 3x3 Speed Cube of 2024..? [Moyu Weilong v10]](http://i.ytimg.com/vi/rjUg8zlqrtE/mqdefault.jpg)
![The Best 3x3 Speed Cube of 2024..? [Moyu Weilong v10]](/img/tr.png)
Ayy congrats Steven 👏
i love your channel cubehead! :D
Cubehead when are you going to review it
brain dead replies my goodness
@@christophermancilla1862he did
Hi
thanks for having me!
Your the 4bld guy
How do you do that trick such that all cubes become identical in your hands? Haha
PLS upload
ur hot
Thanks for letting me try out this puzzle!! It was such an honor being on the channel again!
yo congrats to Steven on his full time job at thecubicle! It'll be nice to see him in future videos again (maybe more random fun videos like guessing the cube based on reviews pt 2? )😮
👀
👀
i cant wait to get this cube, i ordered it a couple days ago from the shop and im soooo excited!
Wow that kid Aaron is good! It would be so cool to meet him at a comp sometime….
I agree! He also seems good at clock I wish he would teach me Bpaul 7sf
🤯
I actually haven’t met him :(
@@ethanlastname4089just look it up
Wow, you’re right! I really wish I could meet him!
A hybrid between the GAN 12 and the Tornado V3 sounds promising. Can‘t wait for my bc spring version. And congrats to Steven on the full-time job. He‘s a great addition to The Cubicle team.
The BC Spring version is very good. I think you will like it if you like the TV3
@@chess9478should I go for the BC spring or maglev version? Most of my cubes are maglev and I like them very fast, but I’ve seen so many people recommend springs over maglev for these flagship cubes nowadays, so I’m not sure. What’s the benefit of springs over maglev?
@@alisyed294 spring is lightweight which faster solvers enjoy, while maglev is fast and blocky
@@alisyed294 The usual benefit of maglev over springs is less friction and no spring noise. If you do like Maglev I do think you should get that one, but if you think that Maglev cubes are way too fast and are bad to use I would say that getting the spring version is better. It is a matter of personal preference mainly.
@@chess9478Compared to v5, which one is more blocky?
Congratulations Steven! Good Luck with the move. It was nice to see Stanley in the video.
The cubing on the side should replace Subway Surfers completely. All jokes aside, thanks for the insight on the cube! It was fun to hear all the opinions as always
That Aaron cameo was insane!!
Been waiting for this vid for weeks! Love how in-depth the reviews were, especially with how different everyone found it from the V9.
I’ll try it one day. The curse of the collector: I know I’m gonna get it eventually.
I got the maglev one and then copied Luke Garrett's settings. This cube's blockiness is what makes it so enjoyable to turn. Easily bacame my main.
What are his settings!
3:01 That J perm though
I personally think this might be fine for someone like myself who uses a Dayan guhong v1 tightened about as much as possible as my “practice cube” to get better at precise turning
Ha! This cube is indeed like a premium Guhong, which is exactly what I was looking for BTW!
Congrats Steven!!!
i was so hyped for this video! nice!
I bought a benmajin plushie and it is going to get here tomorrow ... I AM SO EXITED !!!!!!!!!!!!!!
Congrats on the job Steven you deserve it
Aaron is really fast and good!
love you steven! congrats on the job
YOOOO AARON MADE IT ON A CUBICLE VIDEO
Stoked to see Steven in more vids
Would love to have Aaron’s turning style ngl
Actually, there's a solution to aggresive solvers's problem with the Weilong v10, that is remove the orange gear of the dual adjustment system and keep everything the same. I tried this way and it makes the weilong v10 less snappy, rigid, blocky and make it more flexible, has better corner-cutting ability yet bit more fluid. The downside to this method is that if you remove the orange gear, the dual adjustment would be useless so you cannot adjust the cube anymore. But maybe this solution will give you guys noticable and huge difference, so please try this method in a video!
I made it loose and put stronger magnets in my v10 and it made me like it more
Got it from cubicle and I love it so far out of the box
Jules would be great in an Old Spice commercial. He should do a commercial of all the main cubes at the Cubicle.
Can't wait for mine to come! :D
3:30 in and it sounds like a moyu gan 12. Definitely curious to try!
Dang Aaron turns like Ruihang :0
bro jules what is that hello kitty hoddie
You should make tymon use this wrm v10 and see what his thoughts on this cube then post itt
Like the TV3 (pioneer) and GAN 12 might suit me, but I turn aggressively, and I'm great with the V9. Should I get the spring bc v10 or the maglev bc v10?
Steven’s pyraminxes are so good, hope we’ll see more of them going forward
Unfortunately, as the DIY kits are very likely to be the only option going forward because it takes so long to make full puzzles
@@StevenWintringham Ah, that’s understandable
Aaron!!
yooo Steve is back boyys
mine will arrive today
Yay pyramid guy is coming back
My wrm v10 has a really weird noise when i turn it but idk how to fix ut mine is maglev any suggestions?
Possibly a loose magnet? See if you can isolate a piece that is rattling
💯 agree with Domion it also reminds me of the gan 13
I was outside of my country and preordered it waiting for it when i come back soon. I really like the feeling of the gan 12 but havent enjoyed the wrm v9 fully. I also enjoyed the V3 but wasnt performing properly. Maybe this cube is gonna do it
9:01, 9:12, the same solve back-to-back, but first it's a 9.57 and then a 9.58. Seriously though, thanks for the informative content
Me choosing Benjamin from the thumbnail
Does moyu still have loose magnet problems like the V9 and the Aoshi had? Also, would the blocky and snappy qualities of this be comparable to the Guhong v4?
Jules wearing a hello kitty hoodie?!😂
3:00 Said something with the exact same meaning though not exact phrasing "should have called it Aolong v4" in my unboxing. Saw Cubehead's video and his opinion is quite similar as well. Totally different mech.
Super Steven
The 9.57 and 9.58 lokled Like the exact same solve by Steven
Finally!
Jules is always the funny one😜
An everyone solves on the gan 5x5 as well please
I can't say much since I'm pot so paired up with cubes and I still got average of 20 sec😂
Damn just got my v9 and they drop a new wrm fk.
I dont know why they made the repeling magnets smaller.cause i added extra magnets on the Edge and the auto alignment and the feeling in the cube has a much better feeling.dont know why they nerf it.and it helps the cube feel the 20 ball core more
Choose my solver: aaron
Great
Use code kewbix if you love the cubicle. Love ur vids Phil
Where did Steven get that clock?
YEAHHH
Epic
Just commenting here to ask a question. I placed an order 7 days ago and it hasn’t been processed can someone help with that?
Hey. The best way handle this is to email customer service with your order number. We can use that to find your order and figure out what's going on. Hope this helps.
I've heard some people having issues with the core stems breaking. Has this been an actual issue or is it just some people getting really unlucky?
Also f to the solve at the start
Whats your setup? Mine feels weird bu5 i dont know how else to set it up
Is it worth it to get the cheapest version (Just magnetic) since I have a tight budget or should I look for other options
Get rs3m v5 for budget cube
@meraldlag4336 no. the standard rs3m v5 isnt great. get a tv3 or a rs3m 2020 or 2021
Hey cubicle i just want to ask if the weilong v10 is good quality or durable because i have seen some videos of it breaking or popping after only limited use so i would just want to know your answer
The first one I got broke right away but I have a new one on order. The axes in the V10 is plastic rather than steel like the V9 has. I’m hoping there were just a few defective cubes from the factory and the rest are ok. I did read that you can take apart the cube by disassembling the adjustment system then removing that center piece instead of popping an edge out like normal. I will do this with the new one in hopes it doesn’t break
Pls add max park
Should I buy moyu weilong wr m v10 classic or moyu rs3m v5 maglev?
Why didn’t cube head show up
Use code Kewbix!
Phil how many pll skips did you get for your part like WHAT
its cuz he was doing zblls as zz guarantees last layer cross
And COLL
what's wrong with everyone getting pll skips 😂
Can you all tell your settings you use?
And can YOU, who read this, and have a v10 tell me your preferred setting?
Gan cube MoYu made. And half the price?
Let I fly
20 seconds ago!
Like a GAN cube?!? Great, I definitely don’t want it, haha. Not to be rude, but GAN just never feels right to me. The only thing that intrigued me was when someone said it’s like the YS3, which is my main. But it doesn’t feel block to me, it is very forgiving and works with me the best. But I ain’t too fast, haha
hi bro 👋
whats better the spring 33 dollar or the maglev for 40 dollars i need to know plssss im buying one for my friend
Cubicle sent out an email linking this vid and had a post saying they recommend the spring ball pre version over the maglev.
gan 11 vs tornado v3 vs gushing vs gan 13 I have 40 dollars and I need to know what I should get I have a tornado v3 standard and the magnets aren't what I'm used to I main the ys3m with angstrom combo w/ mystic I also looove the wailing v9 with the angstrom combo
I menat to put the guhong pro
Gan 11 is probably the best for its price I main it and its amazing (does lock up sometimes tho)
@TheCubicle How did u set it up?
out of the box
I chose benmajin
❤
Is it stable as Wrm 2021?
Yooooooo
hi thecubicle whats ur opinion on fried chicken
Yoo
This cube is a main killer 💀
f
Any one see the mini plush
Ayooooo
Clickbait thumbnail! Benjamin didn't do any solves!
IM FIRST IN 20 SECONDS
I HAVE BEEN WAITING FOR THIS VIDEO FOR A WHILE. I WANNA TRY IT NEXT TIME I SEE YA PHIL
F... Rip weilong v10.....
Yo
Use code kewbix
It looks good but my aint gonna get me another 3x3😢
Use code Kewbix
it's interesting that jesse says the v9 is flowy when it's one of the blockier cubes I've tried. maybe the v10 is really not for me
Which V9 version did you try? The original ballcore is very different than the 20-mag ballcore imo. 20-mag is better for me as the magnets are not as strong and it’s more flexible/flowy imo.
@@Sulley1562 mine was the BC indeed. found the magnets way too strong
@@actualglacier I agree, regular bc magnets are too strong. 20-mag is much better imo, but special edition 20-mag V9 is best. It has springs instead of maglev which helps stop overturning a bit. To each their own, I really like that one. Looking forward to trying the V10 if I get one that doesn’t break right away this time lol
For me they couldve have sharpened the corner pieces of the v9 to prevent corner cutting and and added the new adjust ment system.base on my own v10
NOOOOO STEVEN FROM OHIO WONT BE STEVEN FROM OHIO ANYMORE
Use code Khoeb hed