toyota clutch actuator mmt p0900
Vložit
- čas přidán 9. 05. 2022
- this video is about servicing ( repairing) the clutch actuator
on a 2012 toyota yaris with the robotic gearbox and it was throwing a p0900 code for the clutch actuator and no gear would engage.
the owner got the clutch actuator back and everything is working properly
thanks for watching
please dont forget to subscribe. - Auta a dopravní prostředky
Its normal 2.3volt on the plug?
Good video, I cannot understand why you did not clean all the dust out before putting it back together though.
thanks for watching.
i did clean everything before the final assembly here in the video it was just to see if it was working properly since i had to remove the gear box to replace the clutch and when the gear box was out, it was all cleanned out.
hello, for me, this part pushes the clutch and won't let it back, please help, thanks
Thanks for the vid, I have Toyota Yaris freetronic and I have a huge problem with shifting, while turning on engine shifting not working at all, I sent it to the mechanic who did not know what to fix !! he changed the clutch but still cannot shift from 1 to 2 .. could you help me with an advise?
Did your mechanic set the gear box in service mode before taking it apart?
Thanks for this. Very help. Which Toyota model is this actuator from? Aygo, Yaris?? What year?
Thanks for watching
This is from a Toyota Auris 1.4 d4d 2012 but its pretty much the same to many of the toyota mmt's.
Where to buy the carbon brushes for this type of motor?
Thanks for watching.
I just went to a carpart store with the brushes in my hand and bought similar brushes...
Good luck
@@PSICompanyPerformance thank you for your reply. Does the shop have a website so that I can order online? How did you connect the wire of brushes? Do you have any video? Or advice?
@@makmedia887 i am sorry but it is a local parts shop i dont think that they have website,
just solder the brushes in place exactly the same way as you remove the old ones,
i am guessing that any car part store will have these brushes in stock.
good luck
Bonjour, j'ai une Auris Toyota année 2014, boite de vitesse CVT, type K310 , j'ai un problème au démarrage quand je mets le D et même le R , la voiture avance tres lentement puis s'arrête,la même chose pour la marche arrière, ma question à vous poser : est ce que ma boîte possède un Actionneur de vitesse, peut être celui qui est défectueux, ses charbons sont usés ???? prière et prière de m'expliquer ce phénomène, cordialement
Thanks for watching
that you are describing is the clutch pack that is gone, you need a new clutch disk fitted
just make sure to put the gear box in service mode before removing it from the car.
good luck
I think you put the spring thing the wrong way? 4:08
Thanks for watching
Maybe youre correct but after i took it all apart to clean and lube everything and put it back and its been good ever since...
No,at least cleaning is a minimum effort to do the job,put new grease 😮😮😮😮
Thats correct as soon as you are sure everything is working as it should of course you have to put new grease on a cleanned piece...but you have to test it first.