A Sponsored Review of a Crap RC Truck. You’re Welcome
Vložit
- čas přidán 29. 08. 2024
- It says it's a crawler hmmm...the Biggest Disappointment of 2022! (Possibly). I've been waiting ages for the MN999. A 1/10 Scale RC Land Rover Defender D90. It costs around $200 and it's certainly not something I'd recommend.
More info here: www.banggood.c...
This is better: ftx-rc.com/ind...
and this: s.click.aliexp...
and this: s.click.aliexp...
Merch: tomleyrc.com/
My Amazon RC Favourites: www.amazon.co....
If you Disliked this video because you Dislike me... Click Here: www.banggood.c...
If you enjoy the content please consider Supporting by Buying me a Coffee:
www.buymeacoff...
Copyright Free Music:
www.epidemicso...
filmstro.com/?...
My CZcams Tool: www.tubebuddy....
Facebook: / tomleyrc
Instagram: / tomleyrc
Twitter: / tomleyrcgarage
Tomley RC © 2022 Tomley Media Ltd. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of Tomley Media Ltd. - Zábava
My parents say the same thing but it more like 100k disappointment
🤣
Oh buggar
@@TomleyRC
They should have changed some things around on this for sure.
Like a cheaper lexan body with some of those plastic details instead of a full plastic body, Lipo like the 2200 mah that came with the wltoys 144001 would have been fine in this.
Mount steering servo on the front axle so servo struggles a bit less, possibly get a bit sharper steering angle as a bonus.
A few teeth smaller pinion & just have throttle & steering dual rate.
It's a weird combo of features that maybe would have worked on a smaller crawler with a 370 or 390 size motor but not this.
An actual 2s lipo instead of a lithium ion pack so it has some amperage out of the battery & you'll probably see some actual crawling out of this with a lighter body.
If you feel like wasting some time on this, feel free too try a few things starting with battery & fitting a smaller pinion gear on there, like 3 - 4 teeth down should help even the stock battery with extra torque.
Lucky you having parents, I was raised by an Alsation and a Burmese mountain dog.
@@ianmangham4570wth
Good on you for being honest on a sponsored/free product. Not all reviewers would do that.
Thanks for catching my comment on the live stream with regards passing this onto a youngster at the crawling event Phil . No doubt they will get the enjoyment out of it 👍
As a defender user I can say the scale is just a bit off. But the interior plastic quality looks spot on as does the cramped driving position 😂
Hahaha
Thanks for another great review. I was shocked to see an exposed circuit board. I thought those disappeared. You have reviewed so many reasonably priced crawlers I thought this one might be even better for the price. I don't think there was a lot of testing before it was released. I know the body is not perfect, but may be it will fit on another car. Your review is very valuable to anyone who was considering it.
they are actually on most china stuff today still WPL runs circuitboard but they are alot better than this junk who cant even last a run outside
Be cool whenever you’re making your next review, to take another crawler and have it run the lines. That way we can see that it’s underperforming against a baseline crawler. That ftx for example.
Can't believe they supply that paltry Li-ion battery with it. And an open board is ok on a £50 truck but not on one costing this much. On the plus side plenty of scope for improvement! 👍👍
Well for a RTR injora scaler not bad. All injora stuff, d90 body and 275 chassis buy them separately and you’ll spend more than that. Put a decent set of tires and weight in those beadlocks plus understand thats not a crawler but trail scaler and you’ll be fine.
It’s just generally crap overall. It says ‘Rock Crawler’ on the box.. but even a trail truck should be able to do some mild crawling… and not break after less than a battery pack 😅
Agree. Probably less disappointed if they do not include electronics on the box. 😬
It looks to me the failure is the battery, receiver/esc combo, and weight distribution. I have those tires on a couple of trucks and they work pretty good for me. The body is a little off, but it looks good enough. Cramped conditions for a 1/12 driver is par for course with 1/10 hard bodies, getting him in without amputating is a plus. The short wheelbase is probably better suited for an fj40. I think with better electronics and battery and a slightly higher price point would have been a better idea.
Say what you want but I love the fact that it holds a figure without modding, that's an extremely rare thing and at least for me absolutely everything.
Im totally in your opinion,,, I don't know why some people buy something like this when you get a Traxxas trx4 sport for 380$ and it's more than double quality,,, thanks for you review Tomley,,, road to 100k,,,I'm at your channel since 30k and your videos just gets better and better,,, big thumbs up👍
Thanks for the support for so long dude 👌
I think because the TRX 4 in the UK is OVER £500!!
It's massively over priced for what it is. But that's Traxxas for you.
Traxxas is only a good deal in America. Even in Canada It’s seven to $800 for a trx4
Traxxas not that cheap in Asia.
The electronics and chassis look kind of cheap but I actually like the body even if it's not an exact replica of the Land Rover. 👍
Shame it’s out of proportion. Could have been really nice
MN is an acquired taste. You either have to accept its silly light logic, cheap exposed circuit board, and bedspring shocks, or else be prepared to rip it all out and replace it. If you accept it, you have to stay within its limitations. The exposed circuit board looks to be the same as that in the RTR MN-86. That board will NOT accept a 3S battery (I speak from experience!). And I suspect that you burned one of your chips out running it against some of those rocks even with a 2S battery. I agree with you about RGT, except that those particular models, with the 390 motor, all have plastic transmission gears, which is the weak link there.
I think the front bumper makes it look really cheap and not very scale. Reminds me of a basher rc bumper.
Yes 👍
My sons MN 99s did the same exact thing twice! Even after replacing with a new stock motor and board, it quit again. All he was trying to do both times was get over a rock like you were. Got a bad taste in my mouth for MN Now.
0949 in Arkansas USA!!! Morning Tomley!!! Thanks for the vid I've been looking at these and you confirmed my fears.
Good Morning 🤟
The body looks to be the same as the Injora Defender body, I've got a 313mm "110" and its decent quality if not a bit wonky on the scale. The chassis/axles look like they could be Injora too with crap springs and electronics stuck on it. If it had decent shocks and electronics it should be half decent for the money...
Yes, they messed this one up!
Having built two trucks with parts from Injora and other brands form aliexpress, I can confirm that the whole chassis assembly is a cheap kit that is known for having stiff shocks, and tires wearing pretty fast if you crawl a lot on rocks. The body isn't bad in quality because I own a XJ Cherokee from them and it's pretty nice, the problem is that on this defender they messed up the proportions real bad, the windshield is too small, there should be less real estate under the "glass". In addition to that, the doors are way too small and make the side look weird. But the thing I dislike the most is the fact that they rushed in trying to recycle their standard 2-in-1 esc and reciever platform making one powerful enough to fit the 540 motor. They could have rebranded alrady existing gear kinda like other brands do. Overall this shows poor design choices, most of the parts can be bought right now separately from the internet, and the proprietary ones aren't in line with the quality of the MN99/99s for example. They were probably going to make one from the ground up, and that's probably what they're doing right now, but in the meantime, in order to attract people to the brand again they decided to release this hoping to get attention, they succeeded but not in a positive matter.
As mentioned before, this is literally just an injora setup. You can literally buy that exact chassis off Amazon lol. Shocks and all. Tires that came with those exact beadlocks as well. Big no from me. If I want to build this, I'd just buy the chassis off Amazon for $150
This truck looks like it was sourced from a bunch of Injora parts. Not sure how authentic MN it really is
It is, except it has crappy electronics
I have bought my fair share of these budget 1/10 rc’s because I thought I wanted to save money. They all were substandard and light years from Traxxas and nnAxial.
Then I bought a builder’s k bbb it TRX4 with the two speed and lockers. What a revelation!!
Now my cheap trucks are for visitors only. I watch this video and it brings back memories of those crappy over priced “cheap trucks”!
One nightmare was a $200 RGT Bronco that broke an axle in the first 10 mins taking it real slow!
The manufacturer wanted me to buy the axle and pay for shipping from China! Ya right!
It has a new use as an exquisite dust collector!
I had a bad turn with a
WL Toys recently as well.
I am so spoiled with my Traxxas. And I just bought an Axial SCX10 to test the waters. I am not disappointed with either models. I have stopped wasting my money on these sub par models.
If your looking for a 1/10 crawler for around that same price just get a ftx kanyon there actually really bloody good and was my first rc car
Tomley I met a guy at McDonald’s who said that he was you so I bought him a coffee soooo yeah when you get a chance I’m gonna need that coffee back 😂
No probs, I’ll get you one next time I’m in Maccy’s 👌
For the same price you can get an FTX fury which in my opinion is amazing
It does look a lot better with the mud on it.
Keep it up, and have fun.
Cheers Brian
i know where i would look the best , still sitting on the shelf of the sod who's trying to sell us these Pieces of S%&T
Love the hand 👌 it looks like it is something 007 would drive 😂😂😂
I am so glad you reviewed this bc I thought I really wanted this... not anymore.... rubbish
Took the words right out of my mouth Phil , was thinking the whole time "I'd rather have an ftx outback and some change" . What a wet fart of a truck (couldn't bring myself to call it a crawler 😂😂)
Yes, FTX are really good for the money
Wet fart is an accurate term to describe this turd for sure. What a disappointment
LOL!
He said wet fart....
It should be called a "kicker"... Guess why..
@@mikeupton5406 I thought I farted but I didn't...
I think a cheap esc and receiver setup in it wouldn't be to bad but I've noticed that with alot of the mn brand they either need to have wpl electronics in them when sold or you upgrade yourself
Throw an isdt esc70 and a Dumbo rc receiver in, at it would probably be a lot better, and not cost a lot of money. Still probably cheaper than buying the chassis and body from injora.
@@Br0rB yep it sure would be im using those cheap 5 buck esc one with dumborc one with another brand never had a issue
Looks spot on. I honestly thought it’s a 90.
Run defenders for 15 yrs 👍🏻
out from the box... i'm waterproof it and give it heatsink, also try it with 3s liion... still working until today...
yeah mn999 had bad esc and slow servo ....
Oh boy. Well I love your pointer!!!
Can u just stop being a scammer
Paul (?) you can't drive this thing properly man! The rear door opening constantly is a feature! When it happens - on a steep difficult obstacle - you say: "oh, the door came open, I better close it before I rip it off" Then as you push the door close, you give the truck a push, then it can conquer every obstacle on the course! 😅😂🤣
Oh thanks for showing the BOX, it does indeed have MN Model logos on it but is not listed anywhere on their website. It's not anything new and is basically a rebadged INJORA Defender.
I bet there is worse but you’re look has changed as before you were so enthusiastic about this kind tier and looked into upgrading and spending money on it. .
It ain’t great and the 99 is beter but it has spirit (inspiration).
Looks like it got caught between toy grade and hobby grade. The speed controller is embarrassing for something at that price point and it looked like they built it with spare part lying around. I did think the body was going in the right direction but even that is a little questionable.
Thank you for this review. I have watched a few running videos of this rig...And they made it look so capable...lol... But after seeing this video well we now know what to expect ..Thanks' for saving me my hard earned cash...I will not be getting this one ..lol..Big Thumbs' up Phil.
Paint it red looks more like a kids drawing of postman pats van.
In the bin
It’s a axial 2 clone frame , Body not that bad , just spray it Land Rover green and upgrade it👊🏻👍🏻
" It's a bit cheap, and nasty looking! "
Yes it is. 😆
"It's worse than that, it's dead Jim, dead Jim DEAD".!!
It is a badass looking shell
No complaining yet.
I almost pissed my self with the gopher clip...lol Alan Alan Alan haha 🤪😉
Makes the FTX Ravine look even better value for money. 😉
It would definitely need new electronics. What were they thinking for that price. Supply chain hike of product cost I guess.
Yes… crazy price for what you get
You could buy the FS Racing crawler for that amount. You'd then be getting basically an unbadged Axial SCX10 II (made in the old Axial factory)
Good test, bro
Oyi Oyi Mr Tomley! My Ball Mug made it too Atlanta in one piece! You sir, are a massive ball bag lol.
🤣🤣🤣🤣🤟
The Latin music made the test footage even more funny 😂
Great and honest review, Tomley! Thanks! 😃
But yeah... It doesn't look too bad, but... Yeah, better to stay away. 😕
Anyway, stay safe there with your family! 🖖😊
Still loving the hand 😻
A 540 geared that low should be able to spin those tires likes nothing.
Looks nice need to stiffn that suspension I think
Looks like they went through a Fasttrax bin and picked up the cheapest hideous parts they could find
Some of the Fastrax is actually okay… but I get what you mean
Absolutely hilarious, it's a crawler that looks upset crawling 🤣
😅
I love the one you lowered
Yeah, looks good 👌
Love the honest shilling good and out and open with the details of the video hell yea
Wow you con men are vary tanashis
best honest riview for this truck, good job sir.
Thank you
Hey Phil I pray that all is well. Great reviews,as always. Austin Powers is 1/9 scale. He’s from Neca. That’s why he won’t fit. I know that I sound like a nerd,but I’m actually a geek. I collect a lot of action figures and rc cars lol
Even if he was a little smaller he’d have not fit. But if he’s 1/9 then that would explain why I’ve not found a truck for him to drive yet 😅
@@TomleyRC and RC truck a 12.8 wheelbase would look with Austin Powers driving it,for sure. I love that you still have him around. I always look for him whenever I watch your videos lol
They also do not create the interiors to fit a proper sized figure either; the interior, seats and steering wheel is just to up the "gee whiz" factor and not to fit a figure in, like a Barbie car. It's just an afterthought and as we can see from the totally incorrect body and off-kilter proportions, who expects the interior to be precise or accurate?
@@Hjerte_Verke it’s so frustrating
Open electronics on a crawler? Madness!
Im glad i only paid $32 for my mn90, def worth
If you change the ESC, motor, servo, better battery, different shocks and sort out the top heavy and out of proportion chassis… it would be excellent!
then buy a chassis too while your there and have a not bad looking decent crawler :-)
Who else hates that some of the best bodies are on the cheapest stuff. The only hard bodies I’ve ever had are on some of my tamiya rigs. I’m eyeing that sexy injora rover body for my scx10
Get an Absima Sherpa cr3.4 awesome rig for the money 👌
Really not sure what to think of it . It looked like it could have been a sweet little truck . But it appears they missed the mark on so many bits especially the open circuit board 🤔. Maybe it should be priced around £100 ( being generous) ?. FTX certainly seems a far better buy. Nice upload Phil
Yes, those electronics are terrible!
@@TomleyRC something you would expect in a toy grade not hobby grade
No your not wrong that body is so odly proportioned and at that price point they proper cheaped out. Still think other than the proper High end RC Defenders the Double E E101 is the benchmark for scale maybe not quality as replaced most of mines driveline and electronics!
That double E 101 is kinda the grail for scale d110. I've honestly thought about just hanging in there and bitting the bullet an paying the 550 for it off Banggood.
@@Isuzu_Paul love mine it's just so imposing. Just finished upgrading it and will be taking it out for its first post refit shakedown!
That's a RINO horn on the hand held lol
It's a Phallus!
Should do a review on the new updated kanyon
Fully agree on alternatives👍.
It's definitely cute. HashtaG CUTE.
you should do a review on the Redcat E10 its a budget crawler and I think you will like it.
I've got an MN86 and it appears to be more capable than that. I'd say that the MN86 is actually about 1:16 scale based on what figures fit, so the MN999 is probably closer to 1:12 than 1:10. It's a shame, I was hoping that this would be a good step up from the MN86, especially given it's twice the price!
Yes, the 86 is my favourite MN 👌
Wheelspining means a loss of traction, can't say it has plenty of traction while it's sat there spinning it's tyres on the side of a rock
Bump steer on that haha
Haha
The remote looks like it's trying to be a mini clone of the Kyosho standard radio (the one you get with the inferno and outlaw and such).
out the box ECX Doomsday Barrage was a much better deal at 100-110 bucks "RTR", its properly geared 390 motor is plenty, decent ESC and steering servo too. this one by MN is being crippled by its electrics and its "side tippy and back flippy" just like the 1/12 original MN D90. at that price I'd want normal RC quality electrics, smaller pinion on a neutral timed 550 can motor (brushed 5 pole?), and some wheel weight! it should have 2200-3000 mah LiPo in the box too, or at least double the size of the lithium ion by running two packs like that one in parallel so it can deliver a little current without choking.
Ironic for an rc Reviewer to say he doesn't like to be swayed by other people's opinion. That being Said thanks for the vid great as always
Haha yeah… although I’ve always been like that. Even with people… I like to judge for myself
They probably put in just enough oil to keep the O-rings from drying out.
Oh, dear.
At least the MN 45 and MN 40 are quite cheap and easy to transform into really good, fun RCs, but this thing...best left on the warehouse shelf.
You need to glue some weights into the wheels inside the tires to lower the center of gravity.
Must admit my sons Ftx jimny/paso is a 1st timers cracking truck and it does really well. Obviously like you say this new mc is same price but not as good
Buy as a kit. Put your own radio in it. You can send me that one. I have a extra radio to put in it. 😁😁😁🇺🇸🇺🇸🇺🇸🚚
So it doesn't look quite right and "it just doesn't perform"?
It's the Mesut Özil of RC crawlers.
😅
Thanks for the review. I dodged the bullet on this one. It was next on my list.
Nice from far, far from nice. Thanks to the footage/location anyway
I bought a CMJ crawler in hospital from ebay, ex demo for £4.99... turned out to be fully proportional, plus body change mode. Incredible, toy grade, but has a brake for crawling. P
Scammer.
Tires are all wobbly
It looks like one of those caricature car drawings with how squashed it is 👌
Like any of their other offerings, it looks like they wanted a hardbody out there sitting on a chassis that can be heavily modified. Almost zero crawlers stay the same out of the box within a few weeks. It's no different with MN. They did miss the mark on the proportions of this hardbody. Just have a look at any RC4WD D90 and you'll see that they got it all wrong. It's like they asked redcat to build a lesser quality Gen7 so they could enter the 1/10 market on a budget. I already have a Gelande II D90 decked out to the nines. So there's NO WAY I'd ever cross this bridge. Only if I had money to burn and a build in mind.
The body proportions of the MN99s are quite spot on I think. It looks very scale to my eyes at least.
You can buy this chassis on eBay for like 100$ with only a motor and servo it an injora scx10 knock off
looks like the injoria chassis pretty sure it is the added a cheap esc body and lights
Hi Tomley please do a review of the austar hobby jeep cherokee xj!!
No brakes? Wow
I took the wpl 5 cell and put it in my controler . No more buying aa batterys
Needs a .49 Cox geared right down 👍
Hi, nice unboxing and car 😀
Thanks dude
Exactly... For the price .. u have nothing else to compare... So u can't just say, don't buy....
Today was the day I tested this belly dragger crawler soon to have two different moters . But with one moter it crawl so slow . I'm going to push it to it's 10 amp esc 12v moter to limits I'm sure it's at 15%power . Goin 2s 7.4 if it takes that then up the power I'll see wer it's happy then get second moter and esc . One brushless one brushed . Something different than everyone else I think but if anybody has please comment about
Amazing
When I saw this first, i thought this will good for me, but then that open cheap esc and electronic 3 speed made me not to and saved up a bit more and bought RGT ex 86010 JK pretty good and way better than this lame thing for sure.
RGT JK is very good
You get what you pay besides I consider it a good start hobby car